-
Anonymous users2024-02-08The system software conflicts, just switch it on and off.
-
Anonymous users2024-02-07The whitening of the computer screen is a color cast of the display. The remediation actions are as follows:
1. First click on "Control Panel".
2. Then click "Color Management".
3. Click "Advanced".
4. Click "Calibrate Display".
5. Click "Next".
-
Anonymous users2024-02-061. There is a problem with the self-test of the memory or motherboard, which causes the machine to fail to start smoothly, and the internal files must be loaded when the computer starts, and if there is a problem with the self-check, these files cannot be loaded.
2. If the capacitor of the motherboard is bulging or bursting, if it is bulging, it means that there is a problem with the motherboard, so that the motherboard itself cannot load the internal files, and the white state appears.
3. The motherboard battery is dead, there is a thumb-sized button battery in the motherboard, this battery is out of power, which will make the motherboard lack the ability to save resources and load files, and it will also cause the screen to be white.
4. If there is a problem with the display, the display voltage is insufficient or too high, and the display itself will also have good questions.
5. If there is a fault in the memory, there should be an alarm sound. If it's not the memory reason, change to a normal CPU and re-detect the boot file. If the black screen still appears, you can only change the motherboard, and the problem should also appear on the motherboard, so you can eliminate it again and again until you find the cause of the failure.
6. If you can't find the problem, then it may be a system tolerance problem, and you can redo the system processing.
There are many possibilities for the white screen of the display, and it is best to go to a professional repair shop for repair, otherwise it is generally difficult to find out the problem yourself, and there is no way to repair it if you find it.
-
Anonymous users2024-02-05Summary. Why is there a little white on the edge of the screen when the computer is turned on: The reasons why the screen is a little white when the computer is turned on are as follows:
1.If white patches are shown all the time. Then there is a dead pixel in the LCD screen of the display.
The LCD screen is of poor quality and has flaws. 2.Caused by magnetic field, the display has a degaussing key, press to demagnetize.
3.Disconnect the power supply for more than 60 minutes before powering on.
Why is there a little white on the edge of the screen when the computer is turned on: The reasons why there will be a little white on the edge of the screen when the computer is turned on are as follows:1
If white patches are shown all the time. Then there is a dead pixel in the LCD screen of the display. The LCD screen is of poor quality and has flaws.
2.Caused by magnetic field, the display has a degaussing key, press to demagnetize. 3.
Disconnect the power supply for more than 60 minutes before powering on.
That's it. Some are not clear, and 90% of them are display failures.
If it keeps showing the same. Then there is a dead pixel in the LCD screen of the display.
Can you fix this.
It can be repaired, but the value of repair is not high, and repairing it is more expensive than buying a new one.
The computer was bought in less than two weeks.
Nowadays, there are a lot of second- and third-line displays around 24-inch 330.
The computer can not be bought for two weeks, looking for after-sales. Also under warranty. Maybe you can change it.
Yes. I'm going to customer service. Well.
-
Anonymous users2024-02-04<> click Enter a description.
In the personalization options settings, select the Related Settings - High Contrast Settings option on the left.
<> click Enter a description.
In the High Contrast Settings option, in the navigation bar on the left, select Color Filter to enter the Color Filter option.
<> click Enter a description.
Then, as shown in the figure, if the color filter option is turned on, here you only need to turn off the color filter to restore the computer color to normal. This option can be set to shortcut keys to turn on or off.
<> click Enter a description.
<> click Enter a description.
Method 2: If it's not the reason above, it could also be that there is a problem with your PC's saturation settings, select ** in step 1, Intel Graphics Settings, then select the monitor below, and select Color Settings on the left side. Destruction.
<> click Enter a description.
<> click Enter a description.
In the color settings, you can set the brightness, contrast, hue, saturation, etc. four options, here if there is a problem with the sum setting, the computer screen will also be displayed in gray and white, here you only need to set the saturation to 0.
<> click Enter a description.
<> click Enter a description.
First of all, you should also clarify what boiling is, although you already have a deeper understanding. >>>More
There are several aspects of the impact on computers, and we analyze them from these two points: >>>More
Hello, of course you can. You can apply to your company's supervisor for a special ticket, and you can go to the local tax office to make a purchase.
The electric energy meter should go, because the TV is in standby mode, about 2w of electricity, the current use of the electric energy meter is electronic, very sensitive, razor charging energy meter counts. So when you don't use the TV, be sure to turn off the power and unplug it.
You and your ex-husband write a divorce property division agreement in a state of divorce, and your ex-husband must agree to negotiate together, otherwise it can't, generally the division of divorce property should be determined by the court before or at the time of divorce, and it is difficult to say after divorce, and in the state of divorce, it will be considered that the property is divided or given up.