Very interesting graphics card issue in

1: You can install a dual system, one system to play at night, one system to play during the day, and unload the graphics card on the system that you play during the day.

2: Use only one system to reduce the frequency of the graphics card with the control program of the graphics card, and it is OK to restore it when you want to use it

The answer to this has to be found in the motherboard's BIOS description. Some motherboards can control the order in which the graphics card is used, that is, what graphics card is used as the image output when the host starts. Even then, the noise and power consumption of the graphics card is not solved (because the discrete graphics card still works, it just doesn't output images from it unless you remove it).

If you want to solve the fundamental problem, you still have to start with the graphics card fan, see if the fan is short of oil or damaged, or replace the water-cooled or large passive graphics card cooler, there is no good way to do anything else.

The P45 does not come with an integrated graphics card, if you can change the motherboard BIOS, you can choose it every time you boot it. But then you'll have to change the display socket from the back of the case......It doesn't get any simpler than this......However, you can consider a hybrid firefight or hybrid SLI, so look at the web page, when playing small games, it is an integrated graphics card that works, and when you play large 3D, it is a dual card that works at the same time If your discrete graphics card is ATI, change to a motherboard with integrated HD3200, if it is NVIDIA, change to a motherboard with integrated 9300 (Xiangsheng's hybrid motherboard with integrated 9500GT is better), in addition, pay attention to the CPU interface to be right

Hello subject, if you troubleshoot the motherboard fault, (the motherboard power supply voltage is normal), that is, the graphics card is faulty, it may be the power supply, it may be the video memory, or it may be caused by the virtual soldering of the solder joint, it is best to find a computer technician for inspection and maintenance. Due to the large power supply current of the graphics card, there are many failures in the general power supply, check carefully, and replace the graphics card with a replacement method.

If this phenomenon also occurs on the motherboard's BIOS interface, it means that it is a hardware problem.

In terms of hardware, problems with monitors, display cables, graphics cards, motherboards, and memory can all cause this phenomenon.

It is recommended to use the replacement method, first check the monitor, monitor data cable, and graphics card to see which one has the problem.

The graphics card has a blurred screen, it may be that the core is soldered, and there are conditions to find an after-sales service or repair center to try it.

The driver has been updated, it can't be explicitly normal, try to update to the latest driver, and the motherboard should also be updated, which is not the possibility of incompatibility between the motherboard and the graphics card.

It is recommended to go to a computer repair shop to find a professional person to check the hardware for you, it should be that the graphics card is broken, and the graphics card needs to be replaced.