What should I do if my iPhone won t turn on?

The Apple phone can't be turned on, check whether the power is completely exhausted, you can charge it for more than ten minutes and then turn it on.

The battery is used up, and under normal circumstances, it may be due to the battery running out of power, which makes it impossible to turn on. Hardware failure. After plugging in the data cable, the device does not respond at all, which mostly occurs when the device has a hardware failure, and it is common to see water ingress between the devices, because the iPhone cannot remove the battery, it will always be powered on after water ingress.

iPhone can't turn on solution: Press and hold the home button and the power off button at the same time for 10 seconds (if it fails to restart), immediately release and then press and hold the plus button, only until the phone is turned on.

2.Encounter the "white apple problem" (that is, when the phone is turned on, the white apple appears and then freezes).

Solution: When the "white apple problem" occurs, the system has entered the DUF mode, and the following methods are used.

1) Open the software iTunes on the computer, link the phone with the computer, and turn it off.

2) Press and hold the power button until the Apple logo appears on the screen (don't let go).

3) Press and hold the power button at the same time, and then press and hold the home button until the Apple logo disappears.

4) Release the boot button at this time (do not release the home button), then the computer will prompt you to enter recovery mode.

5) iTunes prompts recovery mode, hold down shift at this time, and then select the corresponding firmware to recover.

Answer: Hello, 1. It may be that the mobile phone is out of battery, resulting in the mobile phone not being able to turn on. Solution: Use the original data cable and charger to charge your iPhone, and check if your iPhone is responsive after a period of time.

2. If you are sure that the current mobile phone has enough power, but it still can't be turned on normally, there may be a problem with the mobile phone software or system. Solution: Force restart the phone, press the volume plus or minus keys of the phone once, and then press and hold the power button again until the Apple logo appears on the phone and then let go.

3. It may be that the system of the mobile phone has crashed, resulting in the mobile phone not being able to turn on. Workaround: Connect your phone to iTunes and fix it, let a professional do it for overhaul if necessary.

4. Check whether the iPhone has physical damage, such as bending deformation or water ingress and other accidents. Workaround:

If this is the case, it is recommended to go to the local Apple after-sales service for processing.

Method 1: Press and hold the home and power buttons at the same time for 10 seconds, if you see the apple is too slow, you have to start again, then release the power button and continue to press and hold home for 5 seconds, if you see connect to iTunes, it is a failure, and you have to start again. If the screen does not light up after these 2 steps, it will enter DFU mode, and then you can use iTunes or other flashing software to restore or re-flash the computer.

Method 2: If method 1 is invalid, you can try to connect to the computer, the first step is to use the "restart" function in PP assistant, itools and other tools, if it is successful, congratulations, if it is not successful, you can proceed to the next step.

Method 3: Flash! You can restore the firmware through an assistant or an official one.

Method 4: First of all, you can call Apple Technology**, and after dialing, go directly to the topic and ask what should I do if the iphone6 plus can't turn on? Follow the staff's instructions to fix your phone.

Force restart, charge, or go to the after-sales service for inspection and repair.

Method 1: Force a restart.

1.Try holding the "Power and Home Screen" buttons on your phone at the same time for at least 10 seconds.

2.If the force restart is successful, you can see an Apple logo on the screen.

3.After the reboot is successful, you can use the phone normally.

Method 2: Charging.

1.It may be because the phone is out of battery, causing it to turn off automatically. When this happens, plug your Apple iPhone into a power charger first.

2.A battery icon will appear on the screen.

3.After the Apple mobile phone is connected to the charging power, if there is still no response on the screen, then press the first method to operate, and press the "Power + Home Screen" button at the same time, and hold it for more than 10 seconds.

3. Hardware failure: If the above two methods do not work, it may be a hardware failure of the Apple mobile phone, and it is recommended to send the mobile phone for repair to an Apple authorized after-sales service store for testing.

The reason why the iPhone suddenly went black:

This may be due to an internal conflict in the software you have installed. In serious cases, the screen will restart and so on. It is also possible that the mobile phone has been used for a long time and the heat is not dissipated in time.

As long as you press and hold the power button (power) + exit button (home) at the same time for about 10 years, it will force the shutdown, and then restart it. However, it is generally not recommended to force a shutdown. There is an impact on mobile phones.

How to deal with the iPhone not booting normally:

1. Check whether the iPhone has physical damage, such as: bending deformation or water ingress and other accidents;

2. Use the original data cable and charger to charge the iPhone, check whether the iPhone is responsive, and the battery may not turn on if the battery is insufficient;

3. Force restart your iPhone;

4. If there is still no response or cannot be turned on normally after the above operations, it is recommended to go to the local Apple official or authorized after-sales service.