True love S5280 can t install the motherboard driver

What system are you using, XP or Vista?

Let him automatically find it or install it according to the manual?

1.The built-in driver disc integrates a lot of motherboard drivers, and you may have installed it incorrectly.

2.The driver on the disc is vista.

1. First determine whether your so-called failure to install the driver is a disk problem or a system problem or a hardware problem. First copy all the drivers of the disk to the hard disk (no problem with copying into the disk), and then look to see if there is a motherboard folder (this is the folder of the motherboard driver, perhaps named after the chipset, such as the graphics card will be named after ati or nvidia), open the motherboard driver folder, normally there should be a folder like win xp, win2000, win 98, combined with the system you installed to open the corresponding folder, And install the relevant drivers inside.

2. If it doesn't work like this, it may be a system problem, and it may be a port allocation conflict. The system in the advanced control panel... Hardware... Device Manager, see if there are any exclamation marks in it. That is, there are no drivers or conflicting parts.

Click to open it in the corresponding exclamation mark, right-click, select Install Driver, and manually guide yourself to the driver folder you just copied (select the corresponding folder, if it is a graphics card, you need to select ATI Win XP....this step).

If it is an audio or sound card on the motherboard, you need to select the step of Audio Win XP) and let the system choose its own driver.

3. If the above still does not solve the problem. It is recommended that you use the BIOS first, and if most of the BIOS options cannot be changed, then you will quit reinstalling the system. If most of the BIOS settings can be changed, it is recommended that you restore the initial settings before reinstalling the system.

After reinstalling, install the antivirus software first, Kaspersky is recommended. Then install and choose to install the motherboard driver (first) and the graphics card driver (later) and the like... It is recommended that you unplug the network cable when reinstalling the system.

First, use Everest to test out the specific model of the motherboard chipset, and then go to the driver home (by specific model

I can't say this, I don't know which one they buy, maybe it's not the same from batch to batch, you'd better use software like CPU-Z or Everst to test it, or just open it and see (lose the warranty) And the problem is that sometimes the motherboard of the brand machine You can't find it on the motherboard manufacturer's website.

This is the latest NVIDIA graphics driver official version of WinXP system that supports 7100GS.

Which one upstairs is old, which one is still from 2006...

It is recommended that you take a look at the next driver wizard.

The motherboard driver is not installed, and there should be no problem when it is turned on.

However, there will be some yellow exclamation marks in the device manager, which is basically the unusability of some bus devices or onboard devices, although it will not have a serious impact on the use of the system, but it will affect the use of some normal functions.

So after installing the system, the first thing is to install the motherboard driver, if you can't install it, you must know the model of your main board and the model corresponding to your driver, generally speaking, there will be no situation that can not be installed, Tongqian (before installation, it is best to turn off the anti-virus software, firewall and other software).

If you don't have a motherboard driver, you may not be able to recognize some hardware, such as optical drives, and if you don't have a motherboard driver, some functions will be useless, so it's better to install them.

Remove the protective plate on the side and see if there are any nuts or anything like that near the panel. If not, remove it from the case. Hard demolition.

You open the case, take a good look at it, you should be able to remove it, it's very simple!!

Disassemble the chassis and try to remove it from the inside.