What is the best cable for a set of Tianlong 980HIFI audio?

Regarding the Tianlong 980HIFI audio you asked, the use effect of pure copper high-fidelity cable is the most ideal, and you can also directly purchase supporting products through their original customer service.

The audio cable between the audio source and the amplifier is generally used with the RCA lotus connector, of course, if your audio source and amplifier support can also use XLR to balance the input with better effect; Speaker wires are used between the amplifier and the speaker, also known as speaker cables; You should also pay attention to buying lines, many of them are copycats on the market.

The cable of the lotus connector is generally used between the audio source and the power amplifier.

Speaker cables are generally used between the amplifier and the speaker.

There are many wires of various brands.

Some ** are also very high.

However, there is a certain proportion between the general and other equipment.

If you want specific parameters, you need you to understand the parameters of each device in your system, I used to pretend to be the same set as you said, and then I didn't understand anything like a little white, and then I also listened to the introduction of pen friends, on Tmall JSJ Jinshanjiao, asked the customer service staff, Very professional I gave them the parameters directly to help me match.

Enthusiasts generally use sterling silver wire, depending on how much you like it.

Silver. It can only be said that it is relatively good! It's good to apply. For popularity, consider Albemarle.

Tianlong amplifier and JBL speaker are a perfect match, JBL speaker in the treble is transparent, the resolution is very good, the bass is soft, elastic, just suitable for Tianlong amplifier.

There is no fixed mode for the investment ratio, generally speaking, 10,000 to 20,000 wires are fine.

The key depends on how sensitive your device is to the current. For example, if your speaker is highly sensitive, then it is very sensitive to cables, and if it is designed with low sensitivity, then the cables here can be reduced a little. The same goes for your amplifiers.

The cable does not give you a huge boost in nature, its main purpose is to adjust the various parts of the whole system to achieve the most coordination.

Many people think that wire is useless, mainly because they don't understand metal structure and crystallography. Metal atoms do not move, mainly free electrons move and conduct electricity, and free electrons are bound in the lattice of metal crystals, but the lattice is not regular, so the crystal plane and crystal direction of each lattice in the general metal conductor are different, which means that in the process of free electrons moving from high potential to low potential Liugong, most of the electrons move in a direction that is not uniform enough, but collide with each other in the metal crystal and are pushed to move with the electric potential, which is the loss (it can be imagined that the electron motion in the ideal state is a straight line, In fact, it is a constantly colliding squiggly line). That is why, for the same specification of wire, the purer the metal, the higher the conductivity of the wire, the purer the metal, and the more straight the electron movement.

However, there are still a large number of crystal defects in metal crystals, that is, there will always be some atoms that cannot form a crystal when the atoms are arranged, which is called crystal defects, which will also affect the transfer of free electrons. Therefore, there is freezing technology, through freezing to more than minus 100 degrees, the principle of thermal expansion and cold contraction shortens the distance between the atoms in the crystal, and then uses low-voltage and high-current (often a low-voltage and high-current of more than ten volts, thousands of amperes) to impact the free electrons, and change the structure of the defective crystal to become a positive crystal. Therefore, the high-grade wires are directional, and they will mark the direction of the current, and the wiring will have no effect if it is reversed.

Therefore, the cost of high-grade wires is high, and the purpose is only to make the internal flow of its own electrons smoother. Add that your system is very sensitive to current, high-grade cables are a necessity for you, and if the system is not sensitive to current, then a normal power cord will suffice.

How much is the budget? 10,000 yuan is basically fine.

There is no set pattern for this.

Mainly speaker's**.

In my opinion,The speaker is the most important,Mainly choose high-fidelity subwoofer,This** is more expensive,At least more than 4,000。

The power amplifier should be Class A, more than 100 watts. It also takes more than 3,000.

The rest can be bought on CD.

One depends on how long the distance you connect, and the other depends on how much budget you have.

If the distance is very short and the budget is relatively sufficient, then it is enough to choose some good quality coaxial cables. Generally speaking, I do not recommend the coaxial line below 100 yuan per meter, ** at about 100 yuan per meter, such as American monsters, line saints, European Yabao, Japanese Furukawa or domestic Zhang Yang are good choices. This price point is mainly some pure copper wire or silver-plated wire.

Of course, if your equipment is good enough and your budget is more abundant, you can also choose some more advanced monocrystalline copper wire or silver wire.

If your budget is less than 100 yuan per meter, or the distance you need to connect is relatively long, then it is recommended that you use some reliable fiber optic cables. Of course, there is no fiber optic port. If your CD player is high-end enough to have a balanced output, then the balanced cable is the best choice, but it costs more than the coaxial cable.

Unless it is absolutely necessary, try not to use RAC to connect.

If the nouveau riche is on the gold wire, if the waist is bulging, the silver wire will be used, the common people will use oxygen-free copper wire or white copper wire, and the poor will use the lamp wire.

In principle, I agree with Pingzuyu Jun's statement, but I think that it is easier to give full play to the potential of the equipment with other equipment centered on the power amplifier, and it is difficult to say that a good HiFi audio is important and that link is not important. If I have to say, my opinion is that the environment and power supply are the most important, and they are also the part that has the greatest impact on the sound effect, for the following reasons; For example, if you put a set of 1 million speakers in a square space or an environment with a height of less than 2 meters or more than 4 meters, can it sound good? Therefore, there is such a saying in the audio industry, which is called three points of equipment and seven points of environment.

The same set of 1 million speakers, if the power supply is not handled well, such as the voltage is lower than 200V or higher than 230V, and the power cord diameter is lower than the flat, can it have a good sound? Power is like the food of the speaker, if you don't feed it, don't expect it to do a good job.

Speakers are equivalent to people's throats,Power amplifier is a human lung,Born with a bad voice,Singing what song is not good,Generally speaking,Speakers should be used as the center to select other equipment,The principle of collocation is to maximize the potential of speakers,The actual collocation we have to have reservations,It is difficult to quantify,A pair of speakers of 30,000 yuan,We can use 50,000 yuan of supporting equipment to make the speaker play about 80% of the potential,Use 100,000 yuan to play 90% of the potential,Use 200,000 yuan to play 95% of the potential, When a system in addition to the speaker we are difficult to improve the sound by changing the peripherals, it can be said that the system is relatively balanced, and this balance is only based on the subjective sense of hearing, everyone feels different, in fact, in a set of HIFI system, equipment suspension, listening environment and power supply system are also very important. Hifi played to the end, and many people were playing with electricity and playing with suspension.

Personally, I think that speaker: amplifier: sound source = 50:30:20

A barrel, which stick determines the height of the water level?

What equipment is included in an entry-level HiFi speaker? What is the approximate budget and what is the right cost? Today, let's listen to the insights of Mr. Liu of Baolichang for many years of audio equipment configuration, I hope to help you choose a set of HIFI audio that suits you, feel the best, and taste life!

To play HIFI, you must first have a little basic knowledge, and it is best to go to the audio store to listen carefully and taste it slowly. Everyone's feelings about ** are different. What others recommend to you may not be right for you.

In terms of your budget, and in terms of your requirements. It should be that Tianlong power amplifier + B&W bookshelf speaker will be more suitable for you. This is also a classic configuration for beginner enthusiasts.

Listen to the S3 5R, about 7,000, with a domestic gall machine or a class A power amplifier, it should meet your requirements.

Buy Huiwei ** DIY version 2200 yuan, and then buy the power amplifier TP60 = 980 ...A total of 3,000 yuan. The sound source is integrated with a computer.

The room is less than 10 square meters, which is very suitable for your listening environment. No more is of any use.

I think you can go on the pure flute S701 box, which is of high quality to the box.

Come to our company and take a look, UE is excellent. There's always something you like