Can the mechanical engine lubricating oil be used in the car?

Whether FUCHS mechanical lubricants can be used in gasoline vehicles.

Yes,However, it is not a substitute for chain lubricants. Although adding waste engine oil to the chain can play a certain role in lubrication, in fact, because the waste engine oil has iron filings worn by the engine, it will aggravate the wear of the chain, which shows that waste engine oil cannot replace chain lubricating oil.

A type of lubricating oil lubricant, which is between two objects in relative motion, and has the function of reducing the friction caused by the contact between two objects. In addition, it has the functions of cooling, rust prevention, cleaning, sealing and cushioning. Lubricants are divided into diesel engine lubricants and gasoline engine lubricants, which are available in different grades.

Engine oil cannot be used as hydraulic oil, the oil is lubricated, and the hydraulic oil is transmitted. Engine oil and hydraulic oil are not used in the same way and cannot be substituted for each other.

1. Engine oil can not replace hydraulic oil, if you add oil to the hydraulic system, although it can temporarily play the same effect as hydraulic oil, but it will not take long for the oil seal and rubber seal ring in the hydraulic system to age quickly, so you can't replace hydraulic oil with oil.

2. Hydraulic oil is formed by adding various additives to the petroleum base oil, in addition to the same lubricity as the engine oil, its anti-foaming and anti-emulsibility are higher than the requirements of the oil. Don't just substitute engine oil, then the life will be up quickly.

3. Hydraulic oil can not be replaced by anything, high compression ratio, and the properties of hydraulic oil cannot be replaced. Hydraulic oil is made to transmit pressure and has a relatively high viscosity.

Engine oil, on the other hand, is mainly lubricated, has a low viscosity, and the viscosity will continue to decrease as the temperature increases. At least much lower viscosity than hydraulic oil. So theoretically, it is not possible to replace hydraulic oil with engine oil. It will cause the power of the machine to decrease, the original oil leakage and other things to happen.

Hello dear and happy to answer your <>

Kiss olive oil, glycerin, rapeseed oil, dish soap, paraffin oil, sesame oil, etc. can be used as lubricating oil. Lubricating oil is a liquid or semi-solid lubricant used in various types of automobiles and mechanical equipment to reduce friction and protect machinery and processed parts, mainly playing the role of lighting and lubrication, auxiliary cooling, rust prevention, cleaning, sealing and buffering. As long as it is applied between two objects in relative motion, and can reduce the friction and wear caused by the contact between two objects, it is lubricating oil.

I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and we look forward to serving you again. Wishing you well; Happy life, everything goes well [warm] [warm].

Lubricating oil cannot be used as engine oil. Engine oil is indeed a group of silver lubricating oil, but it is only a kind of lubricating oil, which does not mean that all lubricating oil can be used as engine oil. Just like a gasoline car has a special engine oil for a gasoline engine, and a diesel car also has a special engine oil for a diesel engine, neither of which can be used in the wrong car.

1.Lubricant is a liquid or semi-solid lubricant used in various types of automobiles and mechanical equipment to reduce friction, protect machinery and process vertical or filial parts. It is generally composed of base oils and additives.

2.Engine oils, oils, or engine oils are a class of substances enhanced by additives used in base oils, primarily anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. The main role of motor oil is to reduce friction and wear on moving parts, remove sludge dispersants and paint cleaners from the engine.

Engine oil is the engine lubricating oil, which can lubricate and reduce wear, cool and cool down, seal and leak prevention, rust and corrosion prevention, cleaning and cleaning, shock absorption and cushioning of the engine.

Lubricating oil is a liquid or semi-solid lubricant used to reduce friction and protect mechanical parts in various automotive machinery and equipment, and plays the role of leak-lease lubrication, cooling and rust prevention. By using lubricating oil, the two move in relative motion.

The friction of the object can be reduced.

Lubricating oil is usually made up of base oil.

and additive composition. Base oils are the main components of lubricants and are divided into three categories: mineral base oils, synthetic base oils and biological base oils. Mineral base oils are used in a wide range of applications and determine the basic properties of lubricants.

Additives make up for the lack of base oil properties, make the lubricant have richer properties, and are also an important part of the lubricating oil.

Engine oil is a kind of lubricating oil, but the lubricating oil is not necessarily the engine oil, the lubricating oil is used to reduce friction on mechanical equipment or wear pairs, such as gear oil, anti-wear hydraulic oil, etc., and butter is also a lubricating oil.

So the difference between car oil and lubricating oil is very obvious, and the reason why engine oil is special is because of the car engine.

The structure is more complex, and the matching accuracy between parts is higher, so the requirements for lubricating oil will be higher, it can be said that the engine is the heart of the car, and the oil is the blood of the engine.

There are many metal surfaces in the engine that rub against each other, these parts move fast, the environment is poor, and the working temperature can reach 400 -600, in such harsh working conditions, only specific lubricating oil can play a role in reducing the wear of engine parts and prolonging the service life.

Although the engine oil is also composed of base oil reflux and additives, the base oil is the main component of the lubricating oil, which determines the basic properties of the lubricating oil, but the different additives make up for the lack of base oil performance and give it new properties, so that it has corresponding effects for different parts.

Vehicle engine oil and lubricating oil, that is, their working range is different, that is, different uses. The main function of lubricating oil is to reduce friction for parts and components, and to lubricate and cool the machine when it is working. As a kind of stationary oil, engine oil is a kind of lubricating oil.

Comparison of engine oil and lubricating oil.

Engine oil and lubricating oil are mainly different in the scope of work, that is, different uses. Engine oil is also a type of lubricating oil, but lubricating oil does not represent engine oil, and engine oil can be referred to as engine lubricant. It has a wide range of applications and can be divided into several models, including summer oil, winter oil, semi-synthetic oil, and fully synthetic oil.

Around 5000 km, the engine was replaced with semi-synthetic oil. The engine is changed with synthetic oil every 10,000 km.

The difference between engine oil and lubricating oil.

In motor oil, there are base oils and additives, where the base oil consists of lubricating oil. Because the types of oil are different, the additives added are also different, so be sure to choose the oil for machinery. The engine oil must be chosen, and other machines can use lubricating oil.

The impact of not changing the oil of the car:

1. Serious deterioration of engine oil. After the oil is injected into the car, it should be replaced 5,000 kilometers or half a year ago, and over time it will deteriorate, resulting in a decrease in adhesion and severe water sampling.

2. Increase in particulate matter. The oil is not changed for a long time, the more likely it is to produce some particulate matter, and even metal chips and gelatinous matter, with the increase of time, the life of the engine will be seriously affected.

3. The engine is scrapped. The biggest role of engine oil is lubrication and buffering, but when the oil is not changed for a long time, the lubrication degree decreases, the entire engine hood Shiling work will be dry, without any lubrication, the engine is very easy to overheat and scrap.

The difference between motor oil and lubricating oil is:

1. Engine oil is a type of lubricating oil, and lubricating oil is a lubricant for various mechanical parts;

2. Lubricating oil is a liquid or semi-solid lubricant used to reduce friction and protect mechanical parts on various automotive machinery and equipment to lubricate, cool and prevent rust, and the use of lubricating oil can reduce friction between two relatively moving objects;

3. Lubricating oil is usually composed of two parts: basic liquid oil Huiyou and additives, base oil is the main component of lubricating oil, which can be divided into three categories: mineral base oil, synthetic base oil and biological base oil, mineral base oil is widely used, which determines the basic properties of lubricating oil, and additives make up for the lack of base oil performance, so that lubricating oil has richer performance and is also an important part of lubricating oil.

Summary. Hello, this question can give you a perfect reply, wait for me to sort out the information, I'm typing, 2-3 minutes, don't finish.

Can car engines be lubricated with grease.

Hello, this question can give you a perfect reply, wait for me to sort out the information, I'm typing, 2-3 minutes, don't finish.

This is not possible, the vehicle engine must be lubricated with lubricating oil, the grease can not meet the requirements of high-speed rotation of the engine due to the viscosity is too large, and after the use of lubricating oil, because the lubricating oil has very good fluidity, it can penetrate into the friction surface with very small gaps, form a complete oil film, and separate the friction surface, so that the parts can be effectively lubricated and the service life of the engine can be prolonged, and the oil must be replaced every 5,000 to 10,000 kilometers or once a year. In this way, the carbon deposits inside the engine can be cleaned in time, the lubrication effect can be ensured, the noise of the engine can be reduced and the service life of the engine can be prolonged.

Lubricant doesn't have to be motor oil.

Engine oil, that is, engine lubricating oil, can lubricate and reduce friction, assist cooling and cooling, seal leakage, rust and corrosion, shock absorption and cushioning for the engine. Lubricating oil is used in various types of automobiles, machinery and equipment to reduce friction, protect machinery and processed parts of liquid or semi-solid lubricants, lubrication, auxiliary cooling, rust prevention, cleaning, sealing and buffering.

Classification of automotive lubricants:

1.Mineral Oil:

At present, the engine oil on the market can be divided into two types: mineral oil and synthetic oil due to the different base oils. Synthetic oil is divided into: fully synthetic and semi-synthetic.

Fully synthetic motor oil is of the highest grade. Compared with synthetic oil, mineral oil has a weaker base oil strength and needs a higher viscosity than synthetic oil to meet the lubrication requirements at high loads.

2.Fully Synthetic Motor Oil:

Generally speaking, it is to replace the mineral base oil with esters or polyolenes, and then mix it with additives, which is synthetic engine oil, and the word "synthetic" will be marked on the synthetic oil barrel. Synthetic engine oil has the characteristics of good stability and durability, so generally speaking, the engine oil change interval using fully synthetic engine oil can be extended to 7500-10000 km.

3.Semi-synthetic motor oil:

Semi-synthetic engine oil is the international three types of base oil modulated into lubricating oil, is the basis of mineral oil after hydrofission technology purification products, it is made of mineral oil, fully synthetic oil in a 4:6 relationship mixture, the purity of semi-synthetic oil is very close to full synthetic oil, but its cost is slightly higher than mineral oil, is an ideal transition product from mineral oil to synthetic oil.

Lubricating oil is not the same as engine oil.

Engine oil can be said to be a lubricating oil, but lubricating oil is not necessarily engine oil.

Lubricants also include many other types of fluids or lubricants, but only if they are applied to two relative movements.

The function that can reduce the friction and wear caused by the contact between two objects is lubricating oil.

Different types of lubricating oil bear different responsibilities, such as engine oil, which needs to play the role of lubrication, auxiliary cooling, corrosion and rust prevention, shock absorption and buffering, sealing and leakage prevention.