-
1. You can reinstall the system according to your needs in the C disk, and do not move to the data of other disks.
2. Different files are stored in different areas, and files that are not often modified are placed in one area, which can reduce the generation of disk fragmentation.
3. It is easy to classify and manage, and the folder is easy to be renamed and deleted by mistake.
4. If a certain area is poisoned, it can be formatted directly without affecting other partitions.
5. If you want to back up a certain area, you can use ghost to back up the partition, which is simple and easy to operate.
6. Use the same computer for multiple people, and each person manages each person's partition to avoid being messed up by others.
7. Different partition formats can be set to increase security.
8. You can encrypt a certain area (the entire area is your private space, and use the form of a folder, and other content will occupy your privacy space).
9. In this case, the disk partition is damaged and cannot be read or written, at this time, you divide multiple areas, which will minimize the loss.
10. The operation time (formatting, backup) of small partitions is short, the efficiency is high, and it is a large partition at every turn.
11. If a certain area is damaged and you want to kill it again, the data can be moved to other areas for temporary storage. If it's just an area, you still need to find another hard disk to put your data!
12. The partition is relatively speaking, and the small hard disk is divided into two areas, C and D!
The main storage device for storing information in the computer is the hard disk, but the hard disk cannot be used directly, and the hard disk must be divided. In traditional disk management, a hard disk is divided into two main types of partitions: primary partitions and extended partitions.
The main partition is a partition that can install the operating system and can boot the computer, so that the partition can be directly formatted, and then the system is installed and the files are stored directly.
-
Hello, glad to answer for you. Why Zoning Planning Must Be Cautious Related Information 1Let's first take a look at the current situation of the administrative divisions of our province.
At present, many cities in Shanxi are "one city and one district", for example, Jinzhong City has only one Yuci District; There is only one Xinfu District in Xinzhou City; There is only one Lishi District ...... in Luliang CityMost of these administrative divisions arose in the historical period of "withdrawing land and establishing cities". Today, decades later, because of the lag of administrative division, the urban framework is too small, and the extension space is insufficient, resulting in the central city function of the area where it is located cannot be reflected, and these drawbacks have gradually become "prominent problems restricting the urban development of our province". Therefore, "comprehensively improving the management level of administrative divisions" has become the top priority to solve this outstanding problem
As Governor Lou Yangsheng said, "Urbanization is the only way to achieve high-quality transformation and development, we must maintain historical patience and strategic determination, follow the law of development, conform to the trend of the times, work hard to accelerate the afterburner, improve quality and efficiency, accelerate the expansion of urban space, strengthen urban functions, and improve urban quality." Extended Material 1First, we must "look ahead and look backward".
Most of the administrative regional planning has a historical evolution, which is inextricably linked with the local economic development, resource environment, human history, topography and landform, and improves the scientific and forward-looking nature of the administrative division adjustment plan, so as to "achieve not only to enhance the function of the regional center city, but also to build a high-quality city suitable for living, working and traveling, and to promote high-quality development." ”
-
C disk. Operating system.
Partition size: 50g
Because there is activity, such as cache files, temporary files, etc., will be in the system partition) D drive application software.
Partition size: 100g (depending on your personal situation, the software is not too much and can be smaller.) E disk film and television entertainment.
Partition size: 120g
Partition size: 30g
-
1. Right-click the "My Computer" icon on the desktop, and open "Management" - "Storage" - "Disk Management" in turn, then you will see a black bar of "Unassigned" in the "Disk 2" window at the bottom right (because I have two hard disks installed in the computer, the mobile hard disk is displayed as "Disk 2", if there is only one hard disk in the computer, the mobile hard disk is displayed as "Disk 1"), that is, the hard disk that has not been partitioned.
2. Then right-click on this hard disk, select "New Disk Partition" - "Primary Disk Partition", and then select Next.
3. After the "New Disk Partition Wizard" appears, the size of the main disk partition is the size of the first partition of the mobile hard disk, which can be arbitrarily specified, if it is only divided into one area, the "maximum disk space" can be specified as the partition size. Now I'm going to divide it into three zones, and the partition size is specified at around 305243 3=101748.
4. Specify the "Drive Letter and Path" and select Next.
5. In the "Format Partition" option, select the second item "Format this disk partition according to the following settings", at this time, you can choose FAT32 or NTFS format partition, if the partition capacity is greater than 32G, only NTFS is optional. The default value is the Partition Unit Size, and the Label can be any partition name. Select Perform Quick Format, otherwise it will take a longer time.
6. "Next" - Finish". Once formatting is complete, the first partition is now in good blue condition.
7. After dividing the main disk partition, the remaining capacity is divided into extended partitions.
8. It should be noted that you do not need to set the "partition size" when setting the extended partition, and you can directly "Next" to "Finish".
9. At this time, the extended partition is displayed as the free space of the green bar (the size of the hard disk is different).
10. Then divide the logical partition in the extended partition. Right-click on the extended partition and select "New Logical Drive" and proceed until the "Specify partition size" option. I'm going to divide the portable hard drive into three equal zones, and now I have a primary disk partition, so I need to divide two logical partitions in the extended partition, so the "Specify partition size" is set to 101748.
11. The following operations are the same as the steps for dividing the primary disk partition. The logo color of the logical drive is blue.
12. Finally, use the same steps to set the remaining extended partition space to the second logical partition, and the mobile hard disk will be divided into three partitions after completion.
13. After the partition is successful, you can see the three drive letters of the mobile hard disk in "My Computer".
-
C disk 32G fat32 maximum capacity, does not affect the installation of XP or Win7 [I installed XP, the lowest used 6G, but do not install anything].
Three logical partitions: file 100G, program 100G, entertainment your C disk is basically OK, D disk is recommended to expand some more, such as 32G FAT32 maximum capacity, FAT32 or NTFS are OK,
-
The closer you are to the system area, the faster the response.
-
No, the scientific partition method is the atmosphere, 3, 4, 5 or 6 zones, less is not good, more is not good, C disk arrangement 25G is the most scientific, your hard disk has 2 T, I think you are divided into 6 zones is the best solution. The partition is ready, and when formatting, the format is selected as NTFS hard disk read speed comparison.
Also, why do you have to use Windows XP SP2? Now it's all Windows XP SP3, which is an upgraded version of Windows XP SP2.
I suggest you get it this way:
First of all, take down the parallel port plate and install the serial port 160g. >>>More
How to partition hard drive under Windows 7 or Vista.
Note: This article describes how to partition a disk under Windows 7 or Vista, please back up important data before partitioning, for HP notebooks with pre-installed operating system and HP software, partitioning may cause some features to be unavailable. Please make a system recovery disc before partitioning. >>>More
No, it's normal to have fewer partitions. All those who say 80G are about 78, and how many G they say are close to that, and you say that it is impossible to only have more than 50, only 1G 3G can be different, and each hard disk partition is different, but the difference is not big.
Run the diskgenius software (**The address is in the references), find your hard disk (pay attention to the hard disk model and capacity), right-click on it, select Search for lost partitions (rebuild partition table), and then you will find your previous partition, after the search is completed, right-click on the hard disk again, select Save Partition Table, and then open my computer, your previous partition should come out, and the data is the same as before, you can also use this software to partition, delete the original partition first, Then just create it, it's very simple. Good luck!
In traditional hard disks, the order of division is the same as the order you actually use, so if a partition has a bad sector, then it is on the corresponding hard disk track of that partition. >>>More