How do two Ethernet devices in my house share?

Just buy a wireless router and you're good to go.

How to set up: Take the D-Link DI-624+A wireless router as an example:

Note: There is a reset button on the back of the router.

Wireless Router Connection Method:

ADSL modem is connected to the WAN interface;

The desktop is connected to the LAN port;

Plug in the power supply; Restart your computer.

My computer. How to set up a wireless router:

Turn on IE, enter.

Username: admin; Password: (empty);

Go to the home page and click"tools"to set a new password;

Click "Time Setting" on the left to turn off NTP and set the time manually;

Go back to the "Home Page", enter "WAN", select PPPoE on ADSL Internet access, dynamic PPPoE and enter the user name and password, and select "Automatic" in the online mode;

Click "Wi-Fi" on the left to change the SSID name and channel. Secure mode: WPA-PSK, encryption mode: AES, enter a shared password.

This one**.

If you use wiring, you can buy a router, and if you want to go wireless, you can buy a wireless router and 2 wireless network cards. If you want to connect one wiring and one is not connected, it is troublesome. A wireless network card is 60-70 pieces, and the wireless router is about 300 pieces.

A common wiring line consists of 60-80 blocks.

Multiple computers use routers to connect to the Internet.

Equipment purchase: When buying a broadband router, tell the merchant what it is when you buy it"Telecommunications"Still"Netcom",Equipment needs,Four ports can be on it (if there are more computers can be added).

Brands generally have"d_link"or"tp_link"

Connection steps: 1. After buying, unplug the cable that was originally connected to the computer network card, 2. Plug it into the broadband router you just bought"wan"On the mouth, 3, I am looking for a peer network cable with a crystal head, 4, one end is plugged into the network card of the computer, and one end is plugged into any port of the broadband router 1-4, so that it is connected.

5. Repeat 3-4 steps for the connection of the other unit.

Settings: 1. Turn on, the broadband router should also be connected to the power supply, 2. Please read the manual carefully, because the manual has the IP address of the router you want, and you also need to know the account and password of the router, so you must obtain the above three information from the manual before you can enter the router interface for setting.

3. Enter and press enter in the address bar of IE, and the username and password will appear as "admin 123456" respectively. Note: The address, account, and password in the manual, as different brands of broadband routers are different.

4. IE pops up the setting interface of the router, select the setup wizard, there are three options in the next step, select "PPOE" Next, enter the Internet account and password of the existing "cat", next, save it.

How to set up Internet access with router sharing:

How to configure a wireless router and how to set it up:

Wireless Rotation Rental Router Security Setup Type Rotten and Password Method:

For a more detailed look, check out the Deerlinger House.