How to install the buried basketball stand, how to embed the embedded parts of the basketball stand

If it is an embedded part, first deal with the embedded parts, according to the requirements of basketball rules, the vertical projection in front of the rebound is 120 cm away from the inner edge of the bottom line, and then determine the position of the embedded parts according to the number of forward extensions of the basketball stand;

If the pedestal and the basketball stand are integrated, the position of the basketball stand should be determined according to the premise that the basketball stand is 120 cm above, generally fixed with concrete, the volume is one meter square, it is best to fix the basketball stand first, and then the back board, and then install the rebound after the concrete solidifies.

The buried basketball stand should be put on the field before installation, and it is best to draw the line of the basketball court before installation. The main place to pay attention to in the buried basketball hoop is the location of the buried pit, and it is necessary to know how long the arm of the basketball hoop is before playing the hole. After the buried basketball hoop is put into the pit and the position is determined, the pit is filled with concrete, and it shall not be used within three days, and the rebound generally has 2-4 connecting rods, which are mainly used to adjust the angle of the rebound and stabilize the rebound.

For the special installation position of some basketball hoops, such as the roof or garage roof, the way of embedded bolts can also be used, the flange is buried in the pit and filled, and the embedded parts at the bottom of the basketball hoop can be connected.

The buried basketball stand is a kind of basketball stand commonly used outdoors, which is to bury a part of the basketball rack in the ground to realize fixation and realize the use of the basketball stand.

Summary. 1.Dig a 60*60* (length*width*depth) pit on the site where the equipment is to be installed; Overseer away from the sideline 2

Start digging a pit 20 cm away from the basketball line, place the embedded parts put the 3 holes in front (the frame), and then fill in the mixed sand, gravel and cement. Remember to mix these three evenly, and the filling should be firm, without loose and small holes; 3.The cement mixture can not pass through the 6 bolts of the embedded part (word frame), otherwise the equipment cannot be installed; 4.

In clear weather, wait until a week (seven days) later, and you can start installing the XD-basketball hoop;

1.Dig a pit with a draft of 60*60* (length * width * depth) on the site where the equipment is to be installed; Overseer away from the sideline 2Start digging a pit 20 cm away from the basketball line, place the embedded parts put the 3 holes in front (the frame), and then fill in the mixed sand, gravel and cement.

Remember to mix these three evenly, and the filling should be firm, without loose and small holes; 3.The cement mixed town filial piety can not cross the 6 bolts of the embedded parts (word frame), otherwise the equipment can not be installed; 4.In clear weather, wait until a week (seven days) later, and you can start installing the XD-basketball hoop;

Generally, the embedded parts of the buried fixed basketball stand are 40 by 40 cm, so the following steps are completed when the embedded parts are embedded: draw the pit of the excavated embedded parts 45 cm away from the bottom line of the basketball court; The hardened site must be drilled with a Sun Defeat electric hammer impact drill to dig a cement pit (unhardened can be excavated manually), the specification is 70 by 70 by 70 cm, and then the embedded parts are placed in the middle of the pit, poured with cement concrete, and use an electric vibrating rod to vibrate the draft, waiting for the cement concrete to harden (generally a week after pouring can be installed basketball hoop body).

Steps:1. Place the base of the blue ball rack in the installation position.

2. Install columns and screws.

3. Install the probe arm, align the probe arm screw hole with the column and screw it.

Fourth, install the rear tie rod.

Fifth, install the blue plate, pull brace

Installation and construction method of mobile basketball stand.

First, the key points of installation and construction.

1. Be cautious when installing to avoid hurting people.

2. The box is lined with an early stare and the order of installation, the box, the column, the probe arm, the rear tie rod, the rebound, the basket, the upper pull rod, the lower pull rod, and the counterweight.

3. When the tempered glass backboard is installed, the five connection points must be on a plane, and the force at the five points should be uniform; The probe arm, the blue plate, and the blue ring should be in a line. Hail slip probe arm and blue ring are strictly forbidden to contact with the glass blue plate.

4. After the composite FRP backboard is installed, the connection point should be sealed with glass glue to avoid damage to the blue plate by rainwater.

Second, the installation of data points.

1. The distance between the pillars of the two basketball hoops is buried in the arm length.

2. The basketball board extends vertically downwards from the inner edge of the bottom line.

3. The inner edge of the bottom line is 40cm outward; The pit is 75cm deep, 70cm long x 70cm wide.

4. The column of the basketball hoop is 60cm from the inner edge of the bottom line.

5. The upper edge of the hoop is off the ground.

Summary. 1. MobilityThe mobile basketball hoop can be moved by looking at the name, and it can be transferred and replaced as needed. The buried basketball hoop is fixed after being installed there, and even if it is dug out, the supervisor cannot be used in the next field, but the rebounds, levers, etc. can be disassembled as spare accessories for other basketball hoops of the same type.

Second, the safety buried basketball stand adopts the method of digging pits and deep burial and pouring concrete, which is relatively safer than the box-type mobile basketball rack.

1. MobilityThe mobile basketball hoop can be moved by looking at the name, and it can be transferred and replaced as needed. The buried basketball is fixed after being installed there, and even if the supervisor digs it out, it is not possible to use it to the next court, but the rebound, pull rod, etc. can be disassembled as a spare part for other basketball hoops of the same type. Second, the safety buried basketball stand adopts the method of digging pits and deep burial and pouring concrete, which is relatively safer than the box-type mobile basketball rack.

3. Scope of application: Indoor and outdoor basketball courts can use mobile basketball stands, and buried basketball stands are only suitable for outdoor basketball courts. Fourth, the size of the standard basketball court is 28m*15m, and the reach arm of the mobile basketball stand and the buried basketball stand is generally 2 meters. The box of the mobile state basketball stand is generally 2m*1m, the diameter of the main pipe of the buried basketball stand is 219mm, and the foundation pit is required to be 70*70*75cm.

Then, if a standard basketball court uses a mobile basketball stand and a secondary court, the length of the field should be at least above, and the length of the field using the ground-air buried basketball stand plus the auxiliary court should be more. In addition, it is best to reserve a buffer zone of more than 50cm on each side, and for the wide-sided sub-field, it can be reserved according to the field site.

Five good eyes, mobile basketball hoops range from a few thousand yuan to 10,000 yuan, and buried basketball hoops are generally around a few thousand yuan. Then, through the above introduction, we can conclude that the advantages of the buried basketball stand: small footprint, relatively cheap, and higher safety.

Disadvantages: Not movable, only suitable for outdoor venues next to you. The advantage of the box-type mobile basketball stand is that it is convenient, movable, and can be used on both indoor and outdoor basketball courts, but the disadvantage is that it covers a large area and is high.

Therefore, we can choose the right basketball hoop according to our own needs.

Summary. It is possible to install a basketball hoop on a wooden floor. Wooden flooring is usually a strong and durable floor material that can withstand the impact and weight of basketball.

However, in order to prevent damage to the floor, it is advisable to take some precautions before installing a basketball hoop, such as using suitable protective pads and brackets, to distribute the weight and reduce the impact of the impact on the floor. In addition, it should also be ensured that the basketball hoop is securely installed and maintained to avoid any possible damage to the wooden floor.

It is possible to install a basketball hoop on a wooden floor. Wooden floors are often sturdy and durable, and can withstand the impact and weight of basketball. However, in order to prevent damage to the floor, it is advisable to take some precautions before installing the basketball hoop, such as using suitable protective pads and bracket finger training, to distribute the weight and reduce the impact of the impact on the floor.

In addition, it should also be ensured that the basketball hoop is securely installed and maintained to avoid any possible damage to the wooden floor.

Can you elaborate on that a little bit more?

A basketball hoop can be installed on a wooden floor, but precautions such as the use of protective mats and brackets to ensure a secure installation and regular maintenance to prevent damage to the floor.