How to disassemble the thermostat of the BCD 215KAM model of Haier refrigerator?

The structure of the thermostat is still relatively simple, I had one before that was also BCD, but it was a 50-liter one, the thermostat was on the switch for temperature adjustment, and then took a look at the side of the cover, there should be a screw loosened, and the entire cover could be taken down, and the internal structure could be seen.

1. Open the refrigerator and find the thermostat. Refrigerator thermostats are generally installed in refrigerator rooms and are often co-located with the lights in refrigerators.

2. Then use a Phillips driver to remove the two fixing screws on the thermostat cover.

3. Grab the cover of the thermostat with your hand and pull it out slightly to remove the cover, remember not to use too much force to avoid tearing the connected wires. The inner end of the cover is secured by the card slot, so do not push it in or pull it down.

4. Use a Phillips driver to remove the two screws that fix the thermostat, and then carefully unplug the four wire plugs connected to the thermostat (be sure to remember which color wire plug is plugged into which connector of the thermostat before unplugging).

5. Then gently and slowly pull out the temperature control tube inserted in the inner wall of the refrigerator (the temperature control tube is generally dozens of centimeters long), and then take out the entire thermostat.

For the disassembly and assembly of the thermostat of the direct-cooled refrigerator, the following method can be carried out: first, remove the thermostat tube clamped on the evaporator, loosen the screws that fix the thermostat box, then pull out the scale knob of the thermostat, and then loosen the screws that fix the thermostat in the thermostat control box, and the thermostat can be taken out.

It is best not to disassemble the refrigerator, if you have to disassemble it, you need to disassemble the front panel.

Haier refrigerator BCD 215DF, after the power is turned on, the temperature of the refrigerator and freezer is set according to the manual, the panel keeps showing 31 refrigeration, and the temperature of the freezer is 37°, and the number is still flashing. A few hours passed, and neither refrigeration nor freezing worked

The thermostat inside the Haier refrigerator is removed by opening the lid of the machine underneath.

How to disassemble the thermostat, how can it be clear here, it is best to find an after-sales or professional maintenance master to help you disassemble or replace.

Some refrigerators automatically adjust the temperature, if you set it too low, it will automatically return to the normal position If the refrigeration is not normal, I feel that it is a problem with the refrigerant, contact the official 400 to deal with it.

Summer 2 3;Spring-Autumn 3 4;Winter 4 5, the landlord can try this adjustment method.

People's DCT, his 215, his scientific research, its model, his thermostat can also be removed, and we must find those professionals to dismantle.

1. First click the function selection button to wake up the refrigerator screen.

2. After that, click on the freezing temperature in the picture to adjust the temperature of the freezer compartment of the refrigerator, and press the temperature to reduce it by one degree.

3. After that, click the refrigerator temperature adjustment button in the upper right corner to adjust the temperature of the refrigerator.

4. Press the refrigeration button once to reduce the temperature by one degree.

5. Press the function button twice in a row to start the intelligent temperature mode of the refrigerator, and the temperature can be intelligently adjusted according to the number of items.

How to adjust the temperature of Haier BCD-225SDPC refrigerator? This Haier BCD-225SDPC refrigerator has three temperature zones: freezer, variable temperature and refrigerator, and the temperature is mainly adjusted by the electronic buttons on the refrigerator panel. Adjustable range of temperature in the refrigerator:

1℃--10℃；Variable temperature adjustable range: -7 -10; Freezer temperature adjustable range: -16 --26; On the Internet, such as infringement, contact to delete Haier BCD-225SDPC refrigerator performance parameter extension:

Product Category:Three Door Panel Material:ppm Panel Color:

Silver white total volume: 225L Temperature control mode: computer temperature control cold mode:

Direct cooling energy efficiency class: Class 1 rated power consumption: kWh refrigerant:

Hello! Just use the artificial intelligence on Haier! Or refrigerate 5 degrees, change temperature -7 degrees, refrigerate -18 degrees!

A refrigeration device that keeps a refrigerator at a constant low temperature, and it is also a civilian product that keeps food or other items in a constant low temperature and cold state. Inside the box there is a compressor, a cabinet or box for ice making for icing, and a storage box with a refrigeration unit.

This refrigerator is computer temperature controlled, if you don't know much about temperature regulation, it is recommended to use artificial intelligence to adjust. If you have to adjust it manually, the refrigeration is generally about 5 degrees, and the freezing is generally -12 degrees or less, and the specific value should be decided according to the actual environment.

Basic parameters: 1. Product category: three doors.

2. Total volume: 252L.

3. Refrigeration room volume: 187L.

4. Freezer volume: 65L.

5. Refrigeration capacity: 15kg 24h.

If it is a computer temperature control, you don't need to adjust it, if not, adjust the temperature control switch in the refrigerator, and put it in the fourth, if you always feel that the temperature is not low enough, 1, check whether the freezer is too thick to freeze, and you have not de-iced 2 Check whether the refrigerant is slightly leaked.

The most easy mistake of the refrigerator is to adjust the temperature, generally all year round, if it is troublesome, just adjust it to the third gear, the temperature will generally correspond automatically, and there is no other use of the refrigerator.

Summary. Good afternoon, dear, I'm glad to answer this question for you, the answer to this question is as follows, please take a look. Location of the Haier refrigerator BCD-218K thermostat:

The Haier BCD218K thermostat is at the top of the right side of the rotating refrigerator, the temperature control switch is at the top of the right side of the rotating refrigerator, and the temperature knob and the arrow of the knob point to the "stronger", the lower the temperature in the box; The "weaker" the rotating arrow, the higher the temperature inside the box; "Off" means stop working.

Where is the location of the BCD-218K thermostat of Haier refrigerator**? How do I replace it?

Good afternoon, dear, I'm glad to answer this question for you, the answer to this question is as follows. The position of the BCD-218K thermostat of the Haier refrigerator: the Haier BCD218K thermostat is at the top of the right side of the rotating refrigerator, the temperature control switch is at the top of the right side of the rotating refrigerator, and the temperature knob on the top of the rotary refrigerator, the stronger the knob arrow points to, the lower the temperature in the box; The "weaker" the rotating arrow, the higher the temperature inside the box; "Guan" means to stop working.

Replacement method:1Find the refrigerator thermostat to open the refrigerator and find the temperature controller.

Refrigerator temperature controllers are usually installed in refrigerators and are usually installed along with the lights in refrigerators. Use a crossdriver to remove the two set screws on the temperature controller cover. 2.

Remove the thermostat cover, grasp the thermostat cover with your hands, and pull it out slightly harder to remove. Remember not to push too hard to avoid disconnecting the wires. The inner end of the cover is held in place by the card slot, do not push inward or pull down.

3.Remove the set screwsUse a Cross driver to remove the two screws holding the temperature controller in place, then carefully unplug the four wires connected to the temperature controller (remember which connector to plug in the temperature controller before unplugging). 4.

Before removing the thermostat, gently and slowly pull out the thermostat inserted into the inner wall of the refrigerator (the thermostat is generally tens of centimeters long), and then take out the entire thermostat. 5.Install a new thermostat in the opposite direction of removing the old thermostat.

First insert the temperature control tube into the inner wall of the refrigerator, then insert four wire plugs of different colors into the corresponding connector of the temperature controller, then fix the temperature controller to the lid with screws, put one end of the lid flat into the slot, and the other end with a screw. At this point, the installation is complete. The energized testing machine, everything is normal, and the replacement of the temperature controller Huishan draft is successful.

Didn't help. This refrigerator does not have mechanical adjustments.

That's smart, can you send a **? Kiss.

There should be a prompt on the refrigerator, for example, the initial letter of the temperature prompt starts with T, which is the temperature control switch.

Where is the location of the BCD-218K thermostat of Haier refrigerator**? How do I replace it?

Hello, the thermostat of the Haier Refrigerator BCD-218K Hu Xiao is usually located on the control panel inside the refrigerator. To replace the thermostat, you can follow these steps:1

Disconnect the power supply: Always unplug your refrigerator before making any repairs or replacements to avoid the risk of electric shock. 2.

Open the Refrigerator Door: Opens the refrigerator door to give you easy access to the control panel. 3.

Disassembling the control panel: Depending on the design of the refrigerator, the control panel may be fixed to the front panel inside the refrigerator, or it may be a stand-alone module. Please locate the control panel and disassemble it according to your refrigerator model and design.

Some control panels may need to be removed using a screwdriver or other tools, while others may simply need to be gently pressed or rotated to unfasten. 4.Disconnect the cable:

When disassembling the control panel, you may find that the thermostat is connected to other wires or connectors. Please disconnect the cord carefully, making sure that no wires or connectors are damaged. 5.

Replace the thermostat: Once you have removed the old thermostat, you can plug the new thermostat into the same location and reconnect the wires or connectors. Make sure all connections are secure and correct.

6.Install the control panel: Reinstall the control panel and make sure to fix it with a screw made of gauze or snap.

7.Turn on the power: After replacing the thermostat at the ruler, plug the refrigerator back into the power outlet.