100 help Frozen Throne runtime directx could not initialize, thanks

Obviously, there is a problem with the graphics card driver.

It's best not to use the driver wizard.,That thing doesn't work.,I used it once to back up the graphics card driver.,That's the problem after reinstalling the system and restoring the driver.。

It's better to use a lower version of your graphics card, and the compatibility of your computer is the most important thing.

ATI's graphics card is not very compatible with this, it is recommended that you do not use the driver wizard to update the driver, and use the driver life.

If it really doesn't work, hi call me, I'll help you find the reason.

over

Thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you.

You said it yourself, you didn't pretend, go find it yourself.

As for the free CD, it is invalid. That. You'd better reload Warcraft III.

Your xp can't be used.

It is recommended that you buy a jujumao system disk and install it.

jujumao is the best in the pirated system disk, because he is the most complete and up-to-date, sound card driver, graphics card driver, etc., and the compatibility is good.

Hope landlord!

dxdiag to see if everything is working properly in the display options, all enabled? Maybe the automatic update of the graphics card driver is incorrect... DirectX re** once reinstalled do not copy directly, the Frozen Throne version does not require a lot of CD-free tools.

Obviously, there is a problem with the graphics card driver.

There are three aspects that need to be examined.

Check whether the physical acceleration version is too low, and check whether the version is installed.

2.Check if the graphics card driver is standard compatible?

3.Check whether DirectDraw acceleration, Dierct3D acceleration, and AGP texture acceleration are enabled.

Resolved:3On the premise of making sure that there is no problem with the above two items, press the win+r key at the same time, pop up the run box, enter dxdiag, open the directx diagnostic tool, and follow my screenshot to check whether these 3 functions are enabled.

If it is still not enabled, the computer is too outdated and incompatible with the higher version of physical acceleration, and it is recommended to update the hardware.

Is your graphics card a set display or a separate display,If the integrated display may not support 3D acceleration,You can update the driver to try,First use software such as Master Lu to see the graphics card model,Go to the corresponding official website to find the latest driver to try,If it doesn't work, there's nothing you can do.,Go to a separate display。 If it's a separate display, it's better to update the driver first, but it doesn't work, then remove the driver, reseat it again, and reinstall it. Finally, pay attention to the version of DirectX.

Hope it works.

If your machine is not too old, you will have it in the motherboard, if you don't have it, go here, the current version is.

The version of directx is not enough, if your machine is not too old, you will have it in the motherboard, if you don't have it, go here, the current version is.

There are 2 possibilities:

Your version of DirectX is too low.

There is a problem with the graphics card driver.

Workaround: Install the latest DirectX version.

Update the graphics driver.

Go to the webpage and search for the latest version of DirectX to update or reinstall, if it doesn't work, it can only be said that it should be a problem with the computer configuration.

There are three main reasons for this error:

The version is too low. Acceleration, DiERCT3D acceleration, and AGP texture acceleration are not enabled;

3.The graphics driver is not up to date.

It should be that the version of directx is low, just go and update it.

It is recommended to reinstall the graphics card driver, and use the driver master to install it.

Many people have this problem when launching Warcraft. First, it prompted that Warcraft III could not initialize DirectX, and then prompted that the disc was not inserted. It really has nothing to do with discs at all. But it's really a problem with DirectX.

First of all, if you are using Windows XP or above (including XP), it will be automatically installed when you install the system, which is enough to support the operation of Warcraft III. Of course, it is not excluded that some people use the lite version of XP....#

So, if you don't have the above version installed, please install it first. I won't help you find the address anymore - -

Once installed, proceed in order: Start - Run - DXDIAG - Display.

Here you can see the status of the DirectX feature.

DirectDraw accelerates.

Direct3D acceleration.

AGP texture acceleration.

Here I need to say that AGP texture acceleration is more effective for users with less than 64MB of video memory, and it is irrelevant for users with more than 64MB. So it can be disabled.

DirectDraw and Direct3D Acceleration are required for Warcraft to function properly, so they must be enabled.

In this case, it is not for nothing that many people are in the situation shown in Figure 1. It may be that you are using some optimization software, or you have manually optimized DirectDraw and Direct3D Acceleration disabled.

So all you need to do is re-enable DirectDraw Acceleration and Direct3D Acceleration and that's it.

Note: You need to restart your computer after the change.

Exception: If you find that the three keys of DirectDraw Acceleration, Direct3D Acceleration, and AGP Texture Acceleration are all grayed out, then on the desktop, right-click -- Properties ---Settings -- Advanced -- Troubleshooting -- change from nothing to complete. Reference.

Handsome guy, I have the same problem as you, have you solved it, please tell me.

Don't install the latest driver, install the graphics card driver that matches your graphics card, I just deleted the latest one and replaced it with an old graphics card driver, and I successfully adopted it.

What are you initializing for?

Indicates that the individual has not encountered it.

Sorry to transfer from the Internet, hope it solves your problem

Recently, a friend often said that when opening Warcraft III, the error that Warcraft III could not initialize DirectX would pop up, and asked me how to solve it, especially many who have just installed Win7 system. Some people will blame the error on win7 system incompatibility,In fact, this is not the case,XP system will also have such an error,Below I will pop up Warcraft III can not initialize DirectX error causes and solutions summarized for your reference。

There are three main reasons for this error:

The version is too low, and you need or higher to run Warcraft; (Win7 system can be ignored).

Acceleration, DiERCT3D acceleration, and AGP texture acceleration are not enabled;

3.The graphics driver is not up to date.

To determine which cause is caused, you can: Run: DXDIAG, open the DirectX diagnostic tool, check the DirectX version in the System tab, and then check if the three accelerations are enabled in the Display tab.

Run: Open Device Manager to see if the graphics driver is up to date, or use a software similar to Driver Life.

Step Method. The DirectX version is too low, and you need or higher to run Warcraft: ** and install the new version of DirectX, because the Win7 system comes with DirectX11, so you don't need to consider the problem that the DirectX version is too low, and the Win7 system can ignore this problem; DirectDraw acceleration, Dierct3D acceleration, and AGP texture acceleration are not enabled

XP system runs: DXDIAG, as shown in Figure 2, turn on the three accelerations, or right-click on the desktop - Properties - Settings - Advanced - Troubleshooting - turn on the hardware acceleration to complete, and then OK! Because the win7 system default hardware acceleration is fully on, but when we open the directx diagnostic tool, we will find that the three acceleration is not turned on, and there is no option to turn on the acceleration behind the three accelerations, and what's worse is that the win7 desktop right-click has no attributes, and it can't be opened through the attribute settings, this problem has been my headache for a long time, but finally I found a way to turn on the three acceleration macro touches, see 3 for the solution; The graphics driver is not up to date.

You can use tools such as driver life or driver wizard to talk about automatically updating the graphics card driver,Win7The three accelerations of the system are also turned on by updating the graphics card driver,Even the latest drivers are also updated,So that when you open the directx diagnostic tool, you will find that the three accelerations have been turned on,Running Warcraft III will no longer have annoying error prompts。

Precautions: At this point, the error message that Warcraft III cannot initialize DirectX can be perfectly solved, and this method is also suitable for other games with similar error prompts.

Well, if you want to read the full text, you can see the full text by searching for "Warcraft Frozen Throne D" in your experience

Embarrassed? Transferred from the Internet, I hope to be able to solve your problem with Mountain Oaks?

There are always friends who will pop up the "Warcraft III Warcraft III cannot initialize DirectX error" and ask me how to solve the problem, especially many who have just installed Win7 system. Some people will mistakenly blame the win7 system for not being compatible with the XP system, and there are also mistakes, in fact, this is not the case, I will pop up the causes and solutions of the "Warcraft III" can not initialize the DirectX error, summarize the problem, for your reference.

There are three reasons for this error

The version is too low, running Warcraft, requires or higher; (Win7 system is negligible).

2。DirectDraw acceleration, dierct3d acceleration agp texture acceleration 3 is not enabled;

3。The graphics driver is not up to date.

To determine what is causing this: Run the input dxdiag, open the DirectX diagnostic tool to see the [System] tab of the DirectX version, and then in the [Display? ] tab to see that the three accelerations are.

Run: Enter to open Device Manager, see that the graphics driver is up to date, and use the software to view.

Step The method is similar to driving life. The DirectX version is too low, and it takes or higher to run Warcraft: ** and install the new version of DirectX, DirectX11 is coming, because of the Win7 system, so we don't consider the problem that the DirectX version is too low, the Win7 system can ignore this problem; DirectDraw Acceleration, Dierct3D Acceleration, AGP Texture Acceleration, III:

Run not enabled on xp system: Enter dx??diag, as shown in Figure 2 to open the three accelerations, or right-click on the desktop - Properties - Settings - Advanced - Troubleshooting - Hardware acceleration is open, and then OK!

Win7 system default hardware acceleration is fully turned on, but open the DirectX diagnostic tool, we will find three acceleration on, and behind the three acceleration, there is no acceleration option turned on, the more terrible win7 desktop right-click attribute is also set by the hotel to open This problem is still a headache for a long time, but finally found an open acceleration solution, see 3, the graphics driver is not to: drive tools, such as life or drive wizard automatically update the graphics drive, Win7 system three accelerated update of the graphics driver opened, even if it is not the latest driver update once, and then open the DirectX diagnostic tool, you will find that the three accelerations have been turned on, running Warcraft III nasty error happens again.

Please note that this Warcraft III cannot initialize directx error can be the perfect solution too? The same applies to the town as it does to other similar bug games.