About the problem of mobile phone and TV, projector screen interchange, understand! 5

If your phone supports MHL HDMI, you can try the following steps to connect to your TV and output the picture to your TV.

1.Prepare an HDMI adapter, a standard HDMI cable, and a genuine charger for your phone.

2.Connect one end of the HDMI cable to the TV's [HDMI IN] port.

3.Connect the other end of the HDMI cable to the adapter, and connect the other end of the adapter to the phone and the power supply.

4.Switch your TV to HDMI mode.

5.After the above operations are completed, the TV will display the picture on the phone synchronously.

If your phone is disconnected from your TV with an HDMI cable, please restart your phone and TV or change to another HDMI cable to reconnect it.

The projector is not wired, and there is no way.

LED chipset** plus a homogeneous version.

First connect the projector and the mobile phone to the same wireless network, then open the software in the mobile phone that needs to be projected, and then click the projection button to select the projector.

You can use the wireless screen device to have a good conversion, and you can also use the same screen with your own mobile phone.

Open the projection software of the mobile phone and the projector, find the corresponding projector model in the mobile phone, and click to connect. If the mobile phone comes with wireless screen projection, you can find the corresponding projector model in the mobile phone.

Tool: iphone11

Version: iOS

1. Enter the main interface of the projector and click the setting options on the interface.

2. After entering the settings interface, click on the wifi inside to connect to the wifi at home.

3. Then go back to the main interface and click My Apps.

<>5. Turn on your mobile phone wifi and connect to the same wifi as the projector.

6. Then tap to turn on the airplay mirroring function of your phone.

7. Select"Letou e6", so that after the sub is connected, it will be fine.

Mobile phones and TVs can be on the same network, through third-party software....For example, iQiyi, you can choose to cast the screen on it....

Dear, are you an Apple phone or an Android phone?

Questions. Android.

How to cast the screen of a TV mobile phone.

Steps to cast the screen: 1. Connect the mobile phone and TV to the same wifi to keep them connected to the same network; 2. According to different mobile phone models, swipe the mobile phone screen to call out the control center page; 3,Click Screen mirroring,Select the corresponding TV name,Complete screen projection。 You can also select the content you want to watch in the corresponding **app,Take Tencent**as an example,Click on Tencent**You**want to cast the screen**,Click the TV button in the upper right corner,Select the name of the TV you want to correspond to。

If you don't want to use the projection function that comes with your phone, you can also **Third-party software, method:1Mobile phone and TV respectively**Lebo projection puts TV and mobile phone under the same wifi。

3.Open the Lebo projection screen on the TV and select the mobile screen projection page. 4.

Hope it helps!

Questions. It's the same wireless network but can't be found.

That's what I use at home, and it's easier to use. Questions. Good.

Hello, dear. To project your phone to your TV, here are a few things you can try:

1.HDMI connection: If your phone and TV both have HDMI connectors, you can use an HDMI cable to connect them.

Plug one end of the HDMI cable into the TV's Nian Ming HDMI input port, plug the other end into a mobile phone adapter that supports HDMI output (such as an MHL adapter), and then connect the adapter to your phone. Select the appropriate HDMI input source on your TV.

2.Wireless screen mirroring: Many TVs and smartphones support wireless screen mirroring, such as miracast or airplay.

Make sure your TV and phone are both under the same Wi-Fi network, then turn on the wireless display or screen mirroring feature on your TV. Find the wireless screen casting option on your phone and select your TV as the screen casting device. This allows you to project the content on your phone's screen onto your TV.

3.Use a dedicated device: If your TV doesn't support wireless projection or HDMI connectivity, you may want to consider using a dedicated projection device such as Google Chromecast or Apple TV.

These devices can connect to your phone via Wi-Fi and stream the content of your phone screen to your TV.

Please note that the specific connection and setup steps may vary depending on the brand of phone and TV you are using. It is recommended to refer to the user manual of your mobile phone and TV, or search for the projection guide of a specific device on the Internet for detailed operating instructions.

Hello, dear. To cast your phone to a Sony TV, there are two ways:

Method 1: Use the Miracast (also known as "wireless display") function.

Steps:1Confirm whether the "miracast" function of Sony TV is turned on,If not,The opening method is:Remote control input signal miracast is on。

2.Turn on your phone's "Wireless Mirroring" function, and find the Sony TV's "Miracast" device to connect.

3.At this time, the mobile phone screen will display the information that it is successfully connected with Sony TV,The screen of the hand and the screen of Sony TV have completed the synchronous display。

Note: To use the miracast function to cast the screen, you need to make sure that your mobile phone and TV support the miracast function and that the distance is not far away.

Method 2: Use a Chromecast device.

Steps:1Make sure that your Sony TV has HDMI enabled and that your Chromecast device is equipped with an HDMI port.

3.Open the app you want to cast (e.g., **, ****, etc.) and start casting via the "chromecast" button or menu option inside the application.

4.On your TV, you can directly ** the content on your phone and control it.

Note: To cast your Chromecast device, you need to make sure that your TV and phone are connected to the same local area network.

Preparation: paper box, paper clip, mobile phone, magnifying glass, tape, utility knife, pencil.

The specific steps are as follows:

1. First of all, prepare the materials, paper box, paper clip, mobile phone, magnifying glass, tape, utility knife, pencil.

2. Next, place the magnifying glass on the side of the shoebox and tailor the size of the circle at the installation position.

3. After drawing, use a utility knife to cut a translucent hole along the line.

4. Place the magnifying glass, glue it with tape, and if you want to be more beautiful, you can cut off the handle of the magnifying glass.

5. Use a paper clip to make a mobile phone holder, the function is to hold the mobile phone and position it inside the shoebox, in order to avoid scratching the mobile phone, you can stick a layer of tape.

7. Adjust the position of the mobile phone in the shoebox so that the clarity of the mobile phone projection on the wall is the best, then the position of the mobile phone in the shoebox is the best.

The steps are as follows:

1. The first step is to prepare materials and tools, you need a large-screen mobile phone, a shoe box with at least one large and one small, a high-transparency magnifying glass, a used transparent tape paper ring, transparent tape, scissors.

2. Dig a hole in front of the big shoebox, and compare it with a magnifying glass and a transparent tape paper ring before digging the hole. Make a mark with a pen and then punch the hole with a sharp knife to cut off the magnifying glass with a knife.

3. After the lens hole is laid, you need to make a strip for adjusting the focal length, dig a gap between the height and width of the shoe cover behind the shoe box (generally a women's shoe box), leave it as a pullable and sliding track, and make a millet fixed bracket inside (you can do it with the remaining half of the shoebox), the method is very simple, that is, use another shoebox, card it to the shoe cover made before, and then cut off the other half of the shoebox and glue it into a base with transparent adhesive strips, as shown in the figure.

4. Next, the lens of the projector will be installed, install a paper ring of used scotch tape in the shoebox, stick it with adhesive strips, and then glue the magnifying glass in front of it, so that the lens is ready.

5. Place the phone on the base and close the shoe. Pay attention to focusing when projecting, when focusing is to pull out the cardboard embedded in it, because the screen brightness of the mobile phone is different, it is best to adjust the brightness of the mobile phone screen to the brightest, so that the projection effect will be better.

6. The projection effect is as follows.

If you want to buy a mobile phone projector, **there are those for sale, you can search for it. However, the effect will definitely not be too ideal,Now the home network projector on the market is not expensive,1990Yuan is fine。 There are a lot of functions,XGIMI TV is such a product,But XGIMI is a bit expensive to 2999element,There are a lot of similar products。

The mobile phone is projected onto the wall, and you can easily make a projector with your mobile phone, and you can watch movies at home.

This feature is not available on mobile phones on the market at present, and we will see if there is such a technology in five years.

The first type: wireless screen projection on mobile phones

Now most of the more ** smartphones have a wireless screen projection function, but the disadvantage of this method is that if your current network is unstable,**it will be stuck, if the network at home is very stable, don't care! The steps are as follows: 1. Make sure your mobile phone and TV are connected to the same wifi; 2. Turn on the screen mirroring in the volcanic lead TV.

Multi-screen interactive screen projection function; 3. Take Huawei mobile phones.

For example, click [Settings] - [Device Connection] on your phone to enter wireless screen projection, or slide down the notification bar to find wireless screen projection; 4. Find the device name of the TV in your mobile phone and click to connect.

The vast majority of Android phones.

And Apple has integrated the function of wireless screen projection inside the system. Thanks to Android.

There are many kinds, and the names of various manufacturers for screen projection are also different, some are called wireless display, and some are called wireless projection. As long as the TV and the mobile phone are in the same wifi environment,Turn on the projection function that comes with the TV,Open the projection option on the mobile phone at the same time,You can search for TV,Click on the content on the mobile phone after the connection can be directly projected to the TV。

The iPhone is simpler, pull down and pull out the control center, press and hold (or repress) the "Screen mirroring" button, you can see your own TV, you can connect it directly, and disconnecting it is the same operation.

The second:

If you just want to watch a drama or watch**, then it is more stable to choose to cast the screen in the app. At present, all major **software has integrated the projection function,Generally integrated in**device interface,Find the projection button in the **interface,Click to select the TV at home,The content will be projected to the TV。

The third option: with the help of third-party software

If the first two functions are not very easy to use, you can also use some screen projection software to achieve it. Generally, third-party projection software needs to be on the TV and mobile phone at the same time**Projection app,Then scan the code on the TV in the mobile phone app,You can connect directly,But I personally feel that the latency of third-party software is relatively high,It is not as smooth as the system and in-app projection。

Fourth: wired projection

The steps are as follows:

1. Select Type-C to HDMI cable according to the TV interface.

Or Type-C to VGA cable.

2. The Type-C port is connected to the mobile phone, and the HDMI port or VGA port is connected to the corresponding TV interface.

3. Turn on your phone and connect. Compared with the other two connection methods, it is more convenient and stable to use the adapter cable to project the screen, and the applicability is more extensive, and in addition to projecting the screen to the TV, you can also project the mobile phone computer with the Type-C interface to the projector.

Plug and play, driver-free! High-frequency signal transmission, clearer picture quality! It can also be adjusted to dual-screen expansion mode, multi-task split-screen operation to solve different needs!