How to choose a good tile? How to choose the best tiles?

How to choose good tiles for decoration, teach you a little trick to buy good tiles.

How to choose tiles? Star Awareness Project

When you go to a physical store to buy bricks, almost every store has tools to inspect bricks, and you have to ask the clerk if there are any gadgets I want to inspect bricks. What are the common gadgets in life?

One: magnifying glass.

Magnifying glass to inspect the bricks.

Usage: Check the density and whiteness of bricks. Use a magnifying glass to look at the side of the brick, check the texture of the brick, and look at the whiteness of the brick, the whiter it is, the better the quality (not the "super white" kind, it is "gray white").

High density, fine texture, are pressed by more than 7200 tons of presses, more than 1200 high temperature firing, firing time of 70-90 minutes, the service life of bricks is longer.

Two: the key blade heels.

Key. Here I only put the key **, because everyone has it, the most convenient. Using a key, a blade or a high-heeled shoe to scratch on the brick surface of the brick is to test the wear resistance of the brick, leaving no traces and strong wear resistance. Whether the wear resistance is strong or not will affect the service life of the brick.

Three: ruler. <>

Ruler. Use a ruler to measure the side of the brick and check the thickness of the brick. (800x800 floor tiles) thickness up to 11mm (error 1-2mm), high density, thickness enough, indicating the quality of the bricks. There is also diagonal measurement (with a tape measure) to see if the brick is square.

Four: oil-based pen.

Oil-based pen. Draw circles on the surface of the brick with an oil-based pen, and then wipe it with a wet towel when the notes are dry, and check the stain resistance of the brick.

Five: a glass of water.

A glass of water. It is used to check the slip resistance of ceramic tiles. Walk back and forth on the brick surface with your shoes on to see if you feel slippery. Then sprinkle water on the brick and walk back and forth, there is no slippery feeling, indicating that the brick looks very bright, but the anti-slip effect is very good.

One look: whether the tile is smooth or not.

First of all, it is necessary to see whether the surface of the tile is smooth, whether there are impurities, or whether it is mixed with things of different colors. The second is to see whether it is smooth around it, whether there is a chamfer phenomenon, if there are impurities or chamfers, it means that the tile is not very good.

Second knock: Listen to the crisp sound.

Hit the corner of the tile vertically on the ground, gently knock on the surface of the tile, if the surface of the tile sounds very crisp, it means that the tile is fired to a very good degree, and the quality and water absorption rate are relatively good.

Three drops of water: test the water absorption.

Gently drip some water on the back of the tile and see how much the water droplets spread. If there is basically no diffusion of water droplets, it means that the degree of vitrification of the brick is good, the water absorption rate is low, and its wear resistance and anti-fouling degree will be relatively better.

Four grinding: test the wear resistance.

Scratch on the brick surface with a sharp object, if there are obvious scratches on the brick surface in the process of scratching, it means that the wear resistance of the brick is not high, if you scratch hard, the brick surface is still smooth as new, it means that the wear resistance of the brick is very good.

Five strokes: test the anti-fouling performance.

Find an oil-based pen or ink and other things, leave scratches on the brick surface, and wipe it gently with relatively clean toilet paper and rags after five to ten minutes.

Six contrasts: the flatness of the bricks.

Generally, the flatness of bricks is measured with vernier calipers, but in daily life, you can put two bricks together, stand them up, and see if there are gaps between the two bricks, if there are obvious gaps, it means that the flatness of the bricks is not very good. Tiles with high flatness, dirt resistance and good gloss will be relatively guaranteed in terms of quality, and they can be used with confidence in the future.

Step 1: Look at the appearance.

First of all, when we go to choose tiles, the most intuitive way to distinguish the good and bad is to look at its appearance, the appearance of the tile color is uniform and complete, and the color is clear and beautiful. And the surface is flat and there is no concave place, and the edge is also more regular, so the tile is better, we must pay attention to it when buying.

Step 2: Listen to the sound.

If you want to choose a good quality tile, you must also learn to recognize the sound made by the tile. You can use a hard object such as a small hammer to hit the tile, if the sound is more crisp, it proves that ***, if the sound is dull and muddy, then such a tile should not be chosen.

No. 3: Drip beads.

If you want to buy home ceramic tiles are more durable, then we have to check the water absorption rate of the tile, you can drop a few drops of water droplets on the back of the tile, if the water droplets are dispersed and the absorption rate is particularly slow, then it proves that the water seepage rate of the tile is not high, and the density of the tile is compact, so that the tile can be bought, otherwise do not buy.

Step 4: Hardness detection.

The hardness of the tile also determines the quality of the tile, and it is definitely that the harder the tile, the longer the service life will be. The method of detection is that we can use the sample of two tiles, let the water chestnut attack each other, and then observe whether the tile is scratched or powder, the hardness of the powder is relatively low, this kind of don't buy.

No. 5: Measure the length of the edge.

When buying tiles, we must bring a ruler to measure the side length of the floor tiles, the higher the accuracy, the better the effect of paving, and the more beautiful it will be.

Like the color of the tile, antique brick is also a good choice, Smick's antique brick is super cost-effective. Unified understanding.

I probably understood, I really started to have no clue, I read Xiaohongshu, chose the Smik Star Stone, and pretended to feel like microcement. If you still don't understand, you can unify to know.

In almost all home decoration, ceramic tiles will be used, and it can be said that ceramic tiles are the necessities of home decoration. So, how to choose tiles? Please read below:

1. Look at the product packaging.

Now the tiles sold on the market are packaged in cartons, and the production name and product name should be printed on the packaging box. Trademarks, specifications, sizes, levels, shades, numbers, etc. Some are also printed with the logo of ISO9000 quality system certification.

The packaging box should also be placed with a product certificate. When purchasing ceramic tiles, be sure to choose products with complete and clear logos, especially pay attention to whether the selected tiles are consistent with the specifications and color numbers marked on the packaging box.

2. Look at the appearance of the product.

When consumers buy ceramic tiles, they can randomly check a few tiles from the packaging box to see if there are any of the following defects on the surface of the product: lack of glaze, spots, cracks, bumps, glaze bubbles, stripping, ripples, etc. Generally, the distance from the porcelain is 3m visual inspection, the defect is not obvious, and does not affect the use of qualified products.

Each tile has a product logo on the back, and there is no obvious drop on the side and back that hinders the adhesion of the glaze and other effects on the use.

3. Look at the color difference.

Because the number of tiles needed in the decoration is usually relatively large, if the tiles have obvious color difference, it will affect the decoration effect, so consumers should sample and compare all packaged products when purchasing tiles, observe the changes in color difference, and the color difference can not be selected. You should also pay attention to whether the color of each box of tiles is consistent, and whether there is any color difference.

4. Listen to the sound of tiles.

To discern the quality of the tiles, in addition to looking, but also listening. When consumers buy tiles, they can use the method of tapping to identify the inherent bad of tiles from the sound.

5. Look at the size.

Finally, consumers also have to check the tiles one by one, the size error is greater than the flatness of the product, not only will increase the difficulty of construction, but also the effect after decoration is also poor, can not be used in the project.

If you have time, you can go to Kunming** online to learn about it, and there are some building materials activities in the near future.

Nowadays, all over the world, automated production technology is used, and human hands are only used to operate equipment. As in the past, ceramic tiles are used for decoration both indoors and outdoors.

How to choose tiles? Star Awareness Project

How to choose tiles? Star Awareness Project

How to choose good tiles for decoration, teach you a little trick to buy good tiles.