Emmet Electric Fan Instruction Manual, How to Use Emmet Stand Electric Fan

1.Why should the air volume of the electric fan not be too large and not too small (remote control series)?

Some consumers have relayed that the airflow of some of our fans (remote control series) should not be large or small, mainly because they use the function of natural air or sleeping air of electric fans. Our remote control series of electric fans have three functions: design ordinary wind, natural wind, sleep wind, etc., the air volume of ordinary wind is constant, and there will be no big or small; The natural wind is mainly aimed at the natural wind force should not be big or small, simulating the control circuit that can periodically change from strong to weak, and then control the speed of the motor will not be fast or slow; The principle of sleep wind is the same as that of natural wind, and it also uses a control circuit from strong to weak to control the speed of the motor. Reminder:

Consumers should choose the wind they need reasonably when using.

2.Why do some electric fans only tilt to one side?

Some consumers have reported that when some of our fans swing their heads, the angle of the heads is only biased to one side, rather than the left and right. The main reason is that the fan he uses has a segmented head. At present, there are two kinds of electric fans in our company, one is the automatic large head.

The swing angle of the fan using the automatic large head is fixed (the left and right swing angles are the same) and cannot be adjusted; The other is a segmented header. The swing angle of the fan using the segmented head can be adjusted at will, and there is no fixed angle. Reminder:

Consumers can adjust the angle of the fan swing head according to their own needs by moving the head (moving it in the direction they need).

3.How to remove the front and rear fan nets of an electric fan?

Some consumers report that the front and rear grilles of our electric fans are difficult to disassemble, but in fact, as long as you master the disassembly skills, it is very easy. First, open the transparent mesh clamp screws and mesh clamps, and then tap the plastic mesh ring with your hands left and right at the same time. Notice:

Do not use a straight line to pry the mesh to avoid damage to the grille.

4.Will the amount of negative ions produced by the negative ion electric fan gradually decrease over time?

Some consumers asked in the consultation whether the amount of negative ions produced by the negative ion electric fan will become less and less over time, which is negative. Emmett anion electric fan uses an ionizer, as long as the ionizer is energized, it can produce negative ions, and will not affect the concentration of negative ions due to the passage of time. Tips:

The negative ion generator used in Emmet electric fan can effectively eliminate smoke and dust, remove peculiar smell, sterilize and purify the air, which not only improves sleep quality, but also has a good effect on reducing blood pressure and enhancing myocardial function. In addition, the Aimite anion electric fan can start a variety of enzymes, promote metabolism, enhance the body's immune resistance to disease, and have analgesic effects on respiratory tract, bronchitis, chronic rhinitis, menopausal syndrome, and chronic diseases.

Assembly Instructions or Instructions for Use?

Hello, dear, turn on the on/off key, press the gear, enter the power size adjustment, increase it every time you press it, and cycle it when you reach the highest gear. According to the timing, you can set the time of shutting down the sail draft. The reservation button is the state of operation in the shutdown state, and the boot time can be set by pressing the reservation timing button.

Press the head button to swing the fan and press it again to turn off. Press the mode button to switch the product type, and change one type of wind type each time. There is also a negative ion button, which can be turned off once by pressing the switch again.

There is also a heating button, which should be operated in the godly switch state, which can heat the indoor air.

There are many Aimite electric fan maintenance points in China. You can click on the service outlets at the official website Gaochong station, and then select the area you need to view to see the corresponding maintenance network information published by it. Here's how to view it:

1. Enter Emmet on the computer, find its official ** and click to enter.

2. After the page jumps, enter the company's official **, click on the service above, and select the service network to enter.

3. Click the drop-down arrow on the service network page that appears and select the provincial region you want to view.

Hello dear, happy to answer your questions. Emmet electric fan maintenance method: first, dismantling:

Open the front grille, remove the fan blades, and remove the rear empty rolling net; Second, disassemble the riser: there is a screw on the top, Ning Song, and then the entire upper body can be removed; Third, remove the foot plate: there is a big screw at the bottom, Ning Song, and the tube can be removed from the foot plate.

Dismantling Emmet electric fan maintenance skills: 1. Unique tap-type grille, easy to disassemble and assemble; 2. Detachable chassis, save storage space, touch pitch angle adjustment, say goodbye to the trouble of hand twisting AS fan blades, soft and uniform air supply, three-stage air volume, 8-hour timing; 4. Dual-purpose platform and stand, height can be adjusted freely. From these characteristics of Emmet electric fans, we can roughly formulate the method of disassembling Emmet electric fans.

First, dismantle the head: open the front grille, remove the fan blades, and remove the rear net; Second, disassemble the riser: there is a screw on the top, Ning Song, and then the entire upper body can be removed; Third, dismantle the foot plate:

There is a big screw at the bottom, which is loose, and the tube can be removed from the foot plate. If you have already removed the Hail Aemet electric fan by the way, then I will continue to teach you some common Emmet electric fan fault repair skills. Generally, the wind will become less when the electric fan is permanent, or the leaves will not turn at all.

If the wind becomes smaller, this is considered normal, after all, the machine has a life cycle. If the leaf does not turn, then you can first check whether the power cord and the motor connection line are not connected because the old club falls off, if it is not for this reason, then the shaft of the motor driving the leaf has no lubricating oil, and you need a larger lubricating oil on the shaft.

Summary. Turn on the on/off key, press the gear, enter the power adjustment, increase it with each press, and cycle it when it reaches the highest gear. Press the timer to set the shutdown time.

The reservation button is operated in the shutdown state, and the start-up time can be set by pressing the reservation timer button. Press the head button to swing the fan and press it again to turn off. Press the mode button to switch the product type, and change one type of wind type each time.

There is also a negative ion button, which can be turned off once by pressing the switch again. There is also a heating button to be operated in the switching state.

Open the key to open the Huai Talk, press the gear, enter the electric service Tong volume size adjustment, increase each time you press it, and cycle to the most lead stool when it is high-end. Press the timer to set the shutdown time. The reservation button is operated in the shutdown state, and the start-up time can be set by pressing the reservation timer button.

Press the head button to swing the fan and press it again to turn off. Press the mode button to switch the product type, and change one type of wind type each time. There is also a negative ion button, which can be turned off once by pressing the switch again.

There is also a heating button to be operated in the switching state.

Excuse me, but please go into more detail?

Open the key to open the Huai Talk, press the gear, enter the electric service Tong volume size adjustment, increase each time you press it, and cycle to the most lead stool when it is high-end. Press the timer to set the shutdown time. The reservation button is operated in the shutdown state, and the start-up time can be set by pressing the reservation timer button.

Press the head button to swing the fan and press it again to turn off. Press the mode button to switch the product type, and change one type of wind type each time. There is also a negative ion button, which can be turned off once by pressing the switch again.

There is also a heating button to be operated in the switching state.

How to use Emmet Stand Electric Fan Hello pro 1The wind speed of the electric fan sail should not be too large, so that the human body has an adaptation process. It is best to control the indoor wind speed in meters per second, especially in well-ventilated rooms and places where there is excessive wind, and the wind speed of electric fans is even less likely to be too large.

2.The electric fan should not blow directly in front of people, blowing directly, the wind evil is easy to invade the body, especially when the body is weak or sweating, it is best to let the fan blow towards a corner. 3.

When sleeping, the air volume should not be turned on too much, when people are sleeping, the circulation of the human body slows down, and this is the most vulnerable time for the human body, the excessive air volume is blowing on the human body, which will cause the human body to be extremely uncomfortable, and the symptoms of fatigue in the human body will appear, and stroke will occur in severe cases. Hope mine is helpful to you, thank you and have a great day!