What is the reason why the refrigerator does not refrigerate after moving

1. When the refrigerator is not refrigerated, you should first check whether the connection of the power supply is normal, check whether the light in the refrigerator is normal, and you can also use an electric pen for further testing.

2. If the power connection is normal, you can monitor whether the compressor is working normally. The compressor emits a small motor vibration sound during normal operation. When the high-pressure output buffer pipe in the compressor is broken, or the screw fixing the tube is loose, the high-pressure pipe is not exhausted, and the low-pressure pipe is not suctioned, so the compressor is running, but it is not refrigerated.

Solution: Open the casing, replace the buffer tube, or tighten the screws.

3. If the compressor can run normally, you can check whether the refrigerant in the refrigeration system is used up The specific judgment method: you can let the refrigerator run for 3-5 minutes, cut off the power supply, and listen to whether there is a sound of water flowing. If there is no sound.

This means that the refrigerant in the refrigeration system has been used up or is leaking. It could also be that the compressor is incapacitated.

Solution: If there is a system leakage, by finding the leakage part of the system, after welding repair, pressure test, and evacuation are qualified, add refrigerant to a certain amount, usually according to the evaporator is full of frost or the refrigerator reaches the rated temperature.

Fourth, the blockage of the capillary tube of the refrigerator will also cause the refrigerator to not refrigerate. When the capillary tube in the refrigerator is blocked, the refrigerant cannot enter the evaporator to absorb heat and exert its effect, resulting in the temperature of the refrigerator remaining high. Depending on the type of refrigerator, the refrigeration situation will also vary.

If the refrigerator belongs to the intercooling type and there is no ice making failure, you can check whether the fan of the refrigerator is working normally: open the refrigerator refrigerator door, press and hold the button at the edge of the box mouth with your hand (this button controls the indoor lighting and stops the fan when the door is opened), check whether the fan is working, the fan does not work will also cause the refrigerator to not refrigerate.

Solution: The capillary or dryer is clogged, and the outlet is hot, so remove it to remove it! In addition, there are generally two types of household refrigerators: direct cooling and intercooling, which refers to the heat exchange between the evaporator (cooling pipe) and the freezing and refrigeration rooms to achieve the purpose of cooling; Intercooling means that the evaporator (cooling pipe) is separated from the freezing and refrigeration room, and the cold air is blown into the freezing and refrigeration room by a fan to achieve the purpose of cooling.

When moving the refrigerator, the inclination should not exceed 45 degrees, and the compressor will easily jam and cannot be compressed.

Then look at the heat dissipation copper pipe at the back of the refrigerator to see if there is any damage, if it hurts, it is fluorine leakage, and it has to be filled with fluorine after repairing and welding.

Hello! When handling the refrigerator, pay attention not to tilt more than 45 degrees to avoid damage to the compressor. When your refrigerator moves, it may hurt the pipeline and cause cold leakage, or there may be a compressor problem, it is recommended to contact customer service to check and deal with it.

Freon is inside the refrigerator refrigeration line.

1. When the refrigerator is moved, the power is turned on, but the non-refrigeration is generally caused by the compressor spring falling off, or the compressor refrigerant is refluxed to the refrigeration capillary and blocked. If the compressor spring falls off, it can be reinstalled, and the problem of refrigerant backflow requires the refrigerator to be placed in the right place and left for 2-3 hours before being powered on.

2. When the refrigerator is being transported, it is necessary to prevent bumps and violent vibrations, and to prevent rain and water immersion. The bottom of the refrigerator should be lifted, and the refrigerator door handle, top plate frame, condenser or adjusting screws should not be grasped, and it should also be lifted gently to prevent the box or other parts from being damaged.

2. What should I do if the refrigerator fresh-keeping room is not refrigerated?

1. Power supply problems.

The refrigerator fresh-keeping room is not refrigerated, sometimes it is not a problem of use, nor is it a problem of refrigerator quality, it may be a power supply problem, and the power supply check whether the power connection is normal. Open the door and observe whether the lights in the box are lit, or use an electric pen to test whether the socket has electricity.

2. Compressor problem.

If the power connection is normal, you can listen to whether the compressor is working. If you feel the vibration of the compressor by hand, you should pay attention not to burn, because the compressor temperature is 40-50 in winter and 80-90 in summer.

3. Refrigerant leakage.

If the compressor can work, judge whether there is refrigerant in the refrigeration system. Let the refrigerator run for a few minutes before unplugging and listen carefully for the sound of liquid running inside the copper tube. If not, it means that the refrigerant in the system has leaked, or the compressor has lost its capacity.

4. Fan problem.

If the refrigerator is intercooled, check if the fan is working. Open the door of the freezer compartment and press and hold the button at the edge of the box mouth with your hand (this button controls the indoor lighting and stops the fan from working when the door is opened) to see if the fan is working, as the fan does not work will cause the refrigerator to not refrigerate. In addition, too much food can also affect the refrigeration effect.

Moving is a very troublesome thing, the furniture is bumped and bumped, and it will break if you are not careful, and it is even worse if the appliance is broken. Whether the refrigerator is cold or not is a common problem after the refrigerator is moved in a moving house, so what should be done?

1. First of all, we need to make it clear that the position of the compressor is generally at the bottom of the refrigerator. When the refrigerator is transported, if the cabinet is tilted more than 45 degrees, the refrigerant in the compressor will flow back to the upper refrigeration pipe, resulting in the circulation in the refrigeration pipe being blocked, and the refrigerator will not be refrigerated.

Therefore, after the refrigerator is moved, it should be left for 2-4 hours, and then the power is turned on so that the lubricating oil or refrigerant can settle for a while and flow back to its respective position.

2. If the refrigerator is powered on or not refrigerated after 2-4 hours, then check whether there is a problem with the power supply and check whether the power connection is normal. Open the door of the refrigerator and observe that the light in the refrigerator is on, or use an electric pen to test that the socket is powered on.

3. If the power connection is normal, you can listen to whether the compressor is working normally. When the compressor is working normally, it will emit a slight vibration motor noise. If you feel the vibration of the compressor with your hands, be careful not to burn it, because the temperature of the compressor is 40-50 in winter and 80-90 in summer.

If the compressor is damaged, you need to contact the maintenance personnel to come to the door for maintenance.

Refrigerator repair services.

Nearby door-to-door refrigerator repairs.

One-step home home repairs.

Smart applets.

Go to place an order. 4. If the compressor can work normally, then it is necessary to see if there is refrigerant in the refrigeration system. Let the refrigerator run for a few minutes, then unplug it and listen carefully to the sound of the liquid flowing inside the copper tube.

If not, it means that the refrigerant in the system has leaked or the compressor has lost its ability to work. Contact the maintenance personnel to add the refrigerant at the door.

1. The compressor is damaged 2, the refrigeration oil in the compressor flows into the refrigeration pipeline 3, the compressor is uncoiled 4, do not rush to start the machine after handling, try it after more than 24 hours, and contact it for maintenance if it does not work.

Check whether the refrigerator compressor can be turned on normally, if not, check whether there is a problem with the starting circuit and thermal protection relay, and if the compressor is running without problems, then check whether there is a leak in the system refrigerant.

1. It may be that the internal temperature of the refrigerator system is too high, and the refrigerant.

missing, that is, freon.

It's leaking, so there's no way to refrigerate. 2. It may be that frost covers the evaporator.

When the frost of the evaporator cannot be melted away, and the air duct mouth is blocked, the refrigerator cannot be refrigerated normally. 3. It may be that the refrigerator has been used for too long, and even if it is full, it will not work, because the evaporator or pipe has a very large leakage point. 4. It may be that the compressor cannot start and run normally because the pressure is too low, resulting in no refrigeration.

Suggested treatment: 1. To re-add new freon, and be sure to vacuum, as well as re-weld the pipe, this ordinary person still can't do, it's best to find a maintenance person. 2. If it is found that it is the cause of the evaporator, the heating element or timer must be burned out, and the defrosting system needs to be checked and replaced with a new heating element.

3. It is difficult to repair the leakage point dust, and you need to find a master for maintenance, but even if it is repaired, it cannot be guaranteed how long it will be used, and it is recommended to replace it with a new machine, after all, no matter what electrical appliances, they all have a service life. 4. If the compressor is a problem, you must first check whether the power supply is normally connected, send Mingchun or check whether your own voltage is normal, and the insufficient power supply will also make the compressor unable to run well.

1. When moving, due to the wrong method of moving, refrigerant.

The compressor springs will come loose and the pipes of the compressor in the refrigeration system will be blocked. 2. When carrying the refrigerator, the refrigerator has been violently shaken or bumped, or soaked in rainwater, and other parts of the refrigerator have been damaged. 3. The socket of the refrigerator is not properly connected when the power is turned on, or the lighting of the refrigerator is damaged.

Suggested treatment: 1. Do not turn on the power supply between the stools in the first time after moving, and reinstall the spring of the compressor after the refrigerator should be correctly placed in the refrigerator, if it is because of the blockage of the refrigerant compressor that can not operate normally, you need to repair the compressor, you need to contact the maintenance master, and the master must wait for three hours before powering on after the door-to-door inspection and maintenance. 2. When carrying the refrigerator, it should be lifted gently, and it is best to lift the bottom of the refrigerator first and then move.

In order not to damage the parts of the refrigerator, it is necessary to place the handle of the refrigerator and other parts in a good position. 3. You can use an electric pen first.

Power on and test whether the power supply of the refrigerator is connected normally. Sometimes it is not necessarily the problem inside the refrigerator, it may be that the voltage in the home is too small to support the operation of the refrigerator.

1. Unplug the power supply in time to keep the refrigerator standing upright, which generally takes more than three hours to stabilize the refrigerant and refrigerant in the refrigerator. 2. Check the refrigerator to see if there is any falling power cord or other bumps. 3. Check the compressor of the refrigerator to see if the spring has fallen, and if it falls, it needs to be installed in time.

4. You can ask after-sales or professional maintenance personnel to come to the door for testing.

Reasons for this:

1. The refrigerator is not kept upright during transportation and is placed horizontally for a long time, in this case, the refrigerant in the refrigerator will crack and reflux, and there may also be refrigerant leakage, resulting in the inability to maintain the refrigeration state.

2. The spring in the refrigerator compressor fell off during the handling, which is generally caused by the fact that the refrigerator was not handled gently during handling, and the action range was relatively large.

3. When handling the refrigerator, the high-pressure output buffer pipe of the compressor is broken due to external impact or other factors. Or the screws fixing the buffer pipe are loose, causing the compressor to fail and affect the refrigeration effect.

4. The refrigerator may have a power supply line that falls, resulting in the inability to power on. It is also possible that the circuit is short-circuited due to moisture, resulting in the refrigerator cooling effect is not good.