-
Anonymous users2024-02-07With the powerful solid and surface modeling capabilities of Pro E, the models generated in Pro E were imported into ANSYS without damage using CAD CAE integration technology for accurate modeling. Usually people import the geometry created in Pro E into ANSYS through IGES files, and the details of the structure are lost during the conversion process. In this article, ANSYS is integrated directly into Pro E using a seamless interface approach as follows:
a.Set up the interface between ANSYS and Pro E. Select "Programs" >Utilities> ANS Admin, open the Ansys Manager, click "OK" OK, and select the connection to Pro E in the configuration options dialog box, as shown in Figure 1.
Once confirmed, set the ANSYS product to "ANSYS Mechanical LS-DYNA" and the graphics display device to "3D" in the dialog box that opens, as shown in Figure 2. Finally, enter the installation path of Pro E in the local computer in the Pro E installation information dialog box, and click "OK" to complete the interface settings between ANSYS and Pro E, as shown in Figure 3. Figure 1
Setting up the interface with Pro Engineer Figure 2Select the ANSYS Analysis Module and Determine the Graphical Display Device Figure 3Determine the installation path of Pro Engineer B
Open Pro E, and there are two more options in the menu manager, "Ans Config" and "AnsysGeom", which indicates that Ansys has been integrated into Pro E. c.After completing the modeling in the Pro E, click "AnsysGeom" directly, the system will automatically open Ansys, import the current model into Ansys, click the File>Import> Pro E in the Ansys menu bar, and then select the geometry built in the Pro E dialog box that pops up.
Because this approach integrates ANSYS directly into Pro E, the entire model conversion process can be carried out without separating the Pro E and ANSYS software, resulting in a seamless connection and true CAD CAE integration.
-
Anonymous users2024-02-06The method provided above is to have a special interface setting, which is generally to save the file in as . format, and then import the above file in the format of .
-
Anonymous users2024-02-05Totally agree with the approach of the 4th floor. Mine does just that, it's convenient.
-
Anonymous users2024-02-041. If you want to show a solid model, use the upstairs statement;
2. If it is a complex geometry, in many cases there will be broken surfaces and broken lines, at this time, you can not directly generate three-dimensional solids, but only generate surfaces, generally various surfaces, at this time, you need to further geometry cleaning and repair, the method is the same as modeling in ANSYS, of course, in order to speed up the repair, you can make reasonable use of tolerance settings, and selectors, until the entire surface (one does not make a body) or part of the surface (multiple bodies) is closed to detect the delay, and then use the va command to generate the solid, Then just divide the mesh;
3. In order to obtain a high-quality mesh, the division of blocks can be considered in the process of geometric cleaning and repair, so that geometric modeling and meshing can be carried out at the same time;
-
Anonymous users2024-02-03If it is only a high pre-analysis of the strength of the anti-compression repentant eggplant, there is no need to import it into ANSYS, directly import it into the workbench, select the plastic material Qi Mu, and then directly divide the mesh and load the load. In Workbench, the cells and grids can be automatically given by the software, which is very suitable for novice applications.
This problem is caused by the modification of the path of the map specified by the model you have made.,If you want to eliminate it, you will re-assign the sub-texture.,And remember to archive a max after making a thing.,If you want to open it later, open it in the archive package.Archive method.。 >>>More
Add 9 or more excellent items, it is best to destroy the above high-level items: Condor Feather, a Condor Tinder, a Mayan Gem, a Soul Gem, a group of ten combinations, a Blessing Gem, and a Creation Gem. He 3D Feifei must take the highest ** to combine. +11 to +13 chasing 8 or more, the highest synthesis rate is 40%, and all the synthetic materials are put on the process of combining, waiting for about 2 minutes, pressing OK 3D, the synthesis rate is very low, and it is not easy to combine. >>>More
The whole process of hair implantation can be divided into steps such as hair transplant design, hair follicle extraction, hair follicle separation, and hair follicle implantation. Hair transplantation is a more scientific and effective means of hair loss, professional hair transplant physicians will use microsurgical techniques, local anesthetic injection in the back of the brain to remove this part of the healthy hair follicle tissue, after careful processing and culture, according to the natural hair growth direction of the artist's baldness, hair loss in the part of the artist, to improve the problem of hair loss. The implanted hair retains all the attributes of the original hair, and can grow normally, and there is no trace of hair transplantation after surgery, so the effect of hair implantation is guaranteed. >>>More
I've figured it out for myself, and if you like it, pay attention to it!
If you want to start a business, it is recommended that you choose a suitable entrepreneurial project, see if you have the qualifications of the relevant project, and work hard after finding the right project. Of course, capital is also a problem to consider in the process of starting a business, and if you have limited start-up capital, you can solve it through small loans. >>>More