-
When scanning the code, the mobile phone should not be too close to the vehicle-mounted equipment, and it is best to keep a distance of 3 to 5 cm from the code scanning probe.
When the code scanning is completed, the machine will make a "dang" sound, indicating that the code scanning is successful. If you encounter the prompt of "*** expired" and "*** recognition error", you can click the "Refresh Boarding Code" button to scan the code again, and the payment failure will not incur a fee.
Why launched the scan code ride:
Traditionally, we have to bring a lot of cash or bank cards with us, but we can't use it in some small retail stores and public transportation. Once there is no change, you will face the embarrassing situation of "difficult" to take the car. Therefore, in order to facilitate the travel of the public, the implementation of the scan code payment application, even if you do not bring change, you can scan the code to pay.
Benefits of scanning the QR code to ride:
First: get on and off the bus, scan the code to pay, efficient and time-saving;
Second: whether there is a network or not, it will not be affected! The 0 signal can also be scanned as usual;
Third: Provide password-free and fast payment methods, which is convenient and fast.
-
Hello, the ride code is not available for every mobile phone software to scan the code, its ride code scanning code is limited, you need to use the software they allow to scan the code before it can be used, so if your mobile phone can't scan the code, you should ask the driver of the car, the driver will definitely tell you what is going on and what to do, I used to come over like this, very normal.
-
Your travel code can't be scanned, so it may be a problem that your travel code is invalid, or you need to refresh it again.
-
You travel by car, then you must have this traffic when you scan the code, that is to say, you can scan this when you have a network, if your mobile phone does not have this network at all, then it must not work, so it is necessary to have a network.
-
Troubleshoot Sweep System Issues, Phone Issues:
1. The location angle of the mobile phone is neat.
2. Turn up the brightness of your phone.
3. Turn off the eye protection mode of your phone.
This will most solve the problem.
-
Is it not enough to travel by car, it is possible that your mobile phone mobile data is not turned on, or your GPS location is turned off.
-
I think under normal circumstances, you can't find the travel code in the morning, it must be your network is not good, you can try to change the network, or shut down and restart it, see if it's okay.
-
It's possible that your network isn't very good. It may be that your phone is too stuck, and then the display is very slow when you scan it out.
-
Why can't I scan the stinky car and horse with my car travel code? We have to **,**After that, we can go to burn a** before we can go to rub the car, if not**, of course you can't get it.
-
Doesn't Alipay have a travel code on it? Tie the travel code to the bank card or account, and the balance can not be used directly.
-
Why can't I scan the code when I travel by car, it's impossible, either you don't have the Internet, or you don't have the Internet on the screen of your mobile phone.
-
Well, is there a bus or a subway for the travel code? Well, you need to go to a place and choose his local boarding code. If you look for it, you usually look inside the card pack.
-
Whether you don't have a data network, or location information.
-
It may be that there is a problem with your mobile phone network, or it may be that the travel code registration is not perfect! Specific issues must be looked at on a case-by-case basis.
-
That must be the question of your god car, if you are in Shenzhen? Normally, there is no problem with the ride.
-
Summary. 3. In some cities, the boarding code needs to be recharged with a part of the money first, if there is no invalid situation, it may also be because there is no fare in the card, and the user needs to recharge a certain amount of money to the card, and then you can scan the code to take the car.
There are three reasons why Alipay bus code cannot be swiped:
There are three reasons why Alipay bus code cannot be swiped:
1. The distance between Alipay's boarding code and the scanning machine is too close, in this case, the user needs to take the mobile phone a little farther away.
2. The network status of the bright cherry hunger mobile phone is not good or the current network is busy, there may be an invalid code, generally only need to wait for the song to refresh the page again to generate a new boarding code.
3, the Ministry of Tong does not have Hongxun's ride code need to recharge a part of the money first, if there is no invalid situation, it may be because there is no fare in the card, the user needs to recharge a certain amount of money to the card, you can scan the code to take the car.
-
Summary. The reasons why Alipay can't swipe the bus code are as follows: 1. The ride code is too close to the code scanning machine:
The boarding code must be at a certain distance from the scanning machine to be successfully scanned, and the machine cannot recognize it if it is too close. 2. The current network is busy: when an invalid code appears, you can refresh the page or turn off the mobile phone traffic and turn it on again, and use the newly generated ride code to take the bus.
The reasons why Alipay can't swipe the bus code are as follows: 1. The bus code is too close to the code scanning machine: the basic book bus code must be at a certain distance from the code scanning machine to be successfully scanned, and the machine cannot recognize it if it is too close.
2. The current network is busy: when there is an invalid code, you can refresh the page or turn off the mobile phone traffic and turn it on again, and use the new bus code generated by Bo Jihong to take the bus. 3. Some cities need to recharge first and then take the car
If the current *** invalid Zizhen may be because there is not enough fare in the card, you can charge the card first, and then scan the code to take the car.
You've done a great job! Can you elaborate on that?
The reasons why Alipay can't swipe the bus code are as follows: 1. The bus code is too close to the code scanning machine: the basic book bus code must be at a certain distance from the code scanning machine to be successfully scanned, and the machine cannot recognize it if it is too close.
2. The current network is busy: when there is an invalid code, you can refresh the page or turn off the mobile phone traffic and turn it on again, and use the new bus code generated by Bo Jihong to take the bus. 3. Some cities need to recharge first and then take the car
If the current *** invalid Zizhen may be because there is not enough fare in the card, you can charge the card first, and then scan the code to take the car.
-
Hello, there are three reasons why Alipay's boarding code is not sold: 1. The distance between Alipay's boarding code and the scanning machine is too close, in this case, the user needs to take the mobile phone a little farther. 2. The network status of the mobile phone is not good or the current network is busy, and there may be an invalid code.
3. In some cities, the boarding code needs to be recharged with a part of the money first, if there is no invalid situation, it may also be because there is no fare in the card, and the user needs to recharge a certain amount of money to the card, and then you can scan the code to take the car.
-
What is the reason why the bus code can not be scanned often when taking the bus Alipay code can not be scanned?
The reason why Alipay's boarding code can't be swiped out is that the world has won 3 points: 1. The distance between Alipay's boarding code and the scanning code machine is too close, in this case, the user needs to take the mobile phone a little farther away. 2. The network status of the mobile phone is not good or the current network is busy, there may be an invalid code, generally only need to wait for a while to swipe the balance again to take the new page to generate a new boarding code.
3. In some cities, the bus code needs to be recharged with a part of the money first, if there is no invalid situation, it may be because there is no fare in the card, and the user needs to recharge a certain amount of money to the card, and then you can scan the code to take the car.
-
Hello dear, I'm happy to answer for you: The answer is: There are the following 3 points for the original cause:
1. Alipay's ride code and sweeping Xiangliang code machine are too close to the New Year's banquet, in this case, the user needs to take the mobile phone a little farther away. 2. If the network status of the mobile phone is not good or the current network is busy, there may be an invalid code, and you generally only need to wait for a while to refresh the page again to generate a new boarding code. 3. In some cities, the boarding code needs to be recharged with a part of the money first, if there is no invalid situation, it may also be because there is no fare in the card, and the user needs to recharge a certain amount of money to the card, and then you can scan the code to take the car.
-
Dear I'm glad to answer for you, the following is the answer to your query, I hope it will help you Hello code, the car *** can not be scanned out of the following situations: 1The brightness of the mobile phone screen is too low, resulting in *** not being scanned.
You can shout to turn up the brightness of the mobile phone screen and try again. 2.Poor quality, such as blurring, distortion, etc., will also cause the scan to not be scanned.
You can try to make *** clearer, or get the same *** from other sources. 3.If there is a problem with the mobile phone camera, such as dust, damage, etc., it will also affect the scanning of the rubber mold.
You can check if the phone camera is normal. 4.If there is a problem with the scanning software, you can try to change to another scanning software and try again.
If none of the above methods work, you can consider contacting customer service or changing the payment method.
The security measures are not perfect, and there are often incidents of scanning the code and riding the bike, which makes the user be cheated out of a lot of money, so that they also lose confidence in the code scanning function of Mobike, and do not want to continue to use it.
Under normal circumstances, when the user's available credit in Huabei is greater than the payment amount, Huabei can be used to make a one-time payment. >>>More
I don't know if your 4G traffic is turned on or not, if it's on, then you can sweep the money away by scanning your payment code, if it's not on, then it's another situation. >>>More
You may not receive an SMS or verification code for the following reasons: >>>More
There are many reasons for this.
1. The signal is not good. >>>More