What should I pay attention to in the selection of tiles? What are the precautions for choosing tile

Knock on it. The left hand is held up from the bottom, and the right hand taps the front, and the sound is clear to indicate high density and good sintering, and the sound is dull to indicate that there are cracks inside.

Take a test. Prepare 1 cup of water droplets on the back of the tile, if the water droplets are quickly absorbed, it means that the water absorption rate of the tile is high.

Measure a measure. Porcelain tiles with high hardness must be processed and trimmed, chamfered, etc., in order to accurately match the wall and ground.

Take a look. Hold the tile in your left hand and use your right eye to observe the flatness of the surface of the tile, the verticality of the sides, and the convex or concave condition.

1. Drop a few drops of tea juice or water on the back of the tile, wait for a few minutes, depending on the degree of inhalation and diffusion of the water droplets, the quality is good if it does not absorb water or has a low water absorption rate.

2. Knock on the tile to listen to whether the sound is crisp, the more brittle the sound, the higher the porcelain, the higher the density and the better the hardness.

3. Scratch the tile with a sharp object to see if there are scratches, if there are scratches, it means that the surface hardness is not enough, and the surface of the glaze is polished, and the brick surface will not be cleaned.

4. If the color and chromaticity of the tile are clear and natural, it means that the porcelain degree is high, the chromaticity is not clear, and the porcelain degree is low.

5. When purchasing, observe whether there are pinholes on the surface with the naked eye within one meter, if there is, it means that the glaze is not completely integrated, and it is easy to accumulate dirt.

6. Observation of warpage: whether the side of the tile is straight with the naked eye, if the warping situation is serious, it will affect the firmness of the tile in the future.

7. Check the square of the tiles: put the four bricks flat on the ground, change the combined edge arbitrarily to see whether the cross and gap in the middle are uniform, 8. Check the flatness: turn any two bricks opposite each other and rotate one of them; See if it can rotate, if it can rotate, it means that the surface of the brick is uneven.

Ask the owner of the brand store and you will know.

There is no certain standard. It's up to your liking, but if you're talking about quality, I think you should pay attention to the following. 1.

Water absorption. If the water absorption rate is too high, it will be more susceptible to moisture and the wear resistance will be reduced. To do this, just put the tiles in water and boil them for at least half an hour.

Then put it on the scale to know (our factory QC is tested like this)2. Strength and hardness. You can feel this by trying it yourself (there are generally special instruments in the factory.)

But it's hard for individuals to measure it accurately). There is no certain standard.

The principle of purchasing tiles is: one look, two listens, three drops of water, and four feet. First, look at the appearance.

The color of the tile should be uniform, the surface finish and flatness should be good, the surrounding rules should be regular, the pattern is complete, and four or five pieces should be extracted from a box to see if there are defects such as color difference, deformation, lack of edges and corners. 2. Listen to the sound. Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality.

You can also use the thumb, index finger and middle finger of the left hand to clip the corner of the tile, hang down easily, and tap the middle and lower part of the tile with the index finger of the right hand. 3. Drip test. You can drop water on the back of the tile to see how fast the water soaks after it spreads, generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior.

Fourth, the measurement. The higher the accuracy of the side length of the tile, the better the effect after paving, and buying high-quality tiles is not only easy to construct, but also can save man-hours and accessories. Use a tape measure to measure whether there is a difference in the size of each tile, and the high accuracy is the top grade.

In addition, observe its hardness, ceramic tiles with good hardness, strong toughness, not easy to break and rot as the top quality. The edges and corners of the tile fragments are scratched on each other, and the broken fragments are inspected to see whether the broken parts are fine or loose, whether they are hard, brittle or soft, whether they leave scratches, or scattered powder. 】

Be sure to pay attention to the anti-fouling ability of ceramic tiles, which is a very important point, because it is likely to be very convenient when cleaning in the future, and you must choose a strong anti-staining ability when choosing.

Don't choose pure white, or even don't choose a solid color, the solid color of the tile is either too dirty, or too dirty, off-white or comprehensive color will be much better.

The main thing to choose ceramic tiles is to pay attention to its quality, reputation, color and quality. Like Jinzun Ceramic Tile is a high-quality, colorful, suitable production, sales as one of the large-scale modern production enterprises. I bought the tiles at his house

Arrange the body force reasonably, try to avoid excessive force on the waist, pay attention to the gentle release, and avoid overwhelming the hands.

<> "What should I pay attention to when choosing tiles?

1. Glazed tiles.

Generally speaking, glazed tiles are coated with a layer of glaze on the surface of the floor tiles, so as to make the surface of the floor tiles smoother, more gorgeous, and easy to clean.

In addition, it also has the characteristics of low water absorption and strong anti-fouling cleaning effect, so it is widely used in home life and production.

Second, the whole body brick.

Contrary to glazed tiles, the surface of the whole body brick does not have a layer of glaze, and the surface of the floor tile is not so smooth, and the anti-slip and wear-resistant properties are relatively strong, which is very suitable for use in some non-slip places, such as some public places and places with the elderly and children, which are very good choices for floor tiles.

Third, the lack of family books and polished tiles.

As the name suggests, the surface of the polished tile has been polished, which has the characteristics of wear resistance and strong hardness, and is also very widely used in home production and life, but in order to ensure the quality of the polished brick, it is generally necessary to choose a big brand of polished brick.

Fourth, vitrified bricks.

Among all the types of bricks, vitrified bricks are the hardest type of bricks, which have the characteristics of strong hardness, waterproof and moisture-proof, easy to clean, etc., while the decoration effect is good, and it is deeply loved by many consumers.

5. Marble bricks.

Marble bricks are relatively cheap, wear resistance is also very good, generally speaking, it is widely used on stairs, but the color is a little monotonous, not easy to match, not suitable for some families with high requirements for home decoration.

Sixth, matte bricks.

Matte brick is a type of brick with low brightness, which has the characteristics of wear resistance and high hardness, and is also a type of brick loved by many consumers.

7. Printed bricks.

There are a variety of patterns on the surface of the floor tiles, which can meet the needs of different people, and a variety of patterns can increase the layering of the whole home life, which is also a very good choice.

Note: 1. Different spaces have different requirements for bricks, and it is necessary to pay attention to the selection of bricks in special areas. For example, the floor tiles of the kitchen and the floor tiles of the bathroom should be glazed tiles, which can effectively prevent water, oil, slip and paint.

2. After calculating the number of tiles needed, try to buy a few more within the range, because it is likely that the first batch of floor tiles and the next batch of floor tiles will be different in appearance, resulting in different appearances.

3. When receiving the goods, be sure to check the edges and corners of the bricks, whether there are bumps and bumps, so that the merchant can compensate.