My computer has been reinstalled, do I need a driver for my recorder?

The recorder does not need a driver.

There are four possibilities for you.

1. There is a problem with your nero software, you can reinstall the new nero, now it is 2. your system does not correctly recognize the ide channel Go to the device manager to take a look, if there is no recorder, then you should reinstall the motherboard driver.

3. Check whether there is a problem with the data cable and power cord of the recorder.

4. If it doesn't work, then it may be a problem with the recorder itself, and it needs to be repaired.

The burner does not need a driver, and when choosing a burning device, be careful not to select the Nero Image Drive, otherwise you will get a disc image file.

You don't need a driver, but when you use it, you need to install burning software, Nero is the best burning software!! It's easy!

The master is right,Burner - Select the burner option,There will be an image recorder by default,This is virtual,You should choose the one that corresponds to your recorder brand name (for example, the ASUS recorder name is ASUS,BenQ is BenQ) You can burn after choosing the correct one。

He can install it himself, you don't need to install the driver.

However, it is best to install professional software for burning, and the burning function that comes with WinXP is too simple.

You don't need a CD-ROM drive or recorder anymore.

Now it is generally used to install the system on a USB disk, which is faster and more convenient.

Look at what you want, just install it.,That kind of dispensable.,You can use a USB flash drive to install the system without an optical drive.。

Now I basically don't use a CD-ROM drive, and I use a USB flash drive to start and install the system.

No, the system can be installed with a U disk to drive the next driver of the network.

1. Of course, there must be a burning software + recorder, and one of the two is indispensable.

2. The laser emitted by the ordinary CD-ROM laser can only read the data on the disc, and cannot emit a specific wavelength laser to react with the chemical dyes on the burning disc to achieve data recording.

If there is an optical drive, disassemble the optical drive, install the recorder in the position of the original optical drive, and plug in the cable according to the original installation.

1. To reinstall the system with a CD, you need to have two basic hardware, one is the system CD, and the other is the CD-ROM drive. These two things are indispensable. So, first of all, there should be a system CD, and an optical drive.

Nowadays, there are many laptops that no optical drive, so if the computer does not have an optical drive, you can't use the disc to reinstall the system.

2. Turn on the optical drive on the computer case, press the open button directly above, after opening, put in the disc, and then close the optical drive. The computer will automatically restart.

3. Before the computer restarts, you must enter the BIOS first, and then set the boot method. That is, you need to boot the system from the disc in order to install the system. Different computers have different ways to enter the BIOS, and the general way is to press the delete key on the computer keyboard.

Of course, there are many motherboards that enter the BIOS in a variety of ways, some press the ESC key, some press F12, etc., how to enter the BIOS needs to refer to the manual or try one by one. Be careful to keep pressing before turning on the machine.

4. After entering the BIOS, you have to select the startup item, if you are not familiar with English, you can find such a word, that is, boot, as long as the option of this word appears, generally speaking, the boot item is selected. Find this option, and then look for the first boot option, which is the device that boots first. Once you've found it, select the CD-ROM option, which is the optical drive, and if you want to boot from the disc, you have to choose this option.

5. After setting, save the BIOS settings, press the F10 key on the keyboard, and a saved confirmation dialog will appear. Click OK and the system will restart again.

6,When the system restarts again,It will enter from the disc,At this time, if the system disk works,There will be a system installation interface,Just click this start installation button,You can start installing the operating system,The whole process is fully automatic,No need for any manual operation,So,Just look at it。

Clause.

1. Set up the disc driver:

1. After the machine starts, first press the del button to enter the BIOS (press F2 for the notebook or see the motherboard instructions).

2. Select Advanced BIOS Features by using the arrow keys on your keyboard.

3. Press Enter to enter the BIOS setting interface.

4. Use the arrow keys to select the first boot device or (1st boot device) Enter.

5. Use the up and down arrow keys to select the cdrom.

6. Press ESC to return to the BIOS settings interface. Press F10.

7. Press the 'Y' key and press Enter to restart the computer.

It should be noted that due to the different BIOS, the setting buttons may also be different after entering the BIOS. If it is an AMI BIOS, press the right arrow key after entering the BIOS, the fourth option, then select the same option like First Boot Device, then save the changes to exit. If it is a notebook, you can press F2 to enter the BIOS, and the settings behind are similar.

Second, (1) when restarting the computer into the CD, the original system, there is a row of English press anykey to boot from cdrom on the screen, immediately enter, you can operate according to the requirements.

2) When you restart the computer, put in the disc, ghost system, the interface will automatically appear, select *** to restore to the first partition (if you want to repartition, choose to enter the PE system), the things you face are simpler, fully automatic, until the system installation is completed.

Today's burning disks are generally one-click ghost. Just put the plate in it.

Ghost from computer companies

XP system, can be installed directly from the Internet**, can not be directly installed by the available hard disk installer or virtual optical drive to install Linghuai Sakura. But the premise is that your machine can open the system, and if you can't open it from the hard disk, you still have to engrave the disk, install it from the optical drive, or start it from the U disk and install it with the U disk.

2. If there is a built-in installer, it can be directly installed on the C disk.

XP system folder, open it and find the "image installer exe" can also be used), double-click and then use the winrar compression tool software to start decompressing (no winrar compression tool software can be used from the Internet**).

2. After decompression, ask whether to install, select "Yes", and copy.

3. After copying, ask if you want to restart the installation, and select "Yes".

4. After restarting, enter the ghoft copy and install.

5. Auto restart, enter the "computer package deployment program (driver selection, decompression graphics card, sound card driver)".

6. Automatically enter the XP installer, please wait....(Takes longer).

7. Auto-entering: "Executing the last task (open section installation start project menu, register components, save settings.

Delete used temporary files)".

8. Automatically reboot into the desktop, manually change the resolution and remove or retain the integrated driver to complete the installation.

9. After the system installation is completed, delete the GHSOF in the D disk

LNG folder as it takes up about 700MB of space.

b) Extract documents.

1. Double-click the hard disk installer folder, double-click the hard disk installer in the window that opens, and then double-click the hard disk installer to enter the welcome interface, click "Agree" to start the hard disk installer software.

2. In the "1 Select the ISO image directory to be installed" interface, click the "Browse" button, select the disk partition with the image file in the "Search Range" drop-down list, specify the image system file to be installed in the list area, the system will automatically enter the file name into the text box, click "Open" to return to the directory interface, and display the storage path of the image file in the "ISO Image Path" text box under the "ISO Image Path", click Next.

3. Enter the name of the image file in the "2 Boot Menu Load Name" text box and click Next.

4. Automatically decompress and copy to drive D, ask if you want to restart, and select "Restart now".

5. Auto restart, open the D drive, and there is an extra folder named Win, which is the system file you just extracted.

c) Installation. 1. Find the WIN folder just extracted from the D disk, open it and find the "image installer exe", double click it and start to decompress.

2. The following steps are 2-9 in the same as above in the second place.

GhostXP SP3 2009 Chinese New Year Special Edition (NTFS).

Please refer to the mountain touch here sail luck.

This is the installation of the version beam.