Can the guillotine beam on the first floor be knocked out? Can the load bearing wall with beams on t

Hello, the broken beam on the first floor can not be removed, which will affect the safety of the whole building, although he is a broken beam, but he also has to bear the weight of a force of the whole building, please be cautious, thank you, I hope to help you.

Of course, when you can knock down the interior decoration, many doors and window sills have to be knocked off, so as not to affect the expansion of space, but you must pay attention to the load-bearing wall, which must not be destroyed.

Yes, if you think the broken beam on the first floor is an eyesore, you can knock it off, and it will not affect the overall house, so don't worry.

No, it is a complete structure, and the removal of the guillotine beam will have a damaging effect on the entire building.

The guillotine beam on the first floor cannot be knocked off, this guillotine beam is load-bearing, and if you knock it off, it is very dangerous.

In this case, it will be easy to reinforce after knocking it out. If the function of the left and right rooms of this beam is consistent with the original design, you can use a steel beam to replace it, and pay attention to the nodes. Or, directly knock out the beam, cast-in-place concrete slab, and then need to check whether the bearing capacity of the beams on the left and right sides is sufficient.

In addition, after the cast-in-place floor slab, pay attention to the use of lightweight partition wall on the upper partition wall to reduce the weight of the wall.

The guillotine beam on the first floor cannot be knocked off. Measurement plays an important supporting role in the building.

Just like can the broken beam be knocked out, the broken beam on the first floor must not be knocked off because your building collapsed into Zhao Liang is the weight of the entire building, no matter the decoration or renovation, don't knock off the beam casually.

Can the guillotine beam on the first floor be knocked out?

I don't think you can lose short hair because it plays a weight-bearing role.

Therefore, the broken beam cannot be knocked off, which is very harmful to the overall structure of the house.

Think mine is okay, okay?

You have to take a look at this, is it load-bearing beam? If you don't have a load, you can knock it off.

It depends on whether it is weighed or not, and it is best not to knock it off for safety reasons.

The beam is not load-bearing, and if it is, it is not.

The flux of the 1st floor section can be hit**, of course, it can be hit**, but it is best not to hit the Diaoyu Islands.

The first floor is not allowed to be removed, this is not allowed, and there may be potential insecurity factors.

Can the guillotine beam on the first floor be knocked out? Can't this be knocked out and have a love for the house?

The broken beam on the first floor cannot be knocked out. He must still have a certain load-bearing capacity, so there will be safety hazards when knocked out.

1st floor, but the mother-in-law can't be knocked off, because every step of his life is indispensable.

Beams that are not associated with the main structure can be removed. However, it is necessary to pay attention to the top layer of the building, if it is the original building, it cannot be knocked off. In general, it is best not to dismantle the beams, because the beams are subjected to lateral loads and maintain the stability of the building.

The beam construction technology support is arranged and the beam support includes a steel pipe column, a longitudinal and transverse bridge to a decorative rod, a wall rod, a corbel, a sand cylinder, a steel beam, a load-bearing longitudinal beam, etc.

The beams are load-bearing. It is best not to knock it off, especially on the first floor, where the weight is more, so it is recommended not to knock it off.

The one that can be knocked out basically doesn't have much effect, as long as you keep the heavy problem, you can remove it.

Hello The load-bearing wall with beams can not be knocked out for the following reasons: 1. The load-bearing wall with beams supports the wall of the upper floor component, and it is a black wall on the foundation of the engineering drawing, and it will damage all the building structures. In our house, the component of the floor seepage hidden slab, the component of furniture, etc., should be passed through the floor slab to the load-bearing wall, structural beam, and then through the load-bearing wall, the beam to the base load-bearing wall or structural column, and then to the foundation.

The structural skeleton that makes up all houses, like the bones of the human body, is an important part of the resolution of safety 2. The load-bearing wall supports the weight of the floor slab, the weight of the furniture in the house, and transfers the weight to the load-bearing wall and structural beams on the next floor. Non-load-bearing walls are walls made of lightweight, simple materials, and compared with load-bearing walls, non-load-bearing walls are generally thinner and are only used as partition walls. 3. Once the load-bearing wall is knocked down or damaged, it will have serious consequences.

Don't think that you can remove some load-bearing walls and then achieve the original load-bearing capacity through reinforcement methods such as reinforcement planting and steel sticking, in fact, it is necessary to obtain the approval of the property before making these construction changes. Precautions: It is best not to change the wall easily, the load-bearing wall can not be dismantled, and some non-load-bearing walls also play a certain load-bearing role.

If it is necessary to demolish and alter, only light structural walls, such as light steel keels, gypsum board walls or cement board light walls, which act as partitions, can be demolished and modified. The house does not see the columns and beams, the reinforced concrete wall is used to bear the load, this wall is generally thicker, this wall must not be demolished, and the demolition affects the safety of the whole building. Many people do not know what the structure of their house is, if the wall is demolished, you must find an experienced decoration company to take a look, understand the wall structure and then make a decision, to avoid the danger caused by random demolition and modification.

Dear, hello, the load-bearing wall with beams on the first floor can not be knocked off Oh reasons: 1. The load-bearing wall with beams supports the wall of the upper floor component, and the black wall is repentant on the engineering drawing, and it will damage all the building structures. 2. The load-bearing wall supports the weight of the floor slab and the weight of the furniture in the house, and transfers the weight to the load-bearing wall and structural beams of the next floor.

The non-load-bearing wall is a wall made of lightweight and simple materials, and compared with the load-bearing wall, the non-load-bearing wall is generally thinner, and it is only used as a partition wall for jujubes.

The problem is not clear, it is impossible to smash all the beams and columns on the first floor, and smashing them all is equivalent to demolishing the building. Is it true that smashing a pillar on the first floor and the four beams on top of the pillar reduces one floor slab and expands the local space?

From a technical point of view, there's nothing you can't do. If it must be smashed, reliable reinforcement measures should be taken, including reinforcement of the surrounding columns, which increases their bearing capacity and shares the upstairs load borne by the cancelled columns; The corresponding roof beam on the second floor needs to be reinforced, which means that the original beam span has become larger; Check whether the bearing capacity of the foundation under the surrounding columns can guarantee the increased load; The overall stability of the building needs to be reinforced to ensure that the seismic performance of the building remains unchanged; It is possible to ensure the safety of the demolished beams and columns and the entire building. These tasks can only be done by professionals, professional institutions.

From the perspective of ordinary people, no.

First of all, the pillars on the first floor are absolutely unsmashable, and the pillars on any floor cannot be smashed. The pillars are gone, and the building is ruined. Even if the top support measures are taken, it is too overhanging, and no matter how the top is not able to completely replace the role of the original column, there must be settlement.

The impact of the local beam slab on the first floor is smaller, and only the part of the local roof on the first floor is involved. In addition, the overall weight of the building is reduced, and the foundation is not affected. But the overall stability of the building is not easy to solve, no** fine.