What is the reason why the garment steamer will automatically stop after working for a while, and th

It is recommended to check the steam pipe first to see if it is folded, and then to see whether the water level of the water tank is normal. By the way, if you are not an all-in-one ironer, if not, you must first check whether the steam switch is turned on, or whether it is adjusted to dry ironing mode, and if the power supply is normal, you should also check that one place is heated.

body, is there too much scale inside, the more this scale, the more it affects the amount of steam, and finally the possibility of direct steam accounts for 50%, you can use white vinegar and water 1 1 after mixing, pour in from the water inlet, shake repeatedly, open the descaling valve at the bottom of the machine, and let it go.

Rinse with water a few more times. There is also a garment steamer that is recommended to use the automatic cleaning function, like the automatic cleaning function I use, so basically this kind of problem will not occur, usually the garment steamer at home remember to clean up the unused water in time, and clean the water tank regularly, of course, if you choose the garment steamer with its own cleaning, it is the best.

First check whether the pipe is knotted, and then see if the water tank is out of water, if everything is normal, check whether it is adjusted to dry ironing mode.

If it is all normal, continue to inspect the heating element to see if there is any limescale inside, if there is too much limescale, it will clog the water outlet. You can mix white vinegar with water one-to-one, shake it and let it stand for ten minutes, repeat it several times, and the scale can be removed.

Remember to clean up the unused water in time and clean the water tank regularly.

Not enough water: When the garment steamer is running, it will generate some heat, so that the water in the tank can be vaporized, and water vapor will be sprayed out of the nozzle. If the water in the tank is not enough, it will not be able to produce enough steam below the warning line, so it will cause the garment steamer to have steam and no steam for a while.

There is scale: after the garment steamer has been used for a long time, some scale will be produced inside, which will easily block the steam pipe and nozzle, and the steam generated can not be sprayed out well, and it will be easy to be intermittent, which will lead to the steam of the garment steamer for a while, which is also a very common reason.

Precautions for the use of garment steamer.

When ironing trousers, garment steamers use ordinary hangers to hang on them for ironing, and it is best to wear anti-scald gloves.

When ironing the hem of the garment, grasp the sides of the garment and press it tightly, alerting to the hot steam from the steam nozzle. (A more convenient way is to iron with a plywood.) I'm not afraid of hot hands and it's good to iron my clothes).

When ironing the collar, it is generally necessary to turn the collar over and iron it from the back, which is relatively easy, and when it is ironed to the sleeves of the clothes, the sleeves should be straightened a little harder, and the steam nozzle should be pressed on the sleeves for a longer time, and the iron should be pressed back and forth.

The above content refers to Encyclopedia - Garment Steamer.

People's Daily Online-Garment irons are available on demand.

This should be the reason for the instability of the outsteam. You can first check whether the power supply is normal, and then check whether the dry ironing mode is modulated, if it is set to the dry ironing mode, then it will only steam and will not work normally. Finally, check the heating element, if there is scale hidden in the heating element, it will affect the work of the garment steamer, and the more scale there is, the greater the amount of steam.

It is recommended that you clean the dirt of the garment steamer in time, and adjust the water level in time to avoid the unstable operation of the garment steamer due to the inappropriate water level and uncleanness. The air outlet of the garment steamer oxidizes in the place where the acidity or alkaline water acidity and alkalinity are relatively strong, and the oxidation causes the overall performance of the garment steamer to deteriorate because the garment steamer does not adopt advanced anti-corrosion coating technology. Remaining,

Dear Kiss I'm glad to answer for you, my answer is as follows: the garment steamer will stop heating for a while for the following reasons: 1. When the water is not enough for the garment steamer to run, it will produce some heat, so that the water in the tank can be vaporized, and the water vapor will be sprayed out from the nozzle.

If the water in the tank is not enough and is below the warning line, it will not be able to produce enough steam, so it will cause the garment steamer to have steam and no steam for a while. 2. If the scale garment steamer has been used for a long time, some scale will be produced in it, which will easily block the steam pipe and nozzle, and the steam generated will not be sprayed out well, and it will be easy to be intermittent, which will lead to the steam of the garment steamer for a while, which is also a very common reason. 3. The water vapor generated by the garment steamer will be transported from the steam pipe to the nozzle and then sprayed out if the pipe is bent or squeezed, which will affect the delivery of steam, and the steam emitted by the nozzle will not be continuous, which will cause the garment steamer to have steam and no steam for a while.

4. If the steam of the garment steamer is unstable, there will be no for a while, this situation may indicate that the garment steamer itself has a fault, resulting in the garment steamer can not work normally, the steam generated is not much and the spray effect is poor, at this time, it is necessary to suspend the use and repair it in time.

My garment steamer starts burning and stops immediately, and after a while, it burns automatically, and it only burns once and stops, and what happens over and over again?

My garment steamer starts burning and stops immediately, and after a while, it burns automatically, and it only burns once and stops, and what happens over and over again? Hello dear, if the interval is not very long, it is the overheating protection function of the garment steamer, because if the garment steamer continues to heat, it will damage its inner tank and consume the life of the garment steamer, Huaguang. The art of steam.