What is the function of the motor slip ring?

Murflon slip rings are generally in contact with brushes, and it is generally believed that periodic forward and reverse rotation has a greater impact on the contact, but this problem can be avoided if the contact between the ring and the brush is selected appropriately.

The electric slip ring is composed of brushes, conductive rings, insulating materials, bonding materials, group brackets, precision bearings, dust covers and other auxiliary parts. The slip ring can improve the performance of the system, simplify the system structure, avoid the sprain caused by the wire in the process of rotation, and is a precision power transmission device that realizes the image, data signal and power transmission between two opposing rotating mechanisms.

The application field of precision slip rings is very wide, and the electronic devices such as radar, rate turntables, gyrometers, inertial platforms and automation equipment often use conductive rings and brush-matched sliding electrical contact devices for power and signal transmission. In particular, military equipment requires this kind of electrical contact device to have high reliability and long service life, that is, it requires good conductivity, electrical erosion resistance, environmental atmosphere corrosion resistance, and wear resistance of conductive rings and brush materials.

In order to meet the requirements of long life and reliable contact, the conductive rings and brushes of the precision slip rings produced by Jingpei Electronics are generally made of high-quality materials. In order to ensure that the slip ring can work normally under the conditions of vibration, impact and acceleration, the brush material selected by Jingpei has sufficient strength and good elasticity, and has good conductivity and is not easy to oxidize.

Jingpei Electronics has successively passed the GJB9001 military quality system and other military three certificates, ISO9001, ISO14001, FCC, CE, UL, ROHS, REACH, BV Classification Society, explosion-proof and other authoritative certifications, and obtained 47 national patents, which can meet the military precision slip ring not only stable performance, long life, maintenance-free, but also fully meet the special requirements of military equipment in different application fields, such as high protection level, explosion-proof, vibration-resistant, impact-resistant, High and low temperature resistance, high voltage resistance, low electrical noise, very low signal transmission loss, etc.

Jingpei Electronics is a veteran manufacturer of electric slip rings, with rich experience in R&D and production. Jingpei can tailor various types of slip rings for you according to different use cases. Jingpei ultra-miniature slip ring has a diameter of only, length and compact size, which can meet the needs of customers with very small installation space; Jingpei high-current series slip rings are made of top-grade imported graphite alloy, and the current can be as high as several thousand amperes; Jingpei disc slip rings can be integrated with high-precision photoelectric encoders, which can provide customers with accurate positioning with up to high accuracy, with the advantages of small size, high precision, reliable work, and digital interface; Jingpei slip rings can also integrate various signal types such as high frequency, optical fiber, gas and liquid, etc., to meet your various equipment needs.

Jingpei Electronics' core processes and materials cooperate with international first-class businessmen, with a number of technical inventions, a stable technical exchange platform, professional design software, advanced project management mode and a professional technical team to ensure the design quality from the source, laying the foundation for product quality. If you have any needs and questions about electric slip rings, you can go to Jingpei's official website to understand!

The principle of the electric slip ring is as follows:

A conductive slip ring is an electromechanical component that can transmit current and data signals from a fixed device to a rotating device, also known as a conductive ring, collector ring, combiner ring, brush, rotating electrical joint or electrical drill bit.

The working principle of conductive slip rings is very simple, and it can be seen that they are generally installed in the rotation center of the equipment, which is mainly composed of two parts: rotating and stationary. This means that the rotating part is the rotating structure of the connected equipment, and it can rotate with it when it is running. The stationary part is the center point of the fixed structure, and after understanding the working principle of the conductive slip ring, it will be of great help to the selection of products.

Slip rings can be applied to any electromechanical system that requires unlimited continuous rotation, and has been widely used in amusement, communications, security, electric power, instrumentation, chemical industry, medical, radar, aviation, military, shipbuilding, transportation, construction, industrial automation and other mechanical and electrical equipment.

Analysis of conductive slip ring parts:

If the slip ring is distinguished according to the transmission medium, it can also be divided into electric slip ring, fluid slip ring, smooth ring, and can also be colloquially referred to as "rotary and collapsed" or "spin through".

Slip rings are usually installed in the center of rotation of the equipment and are mainly composed of two parts: rotating and stationary. The rotating part connects the rotating structure of the device and rotates with it, which is called the "rotor". The energy source of a stationary part of a fixed structure connected to a device is called a "stator calendar".

The design structure of the stator and rotor is a precision superposition of a single path, and the number of superimposed channels is set according to the requirements of use. When assembling, the path of the stator and the path of the rotor are corresponded one by one to form the path between the rotor and the stator. The electrical performance of each channel is independent of each other, and there can be no interference.

For the passage between the stator and the rotor to be formed, there must be a contact between the two. Their contacts are the functional parts of the entire slip ring, and they are the carrier of various properties of the entire slip ring. Therefore, the selection of contact materials and parts, the reasonable design, and the precision production and coordination between parts constitute a stable and reliable rotary communication system.

The slip ring is loaded on the rotating equipment, and the various signals required can be transmitted in the rotating state through the leads at both ends of the slip ring. <>

Motor slip ring is a kind of transmission device used in rotating mechanical systems, and its main role is to convert the electrical energy of motor rotation into mechanical energy, number of trips and transfer mechanical energy to rotating parts.

Features of motor slip rings include:

1. It can transmit high power. Motor slip rings can transmit high power electrical and mechanical energy, so they are suitable for mechanical systems that require high power output.

2. It can transmit a variety of signals. Motor slip rings can transmit a variety of signals, such as current, signal, control signal, etc., so it is suitable for machine hall rubber systems that require a variety of signal transmission.

3. It can withstand high-speed rotation. Motor slip rings can withstand high-speed rotation and are therefore suitable for mechanical systems that require high-speed rotation. Can withstand high temperatures.

4. The motor slip ring can withstand high temperatures, so it is suitable for mechanical systems that need to operate in high temperature environments and can adapt to different environments. Motor slip rings can adapt to different environments, such as moisture, corrosion, dust, etc., so they are suitable for mechanical systems that need to operate in harsh environments.

The function of the motor slip ring is to lead the rotor coil to the outside, which is convenient for measuring the rotor current, controlling the motor speed, adjusting the reactive power, etc.

Slip ring motor, also known as three-phase wound rotor AC asynchronous motor, must be connected in series with resistors or reactors in the rotor circuit of Qi bend bus, so that the starting current can be reduced, the starting torque of the high spike is increased, the power factor is increased, and the starting performance of the motor is effectively improved. Therefore, in the mechanical equipment with large capacity and high requirements for rotating torque alarm ruler, this motor is usually selected to drag.

The role of the motor slip ring:

1. Lead the rotor coil outside.

2. It is convenient to measure the rotor current and control the motor speed.

Motor slip ring generally refers to slip ring motor, also known as three-phase wound rotor AC asynchronous motor, must be connected in series in the motor rotor circuit resistor or reactor, in order to reduce the starting current, and the starting torque is increased, the power factor is increased, and the starting performance of the motor is effectively improved. Therefore, in the mechanical equipment with large capacity and high requirements for rotational torque, this motor is usually selected to drag.

Slip ring motor is a special motor, which can realize the transmission of signal, power and so on when it rotates, so it is widely used in some occasions when Zhengdou needs to transmit signal or power supply.

Specific uses include:

1. Rotate the camera: The slip ring motor can be used to rotate the camera, so that the camera can rotate without restrictions, so as to achieve a wider shooting range.

2. Rotating platform: Slip ring motor can be used to rotate the platform, so that the platform can rotate without restrictions, so as to achieve a wider range of applications.

3. Robot: The slip ring cavity grinding motor can be used in the rotating part of the robot, so that the robot can rotate without being restricted, so as to achieve higher flexibility and precision.

4. Medical equipment: Slip ring motors can be used in medical equipment, such as operating tables, X-ray machines, etc., so as to achieve a wider range of applications.

Slip ring motors are widely used in situations where signal or power needs to be transmitted, which can make the equipment more flexible and efficient.

Slip rings are mostly used in high-end industrial electrical equipment or precision electronic equipment with multi-functional, high-performance, high-precision, and multi-dimensional continuous rotary movement.

Such as: aerospace equipment, radar communication equipment, medical equipment, automatic processing equipment, smelting equipment, mining equipment, cable equipment, amusement equipment, display equipment, intelligent cameras, chemical reactors, crystal furnaces, wire stranding machines, windmills, robotic arms, robots, shield machines, revolving doors, measuring instruments, model aircraft, special vehicles, special ships, etc.

Slip rings provide a reliable energy and signal transmission solution for complex movements in these electromechanical devices. It can also be said: slip rings, which are the hallmarks of advanced intelligent sports equipment.

The function of slip rings is to communicate and transmit energy and signals to rotating bodies. Slip rings are also known as rotary electrical interfaces, electrical rotary joints, according to the transmission medium to distinguish, slip rings are divided into electric slip rings, fluid slip rings, smooth rings, slip rings are usually installed in the center of rotation of the equipment, mainly composed of two parts: rotating and stationary. The rotating part connects the rotating structure of the device and rotates with it, which is called the rotor, and the stationary part connects the energy of the fixed structure of the device, which is called the stator.

The function of slip rings is to communicate and transmit energy and signals to rotating bodies. Slip rings are also known as rotary electrical interfaces, electrical rotary joints, according to the transmission medium to distinguish, slip rings are divided into electric slip rings, fluid slip rings, smooth rings, slip rings are usually installed in the center of rotation of the equipment, mainly composed of two parts: rotating and stationary. The rotating part connects the rotating structure of the device and rotates with it, which is called the rotor, and the stationary part connects the energy of the fixed structure of the device, which is called the stator.

First of all, let's take a look at the description of the conductive slip ring:

What is a conductive slip ring?

Conductive slip rings are commonly known as collector rings, slip rings, rotary slip rings, electric slip rings, rotary joints, return rings, collector rings, commutators, etc., it is an electrical equipment composed of a set of rotors and stators that can be rotated relatively, which can transmit the electricity or electrical signals on the abutment to the rotating workbench through the conductive slip ring, so as to realize the 360 degree arbitrary rotation of the rotary workbench without winding.

What are the application areas of conductive slip rings?

With the development of science and technology, the application range of conductive slip rings is getting wider and wider, and now conductive slip rings are mainly used in monitoring systems, revolving doors, robots, packaging machinery, reactors, winders, wind power generation equipment, medical equipment, CT machines, automation equipment, aerospace, centrifuges, early warning antennas, CCTV and camera mounts, radars, inertial navigation systems, etc.

Conductive slip ring belongs to the application category of electrical contact sliding connection, it is also known as collector ring, or rotary joint, rotary electrical interface, slip ring, collector ring, return ring, coil, commutator, adapter, is a precision transmission device that realizes the image, data signal and power transmission of two relative rotating mechanisms. It is particularly suitable for applications where there is no restriction on continuous rotation and at the same time it is necessary to transfer power or data from a fixed position to a rotating position.

It is used in the place where the power is turned on. Take a look at Shenzhen Jinnan Kinetic Energy has a professional introduction.

Conductive slip rings are 360° rotating, as long as a product needs 360° rotation, conductive slip rings need to be used, such as high-speed domes, radars, etc.

It was first used on the security monitoring ball machine, and then gradually applied to many automation equipment, rotating equipment and aerospace, in short, the equipment needs to rotate to transmit signals where conductive slip rings are needed.

Slip rings are used to transmit power and signals, and their main characteristics are their service life and reliability.

Slip rings, also known as conductive rings, slip rings, collector rings, and busbar rings, are used to provide electrical connections between the rotating parts of the equipment and the fixed parts, and solve the problem of winding with wires, especially when there is no limit to 360° rotation. It can not only transmit power, but also transmit signals, and the special anti-interference design can ensure the stable transmission of various weak signals. Due to the increasing number of functions required by modern equipment and the increasing degree of automation, conductive slip rings are increasingly used in various industries.

Jingpei Electronics has been combining its own development conditions, constantly improving the system, standardizing the standardization of operations, using advanced industrial equipment, strict process control, continuous learning and innovation, and constantly improving and improving in production equipment, process parameters, processing methods, processing processes, product assembly and product packaging, etc., and has become the leader of the slip ring industry.

Keep improving, keep innovating", Jingpei production of conductive slip rings not only stable performance, long life, maintenance-free, but also fully meet the special requirements of different application fields, such as IP68 high protection level, explosion-proof, vibration-resistant, impact-resistant, high and low temperature resistance, high voltage resistance, low electrical noise, very low signal transmission loss, etc.

Jingpei slip rings have been widely used in military fields such as sea, land, air, space, armed police and security, industrial automation, electric power, instrumentation, aviation, transportation, construction, wind power, robotics, medical and other cutting-edge civil fields, providing 360-degree electrical rotary transmission solutions for nearly 5,000 enterprises around the world.