Questions about STAT hard drives

You can enable the auto-detect IDE channel.

1. Identify the computer that does not show the right click - manage - disk management - click on the disk without a disk letter to name the disk letter 2, identify and view the data line 3, the hard disk enclosure problem 4, the hard disk problem.

Tried a few back drafts version of the installation are to restart after entering the official installation interface without stopping the restart,The deep lite version can be installed is to install a large number of software in the stool world,It's so troublesome。 What could be the problem?

Now most of the newly made ghost version of Brother Jujube supports SATA hard drives! Feel free to use it! If it doesn't work, you can use the installed version of the silver shout! Isn't it possible to select SATA to install it? !

There is a problem with the network card driver, if it is the latest version updated, it is recommended to uninstall it and install the official version.

If the driver wizard and other software detect a new version, then update to the public version to try.

Yes, but it's only 500 size, and 250G may not be recognized, and the utility of RAID 0 is to speed up the transfer speed, so think about it crisp.

You can burn a disc to install the system.

Use the NLITE software to integrate the RAID card driver into one system and make it into an iOS image.

The engraved disc can be installed directly.

NLITE software integration RAID card driver online tutorial see for yourself to understand.

If the BIOS supports RAID, the two pieces are directly strung into RAID 0 in the BIOS

See if you can see it in the disk manager, and if you can, reformat it.

One by one, the hard disk should have a bad sector.

When you faint, go to the motherboard BIOS settings and find the "SATA mode" setting item, which generally has three options: SATA AHCI RAID. The landlord sets the "SATA" item as the default, which means that SATA is set to IDE compatibility mode, or SATA is changed to IDE, because the motherboard has different BIOS settings due to different brands, but it is generally the same!

In this way, there is no need to install SATA hard drive when the system is reinstalled or related operations! AHCI needs to install SATA driver, and only then can the NCQ function be enabled; And RAD is only involved when building a redundant array of RAID disks with multiple drives!

Hello, in this case, it is recommended that you upgrade to the latest version to try it, or contact the official website customer service.

The SATA interface is simply faster than an IDE.

SATA1 wasn't much faster.

SAT2 is a lot faster.

The shape of the interface is different, you see if your motherboard has a SATA port, no sure no, SATA1, 2 interface is the same, it depends on whether the motherboard supports 2, if it is not supported, plug in 2 is only 1 speed.

The SATA you say is the serial ATA is the parallel SATA transmission speed is faster than the parallel ATA.

SATA does not need a drive on the hard disk with its own drive.

SATA hard drives do not need to be installed and can be used.

To give you an idea: your hard drive is. Earlier motherboards only supported the SATA standard. You can adjust the hard disk to. Refer to the knowledge of the Internet. You can manually adjust the jumper of the hard disk by yourself.