Ask for advice on how to turn on the optical audio output input and set it up

1.If you have a VGA and HDMI port, you can use them to connect to your TV.

The interface is not capable of transmitting audio signals.

3.It is recommended that you can use the HDMI interface,Use a data cable to connect this excuse to the TVHDMI interface。

5.Transmission of sound: Right-click the speaker icon in the taskbar--- go to Devices--- select the SPDIF interface--- tap Set Defaults --- restart your laptop.

Basic steps: Settings - System Settings - Sound - Output - TV Speakers External Speaker Headphones.

Step 1: Find "Settings" on the "Apps" desktop or press the [Settings] button on the remote control and select "System Settings";

Step 2: Select the "Sound" option;

Step 3: Select the "Output" option;

Step 4: Select the speaker mode according to your actual needs;

1) TV speaker: the TV itself spontaneously sounds;

2) External audio (i.e., optical fiber interface): connect the power amplifier and audio sound, and select the decoding equipment;

3) Headphones (i.e., headphones coaxial two-in-one): connect power amplifier and audio sound;

Note: External amplifiers and speakers support decoding, and you can turn on "source code output"; If it is not supported, it will be turned off (it will be turned off by default), otherwise there may be no sound;

If there is an optical audio input interface on the active speaker, you can connect it directly.

However, if you don't have an optical audio input interface, then you need to configure a separate optical to analog device.

Because optical fiber is a digital output interface, most active speakers need analog sound source signal input, so the converted analog level signal can only be used normally when it enters the active speaker.

Basic steps: Settings - System Settings - Sound - Output - TV Speakers.

External audio headphones.

Step 1: Find "Settings" on the "Apps" desktop or press the [Settings] button on the remote control and select "System Settings";

Step 2: Select the "Sound" option;

Step 3: Select the "Output" option;

Step 4: Select the speaker mode according to your actual needs;

1) TV speaker: the TV itself spontaneously sounds;

2), external audio (i.e., optical fiber interface.

Connect the amplifier and the speaker to generate sound, and select the decoding device;

3) Headphones (i.e., headphones coaxial two-in-one): connect power amplifier and audio sound;

Note: External amplifiers and speakers support decoding, and you can turn on "source code output"; If it is not supported, it will be turned off (it will be turned off by default), otherwise there may be no sound;

1. Prepare a coaxial cable or an optical fiber cable. Connect the coaxial cable (or optical cable) to the corresponding interface of the TV and the power amplifier.

2. Set up the power amplifier equipment and adjust it to the corresponding mode, the name and operation method of each power amplifier equipment are different, please refer to the power amplifier manual for debugging.

If the power amplifier at home does not have coaxial and optical interfaces, you can connect one end to the X60 headphone port (audio output) through a male pair of 2RCA audio cable (as shown in the figure), and the other two ends to the L (white) and R (red) ports of the audio input of the power amplifier, and adjust the power amplifier to the corresponding input channel.

If there is an optical input port on the power amplifier, plug it in. However, the optical fiber is good for watching film and television images, and the sound channel of watching movies is also very good, and it is better to listen to ** or coaxial.

The optical fiber input interface on the power amplifier is to be used with the first fiber output equipment, when using the optical fiber function, as long as the optical fiber output interface is connected to the optical fiber input interface on the power amplifier with a fiber optic line, do not connect another signal line.

The power amplifier is referred to as power amplifier, commonly known as"Amplifiers"It is the most basic piece of equipment in the sound system, and its task is to amplify the weak electrical signal from the signal source (or from the mixer in the audio system) to drive the speaker to produce sound.

There is an optical output behind the xboxone, and the amplifier can be connected as long as it has this interface.

Your TV must have an RCA audio output connector or headphone output. If you're using a headphone jack, you'll need to purchase a Micro to RCA adapter cable.

The Xbox One Stereo Headset and several other gaming headsets use a single audio cable for chat and gaming. These headphones plug directly into the stereo headphone adapter.

Other gaming headsets use two audio cables. Usually, a cable has a green jack. The jack is used for game audio. The other cable has a pink jack.

The jack is used for chat audio on the PC. These headphones may include an adapter that combines both. However, not all of these cables use the CTIA headset standard.

This may affect performance and quality. For more information, see the section below for audio jack standards.

Basic steps: Settings - System Settings - Sound - Output - TV Speaker Mu Grinding External Audio Headphones.

Step 1: Find "Settings" on the "Apps" desktop or press the [Settings] button on the remote control and select "System Settings";

Step 2: Select the "Sound" option; Xundan.

Step 3: Select the "Output" option;

Step 4: Select the speaker mode according to your actual needs;

1) TV speaker: the TV itself spontaneously sounds;

2) External audio (i.e., optical fiber interface): connect the power amplifier and audio sound, and select the decoding equipment;

3) Headphones (i.e., coaxial two-in-one headphones): connect power amplifier and audio sound;

Note: External amplifiers and speakers support decoding, and you can turn on "source code output"; If it is not supported, it will be turned off (it will be turned off by default), otherwise there may be no sound;