If you buy a fishing rod and don t tie the line set, ask if the drift seat is useful, can you do it?

As the name suggests, the drift seat is a rubber seat, elastic, and the drift is inserted on the top to be fixed, and there is a small circle at the top of the drift seat to let the fishing line pass through, in order not to let the drift slide on the fishing line, and the position can be adjusted when needed, the space bean is used, which is the rubber particles that are fixed with anti-slip, and the drift seat is one grain up and down.

There are 3 types of drift seats: movable drift seats, copper head drift seats, and metal ring drift seats.

1. The middle finger of the drift fishing tackle is shaped as a round pipe, and a circle is attached to the bottom end. After inserting the tail drift rod inside the round tube. A drift sleeve in which the circle at the bottom of the line slides freely.

2. It is made of rubber and plastic materials. It is elastic, and the float is inserted into the top to be fixed, and there is a small circle at the top of the float seat that allows the line to pass through, so as not to slide on the line. And according to the different water depth, the position can be adjusted when needed, with space beans, that is, anti-slip fixed rubber particles, one up and down the drift seat.

3. There is a method in this link about the method of tying the line, and I wish you a happy fishing.

Yes, it means that there is no fish on the bait, you can not do it, but generally only the master will not want to.

Float is used to insert floating, and floating is a medium to interpret the movement of fish underwater, which is quite important. There is a big conceptual difference between table fishing and traditional fishing.

The line passes through the float seat and the float is inserted into the float.

There is a convenient line set to buy online.

Drift seats are useless, so it's okay not to want them.

The installation method of fishing float is as follows:

1. Prepare a spherical float.

Second, the plug rod at the tail of the float is aimed at the rubber tube or valve core sleeved on the main line.

3. Insert about 1 5 cm.

Fourth, if it is a vertical float, the method is the same, insert the plug rod at the bottom into the rubber tube or valve core 1 5 cm.

Fifth, the float is installed.

The float has a float sitting, two space beans are fixed, and the float is inserted into the seat without tying.

How to choose the float:

1. According to the depth of the water, the water depth is more than 2 meters, and the slender hard tail is floating. The water depth is less than 2 meters, and it can be floated with either a thin soft tail or a thin hard tail.

2. Hard-tailed float is used for fishing rawmouth, and soft-tailed float is used for fishing slippery fish.

3. Fishing for lightmouth fish with a small thin body floating, the finer the target, the better.

4. The float used for fishing the bottom should not be too low, otherwise it is easy to shake in windy weather, resulting in inaccurate signal.

5. Use a small float for fishing small fish and a large float for fishing big fish.

6. Fishing off the bottom of the cut with a thin body hard tail floating, the thinner and longer the target, the better the effect.

Hello, happy to answer your question, 1. First of all, thread the fishing line through the companion bean. 2. After passing through the beans, continue to drift through the big belly. 3. After that, thread the line through the first small stick of the kara stick.

4. After that, go through the second stick. 5. After that, the two small sticks will be connected together using a kara stick. 6. After that, pull the fishing line out of the kara rod, so that the fishing line does not have winding in the kara rod.

The binding method of vertical drifting and loose drifting is different.

Fishing rod float tying method and difference:

1. If it is a vertical drift, install a space bean, drift seat, and space bean on the fishing line, and the space beans on both sides should be clamped tightly on the drift seat, and the fish drift can be inserted on the drift seat when used.

2. If it is a loose drift, you can wear it on the fishing line one by one.

How to tie the drift seat:

1. Put two space beans on the main line, and lubricate the fishing line with water at this time, which is conducive to the space beans sliding on the fishing line and preventing damage to the fishing line in the process.

2. After putting on two space beans, enter the drifting seat.

3. After the drift seat is installed, continue to install two space beans. In the actual fishing process, the two space beans closest to the drift seat play the role of fixing the drift seat, while the two space beans outside play the role of positioning the water depth.

4. Load a space bean, a lead seat and the last space bean in order, and control the speed of the hook bait falling by moving the position of the drift seat according to the fish condition when fishing.

5. Connect the figure 8 ring and cut off the remaining line, the shorter the line end, the better, to avoid the entanglement between the line and the main line when fishing.

The word ring is used to connect the sub-wire hook group, and you can choose the appropriate sub-wire hook to assemble it according to your own needs.

There are two space beans at both ends of the drifting seat in the fishing line group, and the two grains next to the drifting seat play the role of fixing the drifting seat, and the outer two grains play the role of positioning.

The drift seat is not tied, but fixed with space beans.

When crafting the main story, wear a space bean first, then put on a drift seat, and then wear a space bean, so that the drift seat can be fixed.

With space beans and drift seats, plug it in.

There are a lot of fishing enthusiasts and friends like to fish, but because it is a beginner, I don't know how to tie the fishing line hook, how to install the fish drift sinker, how to connect the fishing line with the fishing rod, the following I will install the fishing line hook and the seven star drift, the plumb sinker, the space bean, and connect the fishing rod steps to write a little experience for you, I hope it will be helpful to the beginner fishing friends.

Tools Raw materials.

Fishing line. Fishhook.

Seven Star Float or Vertical Float.

Space beans, plumb sinkers.

Scissors, vises.

Method steps.

Preparation: Prepare some necessary tools such as fishing line, hooks, seven star drifts, plumb sinkers, space beans, and scissors. The first installation is the Seven Star Drift, because I personally prefer to use the Seven Star Drift, because it is more sensitive to use, the fish is more accurate and fast, suitable for wild fishing small crucian carp and other occasions, I use the number burgundy fishing line, standard diameter, the hook is 6-7 black sleeve or gold sleeve hook, Seven Star Drift is centimeter small, plumb weight, space beans have no fixed standard can be large or small.

Let's take a look at the steps:

Step 1: The Seven Star Drift we bought is a set of sets, thread the fishing line through the wire hole under the Seven Star Drift, and then pull the drift to the line, which is generally six pieces, and pull it to the line one by one according to the steps. Note that the rougher drift is placed in the middle position, it will look better.

Step 2: Install the space bean, fold the line a little bit, and also penetrate it from the steel wire hole under the space bean, and then pull the space bean to the line, cut the thin steel wire with scissors, throw away the unwanted part, tie a knot in the front part, use it to fix the space bean, and prevent it from sliding down, this is used to connect the fishing rod, it is very simple and convenient, I didn't know how to use this before, and it is very laborious to install the fishing line and fishing rod after using this, Put the circle on the front of the space bean on the red rope at the top of the fishing rod, and then pull the space bean upwards to secure it.

Step 4: Install the plumb sinker. Because I use a centimeter small size of the seven star drift, so the lead sinker can not be too heavy, otherwise the hook will sink into the water, if the drift is larger can be adjusted with the corresponding lead sinker, how big you can try to drift, it is best to prepare a nail clipper when fishing, if it is heavy can be used to trim the lead sinker, you can adjust flexibly when fishing.

end precautions.

There will be a folded part of the fishing line after the Seven Star Drift is pulled in, please change a section and then continue the operation, and cut off the folded part with scissors after all the pulling is on the line, so that the fishing line is not easy to break.

After the hook is installed, the excess part of the fishing line can be rolled into two strands and fixed with a lead sinker, so that the tied hook is not easy to fall off.

1. Valve core connection method.

1) Tie the end of the soft belt on the tip of the rod in a knot and fold it into a semi-circular arc.

2) Take a section of the valve core and cover the soft belt.

3) Thread the fishing line through the soft belt loop and tie a knot to make it.

4) When taking the wire, withdraw the valve core from the soft belt.

Second, the looper ring connection method.

The looper ring connection method is very simple and robust, making it very suitable for use. Specific steps:

1) Start by punching a pimple at the top of the soft band.

2) Tie a loop at the top of the fishing line.

3) Fold the rings in half to form a double ring.

4) Overlap the double rings on top of each other.

5) Thread the soft strap through the ring.

6) Tighten the wire so that the ring tightly fits the soft belt.

To take the thread, simply release the ring and exit the soft strap from the ring.

3. Rubber band connection method.

1) Put a rubber band on the rod. As for where to put it on the rod body, you can flexibly grasp it according to the length of the line (referring to the line before the tip of the rod). If you want to keep the thread longer, put a rubber band on the first few sections of the pole; If you want to keep the thread shorter, put the thread on the back sections of the pole.

Wrap the rod a few more times so that it does not move forward.

2) Wear a valve core or rubber cap on the fishing line first.

4) Connect with a rubber band with a connecting ring.

Fourth, the connecting ring connection method.

It is easy to connect the fishing line with a connecting ring. The specific steps are:

1) Tie the soft band on the tip of the rod into a ring and tie it tightly with a thread.

2) Connect the connecting ring with the soft belt ring.

3) Remove the connecting ring after fishing.

Fifth, the space bean connection method.

1) Fold the top of the fishing line into a semi-circular shape.

2) Pass the space beans through the semi-ring.

3) Tie a knot with the soft band on the tip of the rod.

4) Wrap the semi-circular toroidal coil around the soft belt.

5) Tighten the fishing line, shrink the coil, and tighten the soft belt.

6) When taking the wire, expand the coil and pull out the soft belt.

Main line: Intercept the fishing line according to the length of the rod, and then string the small pieces according to the following number and order, two space beans, one floating, three space beans, one lead seat, one space bean, and finally a figure eight ring at the end. Fold a section of about 15 cm of double strand wire at the end of the other line, tie the knot at both ends, leave a distance of about 7-8 cm between the two knots, use two fingers to pass through the double strands in the middle of the two knots when hanging the rod, and wrap it back from the outside to make the double strands form a live buckle, which can be used behind the dead knot buckled on the nylon rope of the fishing rod rod.

After use, pull the knot on the top to untie the live buckle.

Fishing rod: A dead knot is tied at the top of the nylon rope with a slight rod to hold the line in place.

Strands: Tie two hooks and tie a knot in the middle, requiring a difference of centimeters between the length of the lines at both ends of the knot. When used, you can tie a dead buckle after passing through the figure-eight ring of the main line.

Novices are not recommended to tie the line by themselves, it is best to ask the boss to use it in the fishing tackle shop, and then do it yourself after you are familiar with it.