What are the characteristics of tile adhesives? How to use tile adhesives

Tile adhesive is a commonly used tile adhesive auxiliary material, which has a similar effect to cement, but has more advantages than cement, and is widely used in interior and exterior walls, floors, bathrooms, kitchens and other places. About brick adhesives, let's take a look at the characteristics of tile adhesives and how to construct ceramic tile adhesives!

What are the characteristics of tile adhesives?

1. Advanced technology.

The process of tile adhesive is more advanced, compared with cement, the prepared adhesive is mixed with water, blended into a paste-like adhesive, which can be scraped with a serrated trowel to create a uniform thickness of the standing layer.

2. Save the amount of materials.

Even if there is only an adhesive layer, it can produce enough adhesion, so the tile adhesive can greatly reduce the amount of material used and save costs.

3. It can ensure the quality of the project.

Tile adhesive also has the characteristics of strong adhesion, reducing delamination and peeling, so it can be used in tile decoration to avoid hollowing and cracking after long-term use, and enhance the protection function of the wall. Moreover, some materials are added with hydrophobicity, so that the tile adhesive also has the function of anti-seepage and anti-pan alkali of the wall.

4. Stable product quality.

When using the product, it needs to be mixed dry in advance, and then mixed with water, which is simple and convenient to operate.

5. Conducive to environmental protection.

Tile adhesive can reduce waste, environmental protection without adding toxic substances, and the adhesive effect is very strong, in line with environmental protection requirements.

How to apply tile adhesive.

1. First of all, the surface of the tile that needs to be glued should be kept firm, smooth and clean, without pollution and hollowing.

2. When starting to pave, first hang the vertical line on the wall leveling layer to determine the size line of the tile out of the wall, so that the surface of the tile is very smooth.

3. When the tile adhesive is constructed, the materials should be mixed first, such as adding about 20kg of tile adhesive to the amount of water, and then stirring evenly with an electric mixer, leaving it for 5-10 minutes and then stirring again. The adhesive material should not be too thick or too thin, otherwise it will not be firm when pasting the tile.

4. After that, use a toothed scraper to evenly wipe the glue on the back of the tile, scrape about 1 each time, and then knead the tile on the wall.

5. If the back hook of the pasted tile is relatively deep, it is necessary to use a toothed scraper to wipe the glue on the back of the brick to ensure that the paste is full.

6. Finally, after the tile is pasted, it is necessary to scrub the surface with a wet sponge according to the pollution of the entire tile wall.

Summary: What are the characteristics of tile adhesives and how to construct ceramic tile adhesives, I believe everyone understands it! Tile adhesive is an environmentally friendly material that has a very good adhesion effect, which is better than cement.

The characteristics of tile adhesive is that the tile is relatively fast, not easy to fall off, not easy to appear hollow, tile adhesive directly with water to mix it well.

Tile adhesive technology is advanced, which is better than cement; Save the amount of materials and save costs; Strong adhesion, reduce delamination and peeling, ensure the quality of the project, etc., as long as the material package is mixed and stirred according to the specified water distribution ratio, and let stand for 5 minutes in a non-agglomerated state, and then stirred can be used.

Tile adhesive is also called marble glue and marble glue. There is a fairly strong effect of bonding tiles, sometimes smashed with a hammer, the tiles are broken, and the marble glue is fine. The use of marble glue should be combined with the use of curing agent to have an effect, and the ratio of each marble glue and curing agent is different.

Do you know how to use tile adhesives? Ourstile adhesivesHow to use some methods and skills our friends can see how to introduce, as well as how to use our tile adhesive and some are to introduce what ingredients make up the product of tile adhesive, what are its advantages, and what are the precautions for our friends in how to use ceramic tile adhesive.

First, the characteristics of ceramic tile adhesive introduction.

1. Tile adhesive, also known as tile adhesive or tile adhesive, as well as tile adhesive, is divided into ordinary type, polymer type, heavy brick type, mainly used for pasting ceramic tiles, face tiles, floor tiles and other decorative materials, widely used in interior and exterior walls, ground, bathroom, kitchen and other building finishing decoration places.

2. Tile adhesive is a non-toxic, odorless, non-polluting environmental protection product. It can greatly improve the bonding strength between the finishing material and the substrate, anti-slip, has good water resistance, acid and alkali resistance and aging resistance, can withstand the test of dry and wet alternation and cold and hot alternation, and completely solves the disadvantages of directly pasting with cement.

Second, the use of tile adhesive.

1. Mix and stir a package of materials according to the specified water distribution ratio, stir until it is uniform and free of agglomeration, let the slurry stand for 3 to 5 minutes, stir again, and then use.

2. Choose the appropriate toothed scraper to ensure that the effective pasting area is at least 65% of the area of the tile.

3. Use a special toothed scraper to fill the base surface of the mortar with a thickness of 3 to 5 mm (that is, the thickness of the slurry on the tile), and then use the side of the scraper with a tooth shape to pull out a stripe in a straight line or S shape, and the scraper plane and the base plane intersect at 45 degrees to 60 degrees. Tiles do not have to be soaked in water.

4. Just paste it on the wall and ground in the order of arrangement and compact. And adjust the position of the tiles within the stipulated time. Undried adhesive can be removed with water, but can only be removed mechanically after curing.

5. The most important thing is the ratio of adhesive and water, which is generally adopted, and only a little water is enough. After mixing it, it is stirred evenly, and then it can be carried out to the next step, that is, construction.

6. If you use tile adhesive, you don't need to use the method of dipping bricks like cement, you only need to paste it on the wall and ground in order and compact it. However, during the bonding process, it is necessary to ensure that the binder covers most of the surface of the tile.

3. Precautions for tile adhesives.

1. Before construction, it is necessary to confirm the flatness of the working face.

2. Clean the finish with a damp sponge or cloth before the glue is dry.

3. Do not mix the dried glue with water before use.

4. Pedestrians or caulking can be carried out only after 24 hours of paving.

5. If it is used for large tiles and stones with low water absorption, it is recommended to use it with Aoneng F90-4 mortar companion, and the effect is more ideal.

6. This product is suitable for use in an environment of 5 40 degrees Celsius, and should not be constructed under rain.

This year-old wide chain is the introduction of some of the features and benefits of our tile adhesive, and what are some of the correct ways to use our tile adhesive, and what are the precautions for tile adhesive in the process of use, if friends still want to know more decoration information, **** thank you!

Tile adhesive can avoid the problem caused by tile soaking or insufficient sprinkling, but the use of strong tile adhesive should pay attention to its use, improper use will also cause the problem of tile falling off, so the following will introduce the use of tile adhesive, let's learn about it!

1. Before construction, use a damp cloth or brush to remove the impurities on the back of the tile.

2. Lay the tile flat, and then use a brush or long-bristle roller to evenly apply the tile adhesive to the back of the tile.

3. It can be paved in turn, and it can be fine-tuned within 10 minutes.

4. If a large area is constructed, the back of the tile needs to be brushed with clean water.

5. Use a toothed scraper to evenly wipe the tile glue on the back of the tile and the wall, and wipe about 1 each time.

What are the types of tile adhesives?

1. Polymer tile adhesive.

The adhesive of polymer tile adhesive is relatively high, the water resistance is also relatively good, and the operation is convenient; If the adhesion of the adhesive is required, this type can be selected.

2. Ordinary tile adhesive.

Ordinary tile adhesive is very convenient to use, no need to soak the tile, can be directly constructed, and also has the advantages of good impermeability, crack resistance, high temperature resistance, non-toxic and environmental protection.

3. Heavy brick tile adhesive.

If the tile you buy is a heavy brick type, you can choose a heavy brick tile adhesive, this type of adhesive can prevent the tile from falling off due to poor adhesion. Heavy brick adhesive completely solves the problem that ordinary adhesive can not be attached to the outside of the tile, which is more worry-free and convenient, and has 3-5 times the strength of ordinary ceramic tile adhesive, which can save construction costs.

4. Flooring and stone adhesives.

This type of adhesive is dedicated to the bonding of flooring and stone, the setting time of good floor glue is very short, and the bonding strength is high, the service life is long, and the owners of the decoration are more high-end can choose this adhesive.

Tile adhesive is a cement-based adhesive material for pasting ceramic tiles, also known as tile adhesive, which is one of the most important varieties of dry mortar and is the most commonly used adhesive material in building decoration projects. So what exactly is tile adhesive and what are the advantages of tile adhesive? Let's find out.

What is tile adhesive.

Tile adhesive is also called tile adhesive, which can reduce the dependence of the traditional ceramic tile construction technology on the process of sprinkling and soaking bricks on the base, and better avoid the problem of poor adhesion caused by soaking bricks and insufficient sprinkling.

Tile adhesive is mainly used for pasting decorative materials such as tiles, face tiles, floor tiles, etc., and is widely used in interior and exterior walls, floors, bathrooms, kitchens and other building finishing decoration places. Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction, which is a very ideal bonding material.

Tile adhesive (adhesive) solves the problem that some tiles cannot be pasted with ordinary tile adhesives, which is convenient and convenient, so you don't have to worry about shoveling off the tile and re-pasting it or sticking it outside with adhesive.

There is no need to soak bricks in the construction, good flexibility, impermeability, anti-cracking, good aging resistance, high temperature resistance, freeze-thaw resistance, non-toxic and environmental protection, and simple application. Advantages of tile adhesives.

1. Advanced technology: the prepared tile adhesive can be mixed with water to form a paste adhesive, and a uniform thickness of the standing layer can be scraped with a serrated trowel, and then the tile can be pushed and pressed into the tile adhesive in the adhesive layer. 2. Save the amount of materials.

Tile adhesives can also create enough adhesion with a thin adhesive layer to prove that tile adhesives can significantly reduce the amount of material used.

3. It can ensure the quality of the project: the tile adhesive has strong adhesion, reduces the opportunity of delamination and peeling, can ensure the quality of the project, avoid the problem of hollowing and cracking after long-term use, reduce the chance of cracks, and enhance the protection function of the wall. Part of the ceramic tile paste dry mortar with hydrophobic redispersible latex powder also has the function of anti-seepage and anti-pan of the wall.

4. Stable product quality: the factory is pre-mixed with dry mixing, and the quality is stable. Add water and stir, simple and convenient, and the quality is easy to control.

5. Conducive to environmental protection: tile adhesive can reduce waste, no toxic additives, and fully meet the requirements of environmental protection.

Types and characteristics of tile adhesives.

1. Characteristics of ordinary ceramic tile adhesive: no need to soak bricks in construction, good flexibility, impermeability, crack resistance, good aging resistance, high temperature resistance, freeze-thaw resistance, non-toxic and environmental protection, and easy construction.

2. Characteristics of polymer tile adhesive: strong adhesion, good water resistance, good durability, easy operation, high shear performance, can be used as an interface agent adhesive double effect.

3. Heavy brick tile adhesive special cavity point: heavy brick tile adhesive is specially designed to solve the design formula of ordinary tile adhesive some tiles can not be pasted, heavy brick tile adhesive can be pasted on the outside of the tile, completely eliminate the problem that ordinary adhesive can not be pasted outside the tile, worry-free and convenient, do not have to worry about shoveling off the tile and re-pasting it or sticking it outside with adhesive and afraid of falling off.