Is the permeable sealing curing agent construction process the concrete curing agent construction pr

Answer: Yes, the permeation sealing curing agent construction process is the concrete curing agent construction process. Penetrating sealant curing agent is also called concrete curing agent.

As for the permeation sealing curing agent construction process or concrete curing agent construction process, we take the Nalut penetrating sealing curing agent construction process or the Nalut concrete curing agent construction process as an example to illustrate.

The construction process of Nalut penetrating sealing curing agent or the construction process of Nalut concrete curing agent is as follows:

Method 1: Defend the construction method.

1. Base surface treatment: Appropriate treatment should be carried out according to the specific situation, such as removing curing agents, oil stains, dust, building slurry, wall residues and removing loose materials left on the foundation surface.

2. Grinding with a grinding machine with 30, 100 mesh, 300 mesh resin grinding discs (wet grinding with water). Grind 3-5 times depending on the ground conditions. The ground should be treated as flat and uniform as possible, and the smoother the ground, the more ideal the effect.

3. After the ground is dry, spray the Nalut polycarbon silicon sealing curing agent on the ground, and push it evenly with dust to ensure that the absorption of the material on the ground is as consistent as possible.

4. After the ground is dry, add water to wet the ground and grind 300, 500 and 1000 mesh grinding discs respectively.

5. Roll through the Nalut polycarbon silicon sealing curing agent with a roller and defend the nails on the ground and dry.

6. Use a high-speed polishing machine with No. 3 animal hair pad to dry and throw the ground. (If there is no high-speed polishing machine, you can use a grinder with 3m black pad dry polishing).

Curing agent: Flooring concrete curing agent.

Which concrete reinforcing agent is better?

Which is the specialty of Jiangxi concrete sealing curing agent floor?

What is the ** of concrete sealing curing agent imported from the United States?

What are the requirements for the cement floor for the construction of concrete sealing curing agent floor?

Who has the construction process of concrete sealing curing agent, please!! 5

Who knows the concrete sealant curing agent CS construction process? Are there any requirements for old and new floors?

Concrete curing agent ground construction technology.

Concrete curing agent floor, also known as wear-resistant hardened floor or concrete hardened floor, it has 9 levels of wear-resistant hardness, suitable for various industrial occasions, such as workshops, warehouses, garages, workshops, etc., concrete curing agent ground construction is simple, life span up to 30 years, with dust-free sand-free, compressive, impermeable and other characteristics.

**The following concrete curing agent ground construction process:

1. Clean the ground: Use professional dust pushing tools or floor scrubbers to clean the garbage and floating ash on the ground. If there is a curing film or floor coating on the ground, it should be removed by machine grinding before construction.

2. Local repair: For the damaged part, cooperate with Deligu floor repair agent for local repair.

3. Coarse grinding ground: 30 concrete metal grinding discs are equipped with floor grinders in turn to coarse grind the concrete ground. According to the condition of the floor foundation, the number of metal grinding discs is determined, and the purpose is to grind the concrete floor flat.

4. Dilute DS601-A agent according to the ratio of DS601-A agent:water = 1:(4 5), spray or roller coat on the ground, and keep infiltrating for 4 hours, during which the material is dragged manually or mechanically to help penetrate and ensure the penetration depth of the sealing curing agent.

5. After the soaking time reaches the requirements, clean any residual DS601-A agent.

6. Fine grinding ground: concrete resin sheet 50 or soft grinding disc (50) are finely ground for concrete floor in turn.

7. Absorb water and dry the ground, which is conducive to the full penetration of DS601-B.

8. Brush the stock solution of DS601-B agent for 4 hours, and keep it moist during the period to ensure that the deep layer of Deligu sealing curing agent is fully reacted to form a hard and dense polysilicon layer with sufficient thickness.

9. Fine grinding ground: concrete resin sheet 400 or soft grinding disc (500) fine grinding ground.

10. Polishing the floor: 800 concrete polishing sheets or soft grinding sheets (2000) polish the floor, and push the floor with dust.

When using Normanke's sealing and curing agent, it is necessary to pay attention to 1 in the construction: the base layer is treated according to the different ground conditions, first use 50-150 mesh metal or resin grinding the ground roughly, clean the ground oil, cement pieces, white ash, etc., so that the ground is clean and reaches a certain flatness. If it has been used for many years and the surface has a honeycomb surface, it is recommended to use NORMAC water-based epoxy mortar self-leveling for surface repair before applying NORMAC-100 curing agent flooring.

2. Polishing and cleaning the ground. Use 150-300 mesh resin grinding pads to further polish the floor, and use a vacuum cleaner or other tools to thoroughly sweep the floor dust so that the floor pores can fully and evenly absorb the material. 3：

Liquid curing agent construction, spray or apply liquid hardener after the surface is dried. 4: Clean the base surface, about 2-5 hours after loading (25) When the ambient temperature is lower than 25, the material reaction time should be appropriately extended, and the resin grinding disc of about 300-500 mesh with a professional grinding machine should be used to polish the ground.

5: Preliminary polishing. For the initial polishing, use a resin grinding disc of about 500-800 mesh to continue grinding and cleaning the ground.

6: Fine polishing. After the initial excavation group light is completed, the resin grinding disc of more than 800-1000 mesh is used to continue the polishing, supplemented by the relevant polishing materials to refine the ground to judge the disadvantages, and complete the follow-up cleaning work.

7: Ground maintenance. After the ground is finished and dried, it is ready for use.

The above is about the construction methods and steps of sealing curing agent. If you are satisfied, remember to give a big thumbs up.

First, how to use:

1. Remove the cement blocks and other adherents on the concrete surface first, and clean them to prevent particles from being brought into the grinding disc and scratching the concrete surface.

2. The surface of the concrete is loose and the sand layer is polished clean with coarse grinding discs. The number of grinding discs depends on the ground conditions (30-100 meshes are acceptable).

3. Then use a fine grinding disc to grind the concrete surface to 300 mesh.

4. Clean the concrete surface again to confirm that no substance remains on the concrete surface.

2. Brief introduction:

The main components of concrete sealing curing agent are water and polysilicon compound, concrete sealing curing agent can completely penetrate into the concrete after treatment, through chemical reaction with calcium and magnesium plasma in concrete, hard crystalline substances are generated, so that the gel structure in the cement is increased and enhanced, and the components in the concrete are solidified into a dense whole, so that the gel void in the concrete becomes smaller, the pores of the concrete are blocked, and the density of the concrete is increased, so that the strength of the concrete floor, The hardness and wear resistance are greatly improved, and the functions of dustproof, hard, wear-resistant, and easy to clean are achieved. In this way, the compactness and hardness of the ground are improved, which hardens faster and has a better hardening effect, thus hardening the surface and reducing dust generation.

The construction of Deligu concrete sealing and curing agent is simple, and it is directly sprayed on the ground after a certain mixing with water, and the ground is naturally dried after being fully soaked for 4 hours, and the white substance remaining on the ground can be cleaned clearly and cleanly. After construction, the ground is dustproof, waterproof and oil-proof, and the effect is good.

It depends on what kind of concrete sealing curing agent you buy, if you buy acid coagulation sealing curing agent, the construction will be very troublesome, and it will be whitish, if you use lithium-based concrete sealing curing agent, such as Nalut lithium-based concrete sealing curing agent, the construction will be very simple, sometimes even with 500 grinding the ground, 500 polishing can make the gloss, hardness of the ground. If you don't believe me, you can give it a try.