What s wrong with my computer?

Hard disk master and slave jump error is a very likely problem, and COMS can also be set to boot from the main disk or from the disk boot or other boot, you see if your hard disk jumper is not on the CS, this is automatic, the system will automatically recognize, and then change the first boot to HDD-0 in the coms, and then restart, if you have installed the system, it should be able to boot, if not, reinstall it once. If the above methods do not work, maybe there is a problem with your motherboard, there is a problem with the IDE device, or there is a problem with your data cable, if you can rule out these possibilities, which is a problem with the hard disk itself, you can use the DM tool to clear the hard disk to zero, but it is a fairly small operation, please back up important data before, otherwise all data will be lost, and then repartition and reformat after zeroing. If it doesn't work, you can try to put your hard disk on your friend's machine to install a system to see if it's normal, if it's normal, it's a problem with the motherboard or a problem with the data cable, say the name, NTFS format is generally supported by more than 2000 systems, 98 or less is generally FAT and FAT32, but 2000 or more systems can also use FAT32 partition format, advanced is backward compatible!

I think it should be the hard disk master and slave jump wrong,And coms can also be set from the main disk boot or from the slave disk boot or other boot,You see if your hard disk jumper is on the CS,This is automatic,The system will automatically recognize,Then change the first boot to HDD-0 in the coms,Then restart,If you have installed the system,It should be able to start,If not,Reinstall it again。 If the above methods do not work, maybe there is a problem with your motherboard, there is a problem with the IDE device, or there is a problem with your data cable, if you can rule out these possibilities, which is a problem with the hard disk itself, you can use the DM tool to clear the hard disk to zero, but it is a fairly small operation, please back up important data before, otherwise all data will be lost, and then repartition and reformat after zeroing. If it doesn't work, you can try to put your hard disk on your friend's machine to install a system to see if it's normal, if it's normal, it's a problem with the motherboard or a problem with the data cable, say the name, NTFS format is generally supported by more than 2000 systems. It's mine.

Your friend has knocked out the master-slave jumper on your hard drive.

It is a few pins on the side of the power cord, and a jumper, if you can find the jumper, plug in the instructions on the installation hard disk, if your friend's and your hard disk are the same, then refer to his above insertion.

Have you built the system from scratch? If not, you try to install the system and see.

There is also a hard disk, as long as you go to another machine to interview the machine, and enter the system, this hard disk must be rebuilt from the system.

Ah, is that the master of the hard disk never set up?

Oh Note: The hard disk is all in the computer where the system was installed for the first time.

Hardware-driven ones can't be swapped out. Ha. ok

。。。Pour. Of course not. The system only recognizes FAT format.

You can find the format and convert it back.

You can also use fdisk. Just one tool will do the trick.

The NTFS format is the format of Win2000. If you want to install the hard disk on the machine, you can reinstall the 2000 system.

The system has been reinstalled. To windongws xp.

The application of computers is becoming more and more common in China, after the reform and opening up, the number of computer users in China has been rising, and the level of application has been continuously improved, especially in the fields of the Internet, communications, and many other fields.

It's possible that the thread inside was smashed loose.

Unafraid. If you have money, you can just throw it and buy a new one.