Are multilayer capacitor 104 and CBB capacitor 104 interchangeable?

The reading capacitor 104 and the CBB capacitor 104 are not interchangeable, they are two different products, their models and power are different, and they cannot be used with each other.

The capacitance of the two capacitors is the same, so they can be used directly and interchangeably.

The materials of the two capacitors are different, and the stability of the multilayer capacitor is better. In places with high usage requirements, it is recommended to use multilayer capacitors.

As long as the withstand voltage is the same or sufficient, it is perfectly fine.

They are interchangeable, provided that the withstand voltage is the same or higher.

Tweet ** and take a look. Somewhere on the board. If it is an inverter or power supply, it is recommended not to interchange.

It's not that this kind of glory with Oz and West Forced Beep is interchangeable, there is no problem, his two capacities are the same, but the material is different, causing the difference.

The capacitors of these two models are not interchangeable.

Capacitance, also known as "capacitance", refers to the amount of charge stored at a given potential difference, denoted as c, and the SI unit is farad (f). Generally speaking, the charge will move under force in the electric field, and when there is a medium between the conductors, it hinders the movement of the charge and causes the charge to accumulate on the conductor, resulting in the accumulation and storage of the charge

Summary. Hello, I am glad to answer for you, your question is: What is the difference between a 104,100 multilayer capacitor and a CBB The answer is: the difference between a multilayer capacitor and a CBB capacitor 1. The CBB capacitor is dominated by a red appearance, while the monolith capacitor is yellow.

What is the difference between a monolith capacitor of 104,100 and a CBB.

Hello, I'm glad to answer for you, your question is: What is the difference between a 104,100 monolith capacitor and a CBB molded sedan The answer is: the difference between a monolith capacitor and a CBB capacitor 1. CBB capacitors are mainly red in appearance, while monolithic capacitors are yellow.

2. The volume of CBB is larger than that of monolithic capacitors.

CBB capacitor CBB capacitor is also known as polypropylene electric modification and capacitance. Capacitance 10 pico-10 micro-method, rated voltage: 63--2000V.

It replaces most polystyrene or mica capacitors and is used for demanding circuit fluids. The performance is similar to that of polystyrene, but the size is small and the stability is slightly worse.

Multilayer capacitor Multilayer capacitor is another name for multi-friend missing layer ceramic capacitor, referred to as MLCC, which is widely used in electronic precision instruments. All kinds of small electronic devices are good for resonance, coupling, filtering, and bypass.

Multilayer capacitor is another name for multilayer ceramic capacitor, English name monolithicceramiccapacitor or multi-layer ceramiccapacitor, abbreviated as MLCC, according to the material used, can be divided into three categories.

The basic structure of a simple parallel plate capacitor is composed of an insulated intermediate dielectric layer plus two conductive metal electrodes, and the basic structure is as follows:

Therefore, the structure of multilayer chip ceramic capacitors mainly includes three parts: ceramic dielectric, metal inner electrode, and metal external electrode. The multilayer chip ceramic capacitor is a multi-layer superimposed structure, which is simply a parallel concatenation of multiple simple parallel rock excavation plate capacitors.

Micromethod represents the unit of capacitance size rolling jujube ruler, and the English symbol is f Chinese called micromethod.

1 farad (f) = 1000 millifarth (mf) = 1000000 microfarf (f) 1 microfarf (f) = 1000 nanofarth (nf) = 1000000 picomethod (pf).

Micromethod is a commonly used unit in calculations. <>

Multilayer capacitors except capacitors"Straight through crossing"In addition to the general characteristics, it also has the characteristics of small size, large specific volume, long life, high reliability, and suitable for surface installation.

With the rapid development of the world's electronics industry, as the basic component of the electronics industry, monolithic capacitors are also moving forward at an astonishing speed, increasing at a rate of 10% to 15% every year.

The capacitance units of capacitance are: method (f), micromethod (uf), picomethod (pf) generally we do not use method as a unit, because it is too large.

The conversion relationship between units is: 1f = 1000000uf 1uf = 1000000pf In use, it is also common to see the unit: NF

1uf=1000nf1nf=1000pf

For example, if the capacitor is directly identified, it means that the capacity is 47UF, the capacitor withstand voltage is 25V, and the mathematical notation method is used: the standard value is 104, and the capacity is: 10x10000pf = if the standard value is 473, it is 47x1000pf =

The following are all denoted to the power of 10).

Another example: 332 = 33x100pf = 3300pf, so how big is the capacitance of the monolith capacitor 104, we can identify it according to the method of identification, and the identification 104 represents the capacity size.

1. 104 capacitance value.

Method Step 1:

The capacitance of 104 is to add 4 zeros (pf) after 10, that is, 100000pf, that is.

2. Supplements. Method Step 1:

1 farad (f) = 1000 millifarnes (mf).

1 millimeter (mf) = 1000 micromethod (f).

1 microfartha (f) = 1000 nanofartha (nf).

1 Nafa (NF) = 1000 Pico-Fa (PF).

That is: 1f = 1000000 f

1μf=1000000pf

Name: Polypropylene Capacitor (CBB).

Electric capacity: 1000p--10u

Rated voltage: 63--2000V

Main features: performance is similar to polystyrene but small size, slightly poor stability Application: instead of most of the polystyrene or mica capacitors, the biggest disadvantage of multilayer capacitors for higher circuit requirements is that the temperature coefficient is very high, and the steady drift of the oscillator makes people unbearable, we make a 555 oscillator, the capacitor is just next to 7805, after starting, use the oscilloscope to see the frequency, and then change it slowly, and then replace it with polyester capacitors.

Features of multilayer capacitors:

Large capacitance, small size, high reliability, stable capacitance, good high temperature and humidity resistance, etc.

Application: Widely used in electronic precision instruments. All kinds of small electronic devices for resonance, coupling, filtering, bypass.

Capacity range: Withstand voltage: twice the rated voltage.

It is said that the monolith is also called multilayer porcelain dielectric capacitor, which is divided into two types, type 1 has good performance, but the capacity is small, generally less than, and the other is called.

Type II, large capacity, but average performance.