Does engine cleaning oil hurt the engine

Effects of excessive carbon deposition in the combustion chamber:

1. The engine combustion chamber is the worst place in the working environment of the car, which is under high temperature and high pressure for a long time. Inevitably, carbon deposits also occur here, mainly from the pyrolysis of incompletely burned fuel. The carbon particles here are hard and pot-shaped, and in severe cases, they are honeycomb and have a certain thickness;

2. The carbon deposition here will affect the intake vortex, hinder the rate of flame propagation, and lead to a decrease in power, which will lead to engine knocking (commonly known as cylinder knocking), and even excessive pressure leading to combustion chamber breakdown;

3. Slight carbon deposition does not matter much, but carbon deposition in the combustion chamber is an accumulation process from slow to fast, so daily cleaning is very important.

4. It is difficult to start the vehicle in winter, and the engine shakes after starting, and even causes the engine not to start; There will be a lack of acceleration of the vehicle; Idle shaking of hot cars; the phenomenon of increased oil consumption; Every carbon deposit inside the engine will have a bad impact on the normal operation of the engine, and in severe cases, it will cause irreversible damage to the engine piston.

The commonly used methods are: dismantling and washing, hanging bottle cleaning, and fuel additives.

1. Dismantle and wash. This method is very direct and rude, but it is generally sent to the 4S store for disassembly, the disassembly of the engine is more complicated, no matter what parts will affect its performance more or less every time it is disassembled, you need to ask a professional master to disassemble. The carbon deposits in the engine can be seen directly when dismantled and washed, and the cleaning will be relatively clean.

However, the cost will be relatively high, and it will also require technology.

2. Hanging bottle cleaning.

This method is also relatively common, the hanging bottle is to discharge the cleaning agent into the air intake, dilute and soften the carbon deposit to turn it into a slurry, and then burn it from the cylinder to discharge. Generally, the cleaning objects include the intake tract, throttle, intake valve, fuel injector, cylinder inside, etc., but the effect is not as direct and obvious as dismantling and washing.

3. Fuel additives.

One of the causes of carbon deposition is that the fuel burns insufficiently, which adheres to various parts of the engine and forms carbon deposits over time. The main function of additives is to drill into the pores of carbon deposits with the help of strong surface activity, destroy their structure, and gradually dissolve these carbon particles from the metal surface, and then discharge them through exhaust gas after burning with fuel at high temperatures. Effective fuel additives such as PNF stock solution are not corrosive, can clean the whole oil circuit, fuel tank impurities, fuel tank moisture, high-pressure oil pump, built-in gasoline filter, fuel injector, piston top, intake valve, exhaust valve, will not clog ternary, and the safety is relatively high.

Good. The cleaning oil uses the cleaning essential oil as the solvent, which has a strong cleaning effect. The cleaning oil can quickly decompose, back.

Remove all kinds of gums, stubborn dirt, carbon deposits and oxidation deposits inside the engine, ensure good lubrication, reduce frictional resistance, restore and improve the power of the car, restore the elasticity of various sealing rubber rings and rubber pads inside the engine, enhance sealing performance, form a protective film inside the engine, reduce fuel consumption and engine wear, prolong the service life of oil and engine, especially suitable for engines that are not cleaned, abuse additives or inferior engine oil.

This engine is clear.

BAI washing oil certainly has a role.

du1, we all know the oil change cycle, less dao is 5000, more than 10,000, then back in such a long time, the oxidation of the oil, the reduction of shear performance, will make the oil from the original new oil state farther and farther, and the engine will gradually adapt to the weakening oil environment, at this time, the continuous production of oil sludge, the continuous accumulation of carbon deposits, has become commonplace. When you change the oil, some of these substances will be released with the waste oil, and some of them will be attached to the engine surface and oil pan. So, in the long run, that's why the inside of the engine gets dirty.

2. The cleaning oil is added to the same amount after the waste engine oil is released, and it runs in the idle state for 20 minutes. Under normal circumstances, the cleaning oil is relatively thin, the viscosity is relatively small, the fluidity is very good, coupled with the excellent cleaning function, it will stir up the garbage accumulated in the last oil change cycle from the attachment surface through idle operation, become suspended, and then release it on the plane, and replace the oil filter to achieve the purpose of cleaning the engine.

3. From the visual point of view, the oil added is generally light yellow, and the oil released is generally light black, or even black, and these black substances are the garbage inside the engine.

Using scouring to prove that engine cleaning oil really works?

I think it's okay to do this thing with bai cleaning oil, if you believe it.

zhi use, don't dao believe the words and nothing!

Go back to our house to sell this thing, answer the method of use is, put all the oil out, and then add cleaning oil (as clean as cooking oil), idle for 15 minutes, release it (very black and very black), and then add new oil, to say that there is no effect, how to explain the black oil sludge washed out, as for how big the effect is, there is no way to verify!

There is no need to clean, you just need to maintain it according to the instructions.

Tonik engine cleaning oil is easier to use.

Does engine wash oil damage the engine? Does engine wash oil damage the engine? The engine cleaning oil generally has no damage to the engine, and the main body of the engine cleaning oil is to clean the oil sludge and carbon in the oil circuit, which plays a role in purifying the oil circuit.

Organic amine chemicals, pour point depressants, naphthenic acids, etc. The advantages of using engine cleaning oil are: 1. Engine carbon deposition cleaning can prevent the engine from producing problems that are not conducive to the use of the vehicle, such as insufficient power; 2. During the use of the vehicle, slight carbon deposition will not affect the use; 3. Moderate carbon deposition will increase fuel consumption and reduce power; 4. Heavy carbon deposition will lead to vehicle shaking, lack of fire, loud noise, weakened power and rapid increase in fuel consumption.

Engine cleaning oil does no harm to the engine. The engine lubrication system needs to be cleaned regularly, and the engine engine is easy to accumulate sludge and dirt in the vehicle engine for a long time, and the use of engine cleaning oil to clean the engine can effectively remove the oil sludge and dirt in the oil duct, which can improve the fluidity of the new engine oil, thereby prolonging the service life of the engine.

Why do you need to clean sludge dirt from your engine? Greasy dirt is an incurable disease accumulated by the engine for a long time, and carbon deposits are the same "impurities" that hinder the normal operation of the engine.

For example, it will cause the power of the car to decrease, increase the noise during driving, increase fuel consumption, etc., and in more serious cases, it will cause damage to the inside of the engine. Therefore, regular inspection, timely maintenance, and regular engine cleaning are very necessary, which can effectively extend the service life of your car.

Cleaning the engine with cleaning oil may cause the engine to burn prematurely, engine cylinders to jack up, etc. If the engine cylinders are jacked up, the engine may be scrapped. At present, the key components of engine cleaning oil on the market are low-cost mineral oil and detergent dispersant, and the proportion of detergent dispersant is still relatively high.

After cleaning the engine, the cleaning dispersant will remain in the engine and can affect the performance of the new oil, especially in the direct injection engine, which can be very serious. But is sludge in the engine harmful? Let's talk about it.

1.The sludge inside the engine will affect the heat dissipation of the engine, which will affect the high temperature of the engine oil and reduce the power of the engine. 2.

The sludge inside the engine will increase the flow resistance of the engine oil and affect the lubrication effect. 3.There is a lot of oil sludge inside the engine, which will block the oil passage, and the lubrication between the various parts of the engine is insufficient.

4.Oil sludge is insoluble in the oil, the replaced oil cannot be discharged, and at the same time affects the quality of the new oil. In summary, sludge inside the engine is very important for the car, so it is important to decarburize the engine to prevent the above from happening.

There are two ways to remove carbon deposits from your engine:1Traditional operations.

This method is time-consuming, laborious and costly, and the cleaning effect is not thorough, which is harmful to the engine. 2.Hydrogen and oxygen decarbonization.

This method uses hydrogen and oxygen produced by water splitting, and does not need to disassemble the engine, which can remove carbon deposits from the inside of the engine, which is very time-saving and cost-saving. Friends, today we have introduced a lot of knowledge about cars. Keep in mind that cleaning your engine with cleaning oil can have serious consequences, and it is important to choose the right decarburization method.