How to connect the toilet inlaid bath bomb to a control light inside and a control light outside?

Yes, you can. Because the bath bomb switch is single-controlled, it cannot realize the dual control of one lamp, you can set a switch outside the bathroom, and the control line of the switch is also connected to the live line of the bath bomb lamp. The electricity delivered to each home is single-phase, regardless of the phase.

In this way, the light that is turned on in the bathroom is turned off on the inside, and the switch on the outside is the same.

Now the bath bombs are all touch-type, the switch is placed in the bathroom, how to control the lighting outside, you can put the switch of the mirror headlight separately at the outdoor door, so that you can directly turn on the mirror headlight when you enter the bathroom, no need to wipe the door, and then only control the bath bomb inside.

Bath bomb control panel.

It is also placed indoors, and the built-in remote control is attached to the bathroom door, so that you can directly turn on the bath bomb lighting when you enter the door, and you can turn on the lighting without wiping it in. If the bathroom is in addition to the bath bomb lighting, the ceiling.

There are other lighting above, so install the touch bath bomb panel inside, and the switch outside directly controls the lighting of other lamps, which can also solve the problem of touching the bath bomb panel. There is no separation of dry and wet, and the exterior side panel controls the headlight lighting of the rearview mirrors; There are other luminaires for wet and dry separation, and the lighting can be controlled individually. There are also professionals who dissect bath bombs and rewire the touch light directly to the external physical switch, which is difficult to achieve, and some cannot be realized at all.

Generally speaking, bath bombs have three switches, two to control the heating lamp and one to control the lighting. In the actual operation process, you can't just deal with the past. Cosmetrically, there is no guarantee that the switch wiring is correct.

Otherwise, the circuit will be burned out, for safety and peace of mind, we need to open it to see if the bath bomb switch is wired correctly. The switch wiring of different bath bomb brands is different, and some brands are better off taking off the lamp before dismantling it. If the bath bomb is wired incorrectly, the following problems generally occur.

When it is turned on, the lighting, heating and exhaust modules are turned on together. Use one if you can.

If you want the master switch to be able to control all of these buttons, and each switch to be able to operate freely according to its own function, then it's not very difficult, if not very easy, for non-specialists. There are two sets of lights on the ceiling of the bathroom: one is a bath bomb light, which can be controlled inside the door; The other set is the independent toilet lighting, which is the main light, which can be controlled outside the door.

The above is the answer to the question of how to control the lighting outside the bathroom and how to control the lighting of the bath bombs now.

The best way is to install a switch on the outside as well, and then connect the wires out, so that two-way control can be realized.

The best thing to do is to install a duplex switch so that it can be controlled from the outside.

Bath bombs are installed in the bathroom, which can not only light but also heat. Therefore, you can choose the appropriate switch position according to the type of bathroom you have.

Summary. Dear, hello, I'm glad to answer for you: How to connect the bath bomb light switch to a socket?

Answer: Kiss Hello The ground wire, the yellow and green one, is on the socket above the bathroom, connected to the shell of the bath bomb. The neutral wire, mostly blue or black, is on the left side of the bathroom on the socket and is connected to the screw connection of the five lamp heads. The live wire, which is red in most cases, is located on the lower right side of the socket and is connected to three.

Three switches, the one for tube lighting, and the other for the center of the lamp head; Two tube heating switches, each with another post connected to the center post of two heating lampheads. In the bath bomb terminal, the 0 bath bomb is connected to 0, and a wire (live wire) is drawn out before the bath bomb switch, and another wire (neutral wire) is drawn from the bath bomb! Plug it in and you're done!

If you want the bath bomb switch to be controlled on and off, connect it after the bath bomb switch (the power should not be too large, otherwise there will be potential safety hazards).

Hello, I am glad to answer for you: how to connect the bath bomb light switch to a socket? Answer: Kiss Hello The ground wire, the yellow and green one, is above the bathroom on the socket leakage, and is connected to the shell of the bath bomb.

The neutral wire, mostly blue or black, is on the left side of the bathroom on the socket and is connected to the screw connection of the five lamp heads. The live wire, which is red in most cases, is located on the lower right side of the socket and is connected to three. Three switches, the one for tube lighting, and the other for the center of the lamp head; Two tube heating switches, each with another post connected to the center post of two heating lampheads.

In the bath bomb terminal marked with n, connect to 0 bath bomb switch before sliding to lead out a wire (live wire), and then lead out another wire (zero line) from the bath bomb! Plug it in and you're done! If you want the bath bomb switch to be controlled on and off, connect it after the bath bomb switch (the power should not be too large, otherwise there will be potential safety hazards).

Inside are 5 threads

Kiss the bath stool so that the switch of the bath bomb can not be connected to the socket, because there is no jack on the bath bomb switch, as shown in the figure: But there is a way to connect the socket, you can install a junction box next to the bath bomb switch, and the socket power supply is the power supply of the bath bomb.

I don't know how to pick it up.

How to pick it up.

You can't connect the socket to the switch of the kiss bath bomb, oh.

That means you can't pick it up.

Yes, dear.

Kiss! Hello, happy to answer your <>

How to connect the virtual switch control light of the remote control bath bomb is as follows: you can set a separate switch next to it, and the control line of the switch is connected to the bath bomb here, remove the control line of the original lighting on the bath bomb line, and connect the control line of the separate switch. These are carried out before there is no sticking tiles, at this time, you can go down the hidden pipe, the cassette, there is a live wire and a control line out in the cascade, which can be communicated with the bath bomb switch, or you can go up alone, and you can't get the tiles after sticking them.

Can the remote control bath bomb light be connected to the outside switch separately? It can be very simple, connect the control line of the bath bomb lamp directly to a separate switch, if the switch has no power supply, you need to connect the power cord of the bath bomb to a separate switch. The first question depends on the type of bath bomb, if you buy a switched bath bomb, you can turn the light on and off outside the single-connected bathroom.

Other wired touch and wireless remote control can't be changed, and their control methods are essentially different. The on-off bath bomb is the same as we control the lights at home, just control the live line on and off (usually a single break switch). The second question is round, two wireless bath bombs that are the same will interfere with each other?

This phenomenon does exist, but the probability is very low, the same kind of wireless bath bomb uses the same communication protocol, and the wireless bath bomb needs to be used to match the code with the remote control and the bath bomb host for the first time, and there is a small serial code situation. Solution: Find a merchant to change the remote control, or don't buy a wireless one, just buy a wired touch.

Hope mine can help you <>

Do you have any other questions?

Summary. Pro,How to add a socket next to the control panel of the bathroom bath bomb:

Pro,How to add a socket next to the control panel of the bathroom bath bomb:

1. There are three power cords for the bath bomb switch wiring:

2. The ground wire, the yellow-green one, is on the socket above the bathroom and connected to the shell of the bath bomb.

3. The zero wire, mostly blue or black, is connected to the socket, at the bottom left of the bathroom, with the screwdrivers of the five lamp holders.

4. The live wire, which is red in most cases, is located at the bottom right of the socket and is connected to the binding posts of the three switches.

Two heating switches, and the other binding post of each heating switch is connected with the center binding post of the two heating lamp heads.

Summary. If your switch is to control the interior lights. Because there is already a light in the bath bomb, you can omit your light, and you don't need to install a switch control line.

If you want to control another lamp or mirror headlight, you can use the light control line in the bath bomb group to connect it in parallel to another lamp or mirror headlamp, and then the light switch on the bath bomb can control the lamp you want to control at the same time. I hope mine can help you.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

What if there is only one switch box in the bathroom, the bath bomb is lit outside, but there is only one switch box.

Hello, I am a paper kite, I am honored to answer your questions for you, met is fate, I will do my best to ask your questions with a letter, is working hard for you to inquire about related questions, please wait a moment, paper kite's work reply time is at 8:00, to 14:00, if there is no timely reply, please be patient.

Wet and dry areas in the bathroom, inside is a bath bomb, outside lighting, now only a switch box is left to control, how to wiring <>

Hello dear, I found the following for you, I hope it can help you. If your switch is to control the interior lights. Because there is already a light in the bath bomb, you can omit your light, and you don't need to install a switch control line.

As you said, the switch control line is to control another lamp or mirror lamp, you can use the lighting control line in the bath bomb group to connect it in parallel to another lamp or mirror lamp, at this time, the light switch on the bath bomb can control the lamp you want to control at the same time. I hope my ability is high enough to help you. If my answer is helpful to you, please also give a thumbs up (in the lower left corner of the leak evaluation), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress.

If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

The switch of the bath bomb can not be connected to the socket, because there is no jack on the bath bomb switch, but there is a way to connect the socket, you can install a junction box next to the bath bomb switch, the power supply of the socket with the bath bomb I hope mine is helpful to you, I wish you a happy life.

Hello, I'm glad to answer for you, how to connect the bath bomb light switch to an outlet? Information about your problem: The bath bomb can not be connected to the socket when the switch is turned off, because there is no jack on the bath bomb switch, but there is a way to connect the socket, you can install a junction box next to the bath bomb switch, and the socket power supply is used by the bath bomb The power supply of the bath bomb hopes that my belt will help you and wish you a happy life.

Related information: The installation of sockets requires six wires (zero wire) If you can't add a wire, and want to install a socket, then you can only answer the cavity to sacrifice a function of the bath bomb, and lift or combine the two functions for a switch control. Consult me again according to your actual situation.

There is a wire box next to it, and there is also a neutral wire inside.

Can it be connected to an outlet?

Yes, pro, don't worry about <>

Three of the two wires connecting the toilet light are reserved, and I want to install a bath bomb, what should I do.

Three of the two lines connecting the toilet light are reserved, and I want to install a bath bomb, what should I do! Hello, happy to answer your <>

Pro: The toilet light connects two lines reserved for three, if you want to install a bath bomb, it is best to add two wires, it is best to add two lines, if you can't increase it, just like that: on the ceiling, connect the zero line to the bath bomb, one of the three wires and the fire wire, and connect the fire wire to the public access hole here, and the other two, one to connect the lighting of the switch, and one to warm one. When cutting the bath bomb before combustion, divide the line from the lighting into two ways, one way to connect the lighting and the other to the ventilation, the heating line, which group of lights can be warmed.

In this way, turn on the light for ventilation and turn, and there is only one set of lamp warmth. The switch of the bath bomb is generally open, and the middle L is connected to the live wire and then the surrounding functions are connected accordingly, and if your bath bomb does not have so many functions, as long as you find the brother you need to use and connect it to the other empty. Hope mine can help you <>

Do you have any other questions?

Many brands of bath bombs have their own special switches, which have control over 1 group of lights, 2 sets of lights, exhaust fans and lights. As long as the switch that controls the lighting is replaced with two double control switches K1 and K2, wiring as shown in the figure below, one switch is installed in the bathroom, and the other is installed outside the bathroom, so that the lighting can be controlled inside and outside the bathroom. The double-control switch is also called the single-pole double-throw switch, the shape is the same as the ordinary switch, but there are three contacts, while the general switch only has two contacts, most of the hardware and electrical materials stores have sold, a little inquiry.