-
This answer is what I have seen in the past and I hope it will help you!!
1. Check the appearance parts of the watch.
The exterior of the watch can be inspected from the case, glass, dial, and hour, minute, and second hands. The case should be free of sand holes and obvious scratches, with symmetrical edges and corners; The screwing place between the back cover and the upper shell should be tight; The distance between the two rings and the case is equal, and the hole for installing the earrings should be centered at the end of the case foot, and the depth of the hole is appropriate so that the ring is not easy to fall off; The watch glass should be free of defects and scratches, transparent and bright; The three needles are installed correctly, and there should be correct safety clearances between the needles and the needles, the glass and the dial; The dial and hands are plated with a good finish, no marks, and the dial scale lines or luminous dots are complete; There is a gap of about 0 1 0 3mm between the handle and the case.
2. Check the sensitivity of the watch.
The sensitivity of a watch refers to the flexibility with which its balance wheel automatically swings. The way to check is as:
1) Gently shake the watch that has not been wound and has stopped moving, and observe the movement of the second hand with the help of the power of shaking: if the second hand stops moving in a short time, it means that the watch can be fully wound (that is, the clockwork is not current), and the sensitivity is high; If the second hand continues to move for a long time, it means that the watch cannot be fully wound (i.e., the clock also stores torque), the sensitivity is not high, or the watch is faulty.
2) Slowly turn the handle of the watch that has not been wound to stop moving, and observe the start of the second hand: the less the upper handle, the earlier the second hand starts, the higher the sensitivity of the watch; Otherwise, the sensitivity is low or there are other faults in the meter. However, it should be noted that due to the stiffness of the hairspring, the fast swing watch has to be a little more wound than the traditional frequency (18,000 times per hour) to swing.
A watch with high sensitivity will continue to move for a long time after a full wind.
3. Check the spacing and position of the watch hands.
A certain distance should be maintained between the watch hands and the watch glass, the dial and the three hands, otherwise they will collide with each other and affect the normal operation of the watch machine. During the examination, it can be observed by dialing the needle. The method of checking whether the position and coordination of the hour and minute hands are normal is as follows:
Move the minute and hour hands to 3 o'clock and 9 o'clock and observe whether the two hands are at right angles; Dial to 6 o'clock, whether the two needles are in a straight line; Dial to 12 o'clock, whether the two needles coincide.
Fourth, check the upper bar mechanism of the watch.
A normal watch bar should be relaxed. When you can't continue to turn the handlebar, it means that the mainspring is completely full and the upper mechanism is working normally. If there is an abnormal sound of "chirping" or the phenomenon of slipping of the top teeth when turning the shank head, it means that the upper bar mechanism is faulty.
5. Check the watch dial mechanism.
The watch should be flexible, reliable and evenly rotate the hands when dialing the hands. During the inspection, the tightness of the friction fit between the sub-wheel and the central axle should be checked. When dialing the needle, if there is no loose or tight feeling, it means that the friction force of the wheel is normal and the appropriate amount of oil is added, otherwise, the needle dialing machine is faulty.
-
<>1. Movement. First of all, it is necessary to be very familiar with the model of the movement used in the real watch and the movement logo, so that if you encounter a fake watch with a transparent caseback, you can distinguish the authenticity at a glance. Secondly, it is necessary to carefully observe the words of the movement, the engraving of the words of the genuine movement is clear and beautiful, while the fake watch is rough and unaesthetic.
Finally, it is necessary to have an in-depth understanding of the performance of the movement, such as the winding method (manual or automatic, unidirectional or bidirectional), the sound of the movement running time. The splint or oscillating thallium in the movement of genuine Tissot watches is marked with the words Tissot trademark signage; The movement is stable in the case assembly; Clean in the heart. There is no Tissot trademark on the splint or oscillating balance in the movement of a counterfeit Tissot watch, or the handwriting on the Tissot trademark plate is rough, blurred, skewed, or simply pasted with a small copper sheet; The inside of the machine is not clean, and some of the machine center has copper filings, hair strands, fingerprints, etc.
2. Look at the back cover label. To look at the factory label on the back of the watch, usually the brand logo will be on the label of the famous watch, and there is an identification of the number of watch models. Some watches also have a laser laser on the back label.
3. Look at the appearance. First of all, we must carefully observe the appearance of the watch, including the polishing of the appearance: see if the polishing technique of the watch is delicate, the polishing of famous watches is very particular, and the craftsmanship of fake watches is far from it.
Font: The font of the real watch is full, and the fake watch looks lacking in confidence. Features:
Most fake watches will work their functions, which is a breakthrough to see through fake watches. Many fake watches function as decorations (e.g. moon phases, perpetual calendars, tourbillons, etc.) but do not actually have this function. Pointer:
The hands of the original can be distinguished from the fake in terms of length, thickness, shape and material. For example, the "blued steel hands" often used in luxury watches are a rich dark blue color of the hands of real watches, which are fired by a complex process, while the blue of fake watches is brushed up. Disk:
The most commonly used dial techniques for luxury watches include enamel, guilloché, metal radial dial, shell dial, etc., and some watches also have their own unique technology, such as Rolex's computer disk, Cartier's pure gold and silver-plated engraved dial, etc. Diamond and setting process: Look at the setting process, the quality and size of the diamond.
-
Hello, the specific identification methods are as follows:1Looking at the movement, the real Tissot watch is equipped with a Swiss 2824 regular movement, even if it is relatively poor, it is a Japanese 2035 movement, while a fake watch is generally a low-end movement from Guangdong and Japan.
2.Listen to the sound, the sound when the watch is moving, it is made by the movement, the sound is crisp and clear, but those low-end movements, most of the sound is muddy and blurred.
3.Looking at the handwriting, there are some manufacturers specializing in piracy, there will be a set of assembly lines, and even the movement can be produced, but due to the lack of technology and capital investment, most of the signs engraved on it are not very clear.
3.Looking at the polishing of the appearance, the appearance of famous watches is generally very delicate and feels very good.
5.Look at the pointers on the watch, the pointers of the real watch, are generally burned through a very complicated process, while the fake watch is not so complicated, and it is generally brushed directly.
6.Looking at the function on the watch, the general fake watch does not have the technology of the real watch, the perpetual calendar, the moon phase, etc., in fact, there is no such function.
-
Please wait. 01. Look at the back cover, whether it is a Tissot watch or other brand watches, the workmanship of the back cover is very exquisite. For example, a Tissot watch has a Tissot logo on the back cover, and the branding itself is very clear and complete.
At the same time, the material used for the back cover is exactly the same as the case material, without any cutting corners. However, if it is an imitation of the back cover of the Tissot watch, the trademark handwriting is not so complete and clean. 02. Look at the dial The dial of the real Tissot watch is very precise when it is made, and the glass on the surface is also cleaned in the street, although the components of the shell are angular but there is no sense of sharpness, but there is a more advanced texture.
In particular, the number of diamonds marked on the dial is also completely consistent with the actual number of diamonds in the heart. The placed Tissot watches are not so delicate in the production of dials, and there will be some deficiencies to some extent. 03. Looking at the movement of the watch, it is the most important position.
If you want to judge whether a Tissot watch is genuine, then the inspection of the movement must be indispensable. When buying, you must carefully observe the model of the watch movement and the logo of the movement, the words of the Tissot watch movement are engraved clearly and beautifully, but if it is an imitation, there will be a sense of roughness, and the sound of the movement is also relatively clear and crisp, without any noise. 04. Looking at the price, you get what you pay for, and it is always the same truth.
Don't always think about being cheap, you may not end up being deceived. So when we choose a Tissot watch, if it is a price that is significantly lower than the market price, it is likely to be an imitation.
Questions. Check what is true or false.
The box of a Tissot watch will contain a certificate with the model number and serial number of the watch (this is unique, equivalent to a person's ID card). We can distinguish the real from the fake by this serial number.
You can also call the official ** or enter the official website to inquire.
-
Authenticating a Tissot watch requires a certain amount of professional knowledge and knowledge of the watch, so it is recommended to go to the counter for authentication.
Clause. 1. Distinguish the authenticity of Tissot watches from the appearance of the watch
**Tissot watch from the appearance of Tissot watches: the dial of the genuine watch, the back cover of the Tissot trademark and the Tissot brand handwriting are clear and complete; The number of diamonds marked on the dial is consistent with the actual number of diamonds in the core; The material of the back cover matches that used in the case; The table glass is smooth and clear; There is no sharpness in the outer edges and corners of the case assembly; The coating has no bubbles and does not fall off.
Tissot logo. Clause.
2. Distinguish the authenticity of Tissot watches from the watch movement
**Tissot watch from the Tissot watch movement: the bridge or oscillating plate in the movement of the genuine Tissot watch trademark is marked with the words Tissot trademark signage; The movement is stable in the case assembly; Clean in the heart.
Clause. 3. Distinguish the authenticity of Tissot watches from the watch inspection logo
At present, the local trademark offices have to carry out batch inspection of imported Tissot watches operated by some large shopping malls and collectives and individual stores with good reputation, and those who pass the inspection will be issued with a certificate of conformity and a laser anti-counterfeiting mark. When buying an imported watch, you should check the seller's commodity inspection certificate and whether the number on the laser anti-counterfeiting mark is within the number listed on the certificate.
Authenticating a Tissot watch requires a certain amount of professional knowledge and knowledge of the watch, so it is recommended to go to the counter for authentication.
-
How to tell if a Tissot watch is genuine.
-
Belle! What's your ** shooting? If I were to tell you to tell these **, I could only tell you! Your phone is a copycat ......
The watch can basically be judged to be a high imitation of Guangdong!!
When it comes to the identification of Tissot watches, you should pay attention to the following points.
1. Look at the Tissot watch movement and logo.
Nowadays, there are thousands of brands of watches, and the quality of the movements is also different. Among them is the Swiss Caliber 2824**, commonly known as the Yellow Movement. Japan's 2035 calibre, fake Tissot quartz watches mostly use this kind of movement.
The counterfeit mechanical movements mostly use the Guangzhou Pearl movement and the original Japanese Double Lion brand movement, and the Guangzhou Pearl movement is mostly the lowest counterfeit watch, while the mid-to-high-end movement watches mostly use the original Japanese Double Lion brand movement. When buying a Tissot watch, customers must carefully look at the movement model and movement mark of the watch, and the fake watch movement can be seen from the logo at a glance. In addition to this, it is necessary to carefully observe the success of the movement, ** the original movement is clearly written.
Finally, you also have to listen to the sound of the movement of the movement, generally the sound of the original movement is relatively clear and crisp.
2. Look at the appearance and function of Tissot watches.
In addition to the watch movement, take a closer look at the case, strap and dial and glass of the watch. **Polished appearance and fineness of the case of a Tissot watch. Look at whether the polished edges of the case are smooth and fine, fake cases are mostly rough and low-made.
The scale of a real Tissot watch is clear and full, while the scale of the hands of a fake watch is mostly blurred. In addition, you can also distinguish the authenticity of the watch from the small places such as the edges and corners of the watch, because most of the fake watch craftsmanship is very low, and the number and pattern of the original ** watch cannot be completed in the delicate places such as the inside of the watch and the dial. Finally, there is a big difference between the functions of real and fake Tissot watches, and most of the fake Tissot watches have the function of decoration, such as (such as moon phases, perpetual calendars, tourbillons, etc.) on fake Tissot watches.
The hands are also a big difference between the hands and the fakes, and the length, thickness, shape and material of the hands of the Tissot watches have strict requirements. The "blue steel hands" used in high-end Tissot watches, the hands of real watches are full of dark blue, and the hands of this kind of watch need to be made with complex craftsmanship, while the blue of fake watches can only be brushed up, because fake watches cannot do such a high level of craftsmanship.
3. Look at the watch box, instruction manual and warranty card of Tissot watch. **Original Tissot watches come with a watch box, the watch box is red, and the exterior design and packaging of this watch is very elegant. On the outside of the watch box is the serial number of the Tissot watch model.
Instead, the box contains the instruction manual and warranty card for the Tissot watch. If there is no such thing, it is mostly a fake watch product.
The above three aspects are the most common ways to distinguish the authenticity of a Tissot watch.
-
How to tell if a Tissot watch is genuine.
-
I think you can go to Luyi to buy the appraisal, this brand is quite fake, I have identified the bag and watch over there.
-
I can say for sure that your watch is a Tissot watch. **The watch on is a Tissot Couturier mechanical men's watch. The price of the domestic licensed goods counter is 6950 yuan, the maximum discount price is 6255 yuan, and the maximum preferential price of online shopping is 5699 yuan.
I carefully checked the details of the various parts of the watch and found nothing wrong. This is truly a real watch. Amazon** in the United States will not sell fake watches, and if it turns out that it is a fake watch, you will receive a huge amount of compensation, and you will really get rich.
But I seem to understand why your friend would say it's a fake.
Yes. However, since credit reporting is a reporting mechanism, you have to report this information to the agency in advance, obtain the understanding of the other party, make notes on your overdue behavior, and determine the number of months and days to return the money, and you may have the opportunity to gain the trust of the other party and not report it for the time being, during this period. >>>More
The circle is turned into a standard equation, the center of the circle and the radius r are obtained, and the distance d from the center of the circle to the straight line is obtained. Compare the magnitude of d and r to obtain three positional relationships between a straight line and a circle. >>>More
How to grow alfalfa grass and what season is suitable.
No more going out for cold noodles.
Traditional Chinese medicine ** pulmonary nodules, according to the syndrome differentiation of traditional Chinese medicine, Chinese medicine prescriptions can be selected, such as lung adjustment decoction and relieves depression and tackling tough soup, licorice and ginger soup, Maimendong soup, etc. >>>More