How to choose high quality panel furniture

First of all, to check the appearance of the product and the quality of the surface, the purchase of furniture mainly depends on the surface of the furniture material whether there are scratches, indentations, water traces, bubbles and glue residues in the veneer to leave bumps, there are no above defects The appearance of the furniture surface wood grain is clear and natural, smooth and flat, with good visual effect and feel, for the purchase of symmetrical furniture, it is necessary to pay attention to the color of the two boards, and the consistency and coordination of the texture make people feel that the two plates are like a piece of material.

Secondly, pay attention to the firmness of the furniture structure, gently push the furniture with your hands, if there is shaking or making a sound, it means that the structure is not firm.

Clause. Third, pay attention to the gap between the movable parts of the furniture. For example: door seams, drawer seams, to the gap is appropriate, balanced is good, and the door and drawer should be opened and closed freely, no noise, but also to see whether the surface coating of hardware accessories has peeling phenomenon.

Clause. Fourth, check the quality of the edge banding of the board, see whether the edge of the board has chipping, unevenness, warping, good edge banding should be tightly pasted with the board, the surface is smooth, no roughness.

Look at the size of the size].

When purchasing panel furniture, it is necessary to look at the size of the furniture, the main size of the furniture, and the national standards have specified requirements. For example:

The wardrobe stipulates that the depth of the space in the hanging wardrobe should be 530 mm.

Table furniture is specified in height of 680-760 mm.

The clearance height between the bookcase floors should be 230-310 mm.

Look at the quality of the plate].

When buying panel furniture, it is necessary to look at the quality of the panel:

Carefully check whether the glue is evenly applied on the decorative parts of the edges and surfaces of the plate.

Whether the bond is firm and whether the trimming is smooth and smooth.

Whether the end face of the visible parts such as the side panel, door panel, drawer panel, etc. is edge-banded.

There are no signs of bonding on the well-decorated edge of the panel.

The assembly combination mainly depends on whether the tongue and groove at the drilling hole is delicate and neat, and whether the connector is firm after installation.

Is there a gap between the T-shaped seam after the plane is connected to the end face, and there is no loosening phenomenon when pushed by hand.

Look at the veneer of the edge banding].

When buying panel furniture, look at the veneer of the edge banding:

Look carefully for flaws, the quality of edge banding greatly affects the quality of furniture.

First of all, the advantages and disadvantages of the edge banding material, and secondly, we should pay attention to whether the edge banding is uneven and warped.

A good edge banding should fit perfectly into the entire board.

Look at the hardware connectors].

When purchasing panel furniture, you need hardware connectors, because panel furniture can be disassembled and assembled at will, so the hardware connector is very important

Hardware connectors are the most intuitive quality standards, good hardware should be opened and closed freely, no noise, and no peeling of the surface plating.

The hardware of some high-end panel furniture is imported, and foreign language logos can be found on it.

Metal parts are required to be dexterous, smooth, and have good surface electroplating treatment, without rust, burrs, etc., and the precision of the matching parts should be high.

The plastic parts should be beautiful in shape, bright in color, and the strength and elasticity of the parts in use should not be too thin.

The opening connector requires flexible rotation, so that the furniture will be smooth and easy to open and use, and there is no frictional sound.

Selection of substratesAt present, the substrate of the panel wardrobe mainly has 1Solid wood particle board (known as particleboard) 2MDF (known as MDF) among them.

Particle board is the most used in custom wardrobes, you can take a look at its cross-section, relatively loose, but as a wardrobe is completely sufficient, because the wardrobe is to stack or hang clothes, do not need too high load-bearing. The difference between MDF and particle board is that MDF is made of wood fiber, the raw material is thinner, and the board made is also tighter, so it has better load-bearing capacity, and some load-bearing furniture, such as.

Wine cabinet bookcase, will use this kind of board, but also because of its high density, so the glue content is larger, some people are worried that it is not as environmentally friendly as particle board In fact, I personally think that in addition to the impact of the substrate in terms of environmental protection.

Another important point is edge banding technology.

Look at the borders inside the panel furniture.

Hardware is very important, take the wardrobe as an example.

The most important thing is on the door, because the service life of the door directly affects the service life of the wardrobe, and the endless service life determines the life of the door. The borders of the wardrobe doors are all metal.

So we need to know the thickness of the section, which is generally down to a micron. The frame is equipped with anti-collision strips, rubber and fiber, which depends on personal preferences, but there is a point.

It's better not to use glue here, so it's more environmentally friendly.

Top and bottom wheels These two are very important Generally, big brands of hardware will have brand logos on them, and my ** also has it, but it has been ps. The wheels are best closed to try, so that they do not enter the dust, the service life is longer, the material of the wheels is less than nylon, and the better ones are glass carbon fiber.

Track The track must be smooth and well matched with the bottom wheel to smooth the wardrobe door and the service life of the door can be longer.

The role of the wardrobe is to put clothes, but everyone's living habits are different, each family pattern is not the same, a good pattern is to make the wardrobe not only to coordinate with the whole house, but also to meet the owner's habits of storing clothes.

Color The wardrobe plays an important role in the bedroom, so its color has a great impact on the overall color balance of the bedroom, which requires you to choose a suitable color for yourself or the designer.

Panel furniture is good, there are many advantages, young, fashionable, color choice, variety of styles, and now basically larger brands also support customization First of all, look at what style you drive, generally speaking, many people like all furniture, at least the furniture in a room is a style, tone, the easiest way is to buy in the same house; The second is to see, the general panel furniture is relatively affordable, but it also needs to be compared, go to a few more brands, there are too many panel furniture brands in the same store, there are many furniture styles similar, the same similar furniture, a comparison to know which one is more suitable; Then look at the quality, including the details of the workmanship, can be seen, open the drawer to see, open the cabinet door to see, to see if the hinge, track, handle, screw look good quality panel furniture is generally lighter, but it will not be too light, otherwise it means that the materials are too unreal There are many particularly good panel furniture, the weight is comparable to solid wood furniture

In fact, now to buy furniture first to determine what plate to buy, and then look at the price and style, if the first choice of environmental protection, choose Germany imported EGGER plate, or dew river plate Dew River is relatively cheap, environmental protection can also reach E0 level, but you have to choose the right brand, too much fraud,

Self-recommend this brand (Baida Bona furniture), professional panel furniture manufacturing, mainly export-oriented, domestic in Tianjin, Panzhihua, Nanjing, Guiyang with a monopoly, network sales is the factory direct delivery of brand discount stores (**).

It mainly depends on whether the surface of the plate has defects such as scratches, indentations, bubbling, degumming and peeling and glue marks; Whether the wood grain pattern is natural and smooth, do not have a feeling of artificiality; For symmetrical furniture, it is necessary to pay more attention to the consistency and harmony of the color and texture of the board, so that people feel that the symmetrical plate is like coming from a piece of material. The rationality and firmness of the connection points between each component of the furniture. If a piece of furniture is combined, its hardware connections should be of high quality, and the fit of the hardware itself and the fit with the furniture must be very ideal.

For furniture of the overall structure, each connection point, including the connection points between horizontal and vertical, must be tight, without gaps and cannot be loosened. Another example is surface treatment, where the open paint treatment, the wood grain, the brown eye of the wood must be presented, with a three-dimensional effect. Where the sealed paint treatment, the surface feels the best like the top coat of a piano, whether it is clear oil, mixed oil, matte, high gloss or flat gloss, the cleanliness, smoothness and hardness of the paint surface must be high.

Looking at the veneer, it is necessary to make the surface of the veneer flat and not blistered; There must not be any traces of complementary color on the veneer; The texture of the veneer is dense, there is no gap between the splicing and the splicing, the pattern should be accurate, whether it is on a plane or in the corner, in addition to the use of color difference, the color difference of the veneer on a surface should be very small. The production quality of the plate is mainly based on the quality of the saw, the decoration and surface decoration and the quality of the plate port. The better brand of panel furniture is Qumei furniture, their new board experience is exciting**The furniture in the event is all E0-level imported plates, which are very environmentally friendly and healthy, especially during the event** purchase can also be discounted by 6,000 yuan, and a set of living room furniture is less than 6,000 pieces.

The event ended on June 16.