-
Hello, in this case, it can be turned on after a while, because at this time your operation is too frequent, which will cause the phone to completely crash, after he shuts down, it will be automatically repaired after a while, so that it can be turned on.
-
The mobile phone can not be turned on due to frequent switching, and it should be able to be turned on after a period of time, because the mobile phone should not always be turned on and turned off, which will affect the mobile phone, so it is best to turn it on after a period of time.
-
If you try again after a while, it might turn on.
-
The phone can't be turned on, you can wait for a while and try again, if it doesn't turn on, it may be that the keys are out of order or there is no power.
-
Yes, because it refers to the fact that there is a problem with such a system inside, and its CPU is okay.
-
Hello, your phone should be broken, it can't be turned on.
The mobile phone is an electronic product, so if the mobile phone is broken, it will not return to normal, and you need to go to a regular mobile phone store to repair it.
-
If you can't turn on the machine and leave it for a while, it's likely that the battery is damaged and needs to be replaced.
-
The phone cannot be turned on due to frequent switching, it is likely that the battery is dead, and it will not be able to turn on, of course, it is also possible that the power button is broken by you.
-
The phone is frequently switched on and off, causing it to fail to turn on. Try again in five minutes and it should be fine. Because the machine has entered a state of self-protection.
-
Then you wait for it to cool down, it should be able to turn on, charge the electricity first, if it still can't be turned on, you may have to take it to repair.
-
The mobile phone cannot be turned on due to frequent switching, can it be turned on after a period of time? You just have to wait a while and try to see if the system can be turned on.
-
I believe that all of you know that if you install too many apps (apps), resulting in an overload on your phone, and run too much software at the same time, a reboot will occur. 3. Mobile phone software conflict. If there is a conflict between some of the software installed on the phone, the system will automatically restart.
4. Mobile phone battery contact problem. If the phone's battery is not in good contact, it may trigger a situation where the phone restarts. You can take it to a repair shop to see if you need to replace the battery, or if you need to change the cable.
5. SIM card problem. Problems such as SIM card errors can affect the operation of the phone, causing the phone to restart. 6. Restore the factory setting method.
If you want to be more direct, you can try the following operation: Step 1: Open the phone settings, pull down to find and tap [Reset] to enter the phone's unlock passwordStep 2:
Click [Factory Reset] and click [Confirm Reset]. 7. Shuangqing recovery settings. In addition, you can also try Shuangqing Wipe to solve the problem of phone restart.
Generally, Android phones operate like this: Step 1: Turn off the phone, turn it on again and press the power button 5 times in a row after vibrating.
Step 2: When the phone appears on the boot screen, let it go, and the phone enters the recovery menu interface. Step 3:
Use the [Volume+Key] and [Volume-Key] to move the operation, and use the Power button to select [Factory Reset]. Step 4: Wait for the phone to perform a factory reset, after the completion of the phone will stay in the recovery interface, click "Reboot System".
Tips: Before the phone is restored to factory settings or double cleared, please back up the personal data and turn off "Find My Phone", otherwise it may cause data loss and cannot activate the phone after resetting. The above is [What's the matter with the phone keeps restarting the loop?]
The mobile phone automatically restarts to solve the problem, if you can't detect these problems, you can try to brush the machine with one click, and it is very convenient to flash the machine with one click, helping you save a lot of troublesome steps.
-
Cover the quilt and charge it for 30 minutes, but it still can't be sent directly to the after-sales service.
-
The reasons why the phone can't be turned on for a period of time are as follows:
1. The problem of the mobile phone battery, if it is not an all-in-one machine, first remove the battery and charge it with a universal charge for 15 minutes, and then turn on the mobile phone again.
2. Software problem, see if the phone can enter recovery. How to enter recovery: In the shutdown state, first press and hold the "volume up button" and then press and hold the "shutdown button", and let go when the boot screen appears, you can enter recovery.
4. Problems with the motherboard. It is recommended to go to the after-sales center for inspection and maintenance.
-
1. The problem of mobile phone battery, if it is not an all-in-one machine, remove the battery first and use 10,000.
-
If you don't use it for a long time, the points in the battery may not be enough, and you need to charge and charge it for a longer time before you can turn it on.
-
When the battery is out, charge the phone first1
Reasons why iPhone won't turn on and how to fix it:
1. There is no electricity. If you use up all the battery power, the charge needs to be charged to 5% before it can be turned on normally. So in this case, please let the phone charge for a while before trying to turn it on. >>>More
The main problems are as follows:
ALT+F4 patent, copy is shameful of human content]. >>>More
There are many reasons why the notebook cannot be turned on, including the corresponding fault phenomenon, and we can judge different fault causes according to different fault phenomena, so as to find the corresponding solution. >>>More
The Apple phone can't be turned on, check whether the power is completely exhausted, you can charge it for more than ten minutes and then turn it on.
As long as you can enter the REC, there is no big problem, you can save it, you go to the Internet to find your phone's ROM card swipe, copy it to the SD card and swipe it.