What to do if your OnePlus phone automatically restarts, what to do if your OnePlus phone keeps turn

Generally, there are several reasons for the automatic restart of the mobile phone, which can be self-checked.

1) Check whether there is a virus on your phone.

If the phone suddenly and frequently restarts, it is likely that it is a virus. You can use the mobile phone security guard to scan and disinfect the mobile phone first, and clean it up.

2) Uninstall some unnecessary software.

If there are too many mobile phone installers and too many software running at the same time, it is easy to fail to run and restart.

3) Software conflict issues.

If you think about whether you have installed or upgraded any software recently, it is often these software conflicts that cause the system to restart automatically, so you only need to uninstall the software that caused the conflict.

4) Factory reset.

If you can't be sure what software or plug-ins are causing your phone to restart frequently, you can choose to factory reset your phone and save the more important things on your phone before doing so.

5) SIM card.

There is a problem. In addition to the internal software problems of the phone, the hardware problems of the mobile phone can also cause the phone to restart, and the SIM card error is a common hardware problem. Change a SIM card to the phone and see if there is a reboot to determine whether it is a SIM card problem.

6) Phone battery contact issues.

Poor contact of the mobile phone battery will also cause the mobile phone to automatically restart, and you can take it to the mobile phone repair office for consultation and help.

If you are using an OPPO OnePlus phone and the phone restarts repeatedly during use, you can try the following methods to troubleshoot:

1. Check the external third-party equipment.

It is recommended to remove the SD card or disconnect from third-party devices (such as cameras, drones, etc.);

2. Check the third-party application.

Check whether there is an abnormality after using some specific third-party apps recently; If so, it is recommended to uninstall the app first;

3. Check the mobile phone system.

Storage space sufficiency standard: more than 10% of the total storage capacity, such as 128G mobile phones, and the remaining 13G or more is sufficient memory space;

Sufficient standard of operable memory: the runnable memory is not less than 1G.

Fourth, check the physical buttons.

Detect the function of the button, determine whether the button is liquid, short circuit, stuck, etc., if there is an abnormality, go to the OPPO official service center to replace or clean the button.

If the above methods cannot solve your problem, it is recommended that you back up your mobile phone information, bring your mobile phone and purchase voucher to the OPPO official service center, and a professional engineer will test and process.

OnePlus phone is stuck on the boot interface, you can try the following methods to troubleshoot:

1.Whether the mobile phone has hardware failure caused by external forces, such as being dropped, pressed, or flooded. If so, it is recommended that you apply for after-sales;

2.For OnePlus 6 and above models, press and hold the power button and volume up button for more than 15 seconds to try to restart the phone, and for OnePlus 6 and below models, press and hold the power button for 8 seconds to try to restart the phone.

3.Whether the phone is rooted, if so, it is recommended to flash back to the official latest version of the system;

4.If the boot interface is stuck with the boot animation, it is recommended to back up the data and restore it to factory settings, (this operation will erase all data, please check whether the important data is backed up through the cloud or other means);

5.If the boot interface is stuck in the 1+ logo, confirm whether there is an interface that displays "your device is corrupt", if so, it is recommended to flash back to the official system;

If the problem cannot be solved, it is recommended that you go to the offline service center for repair.

If it keeps turning on the screen, it means that the system of this mobile phone has crashed, and you need to find a special repairman to flash the phone for you.

First of all, can I press the power button and volume button on my phone? If the power button and volume button cannot be pressed or there has been water (liquid ingress) recently, it is recommended to bring the purchase invoice, warranty card and mobile phone to the service center for testing.

If the buttons are normal and the phone has not been flooded, it is recommended that you charge the phone for 15 minutes and then try to force restart the phone to see if it can be restored.

OnePlus 6T and above models: Press and hold the power button and volume plus button for 10 15 seconds and release immediately after turning off the screen to force the power off, if you continue to press and hold until the phone vibrates and then releases, the phone will force restart.

OnePlus 6 and below: Press and hold the power button for 7 seconds and then release it immediately to force it to shut down, if you continue to press and hold until the phone vibrates and then releases, the phone will force restart.

The principle of mobile phones and computers is the same, if computers, mobile phones and other electronic products are used for a long time, occasionally there will be software errors that are not compatible with the mobile phone system, resulting in the phenomenon of system crash and stuck.

3, it is recommended to try to press the volume down button and power button at the same time for 5 seconds left and right to enter the recorvery mode, select Chinese Simplified, brother messily clear the data to see if the problem can be solved, but this operation will cause all the data in your mobile phone system memory to be lost, if it is still not recoverable, it is recommended to bring the purchase invoice, warranty card and mobile phone to the service center, to the service center for testing.

4. You can first turn off the mobile phone, enter the fastboot mode, you can "select up and down" through the volume plus or minus buttons, select start, click the power button to "OK", and then see if it can be turned on normally.

OnePlus 5T and previous models: Turn off the phone, press and hold the power button + volume plus button for 8 10 seconds at the same time, enter fastboot mode, you can "select up and down" through the volume plus or minus buttons, select start, and click the power button to "OK";

OnePlus 5T models after that: Turn off the phone, press and hold the power button + volume plus or minus button for 8 10 seconds at the same time, enter fastboot mode, you can "select up and down" through the volume plus or minus buttons, select start, and click the power button to "OK";

If the phone cannot be turned off by pressing and holding the power button, please refer to the steps to force it to shut down.

If the phone restarts abnormally, you can try the following methods to deal with it:

1. If there is an abnormal restart during standbyPlease check whether the mobile phone has been set to automatically shut down, if so, enter Settings - Other Advanced Settings - Timer Switch with Wang, turn off the timer to shut down.

and then observe whether there will be a restart;

You can go to Settings - Apps.

4. Restore factory settingsIf the problem persists, you can back up the data.

In [Settings] - [Other Settings] - [Restore Phone], clear the data or re-flash the system to try to talk about Nazai.

Play unit] OnePlus's universal toolbox of all models is shocking, and the whole network is the first (preface: Recently, I received feedback from the former Weisun OnePlus6, OnePlus6When brushing into TWRP, restarting caused the mobile phone Huilian infinite loop mountain to return to TWRP or boot, and the breathing light turned white and could not be turned on, so I won't say much about the rest, come down and open it.The official forum of the OnePlus mobile phone community.

OnePlus and 晙6手机frequently automatic restart,This situation is caused by the mobile phone system,In the shutdown state,Call Sun Feng at the same time to press and hold the volume button plus and the power button for more than ten seconds,You can enter factory mode,Restore factory settings in factory mode。

If the phone restarts abnormally, you can try the following methods to deal with it:

1. If there is an abnormal restart during standby, please check whether the mobile phone has been set to automatically shut down, if there is a setting, enter Settings - Other Advanced Settings - Timing Shutdown, and turn off the Scheduled Shutdown.

4. If the problem still exists, you can back up the data.

In the settings - restore the material Qiaoyan plant settings.

to clear the data or reflash the system attempt.

If the problem still exists after trying the above methods, it is recommended that you apply for the sale of the cover after the cover, and the network engineer will test and deal with it for you.