Hurry A newbie wants to reinstall the computer

Buy a $5 system disc and put it in a CD-ROM, if your computer is set up to boot from disk. Then you can read it when you turn it on.。。 Then select 1 directly, that is, the system will be automatically installed to the C disk.

Fully automatic, you just have to wait for the automatic installation.

If you don't set it to boot from CD-ROM, your computer won't be able to read the disk, so you need to set it in the BIOS.

Just a few dollars for a pirated version, buy it back and put it in the CD-ROM drive to run, just do it according to the prompts.

10 yuan can also be used No, you can create a ghost ISO image file on the Internet, and then use a virtual optical drive to install it, it's also pretty fast.

The disc is cracked, absolutely not, go buy a pirated disk, it's about 5 yuan, the hard disk is installed, it's more cumbersome for you, it's not recommended, if you have an XP system, you can buy a ghost XP disk, if you use windowsXP, you want to back up the computer drive.

Buy one, I'll sell it here for five dollars. Put it in the optical drive, turn it on, and then press and hold the F2 key or F11 key or F12 until the options with HDD and CD words appear, select the CD word, and press Enter. After that, it's all foolish.

1. Buy the version of the CD 2: Set the CD drive to start 3, select the installation system item 4, wait for 5 to complete.

It's best to buy one, generally not too much is more than a hundred.

You go and buy an XP SP3 of up to $10 and now there are a few with genuine ones.

1. Borrow or go to the computer monopoly, audio and video monopoly store to spend 4-5 yuan to buy Ghost XP (SP2 or SP3) system CD, use this kind of CD to install the system, in addition to the system files, but also integrate a large number of hardware drivers, set up the CD-ROM to start, put in the CD-ROM, delete all the files in the original C disk, do not make any changes to other partitions, about 15 minutes to complete the installation, it can run normally, generally will not lack any driver. Note: Before installation, move the files that need to be saved in the C drive to another partition.

2. Set the optical drive to start.

Award BIOS settings.

Reboot, press Del to enter the BIOS, find the Advanced BIOS Features and press Enter to enter the Advanced BIOS Features interface.

Find First Boot Device, turn the page with PGUP or PGDN to change HDD-O to CDROM (Optical Drive Boot), press ESC, press F10, press Y, press Enter, save and exit.

AMI BIOS settings.

Start the computer, press del to enter the main interface of the AMI BIOS setup program, use the arrow keys to find "Boot" in the upper menu to select, press Enter, use the arrow keys in the open interface to check "Boot Device Priority", press Enter, select "1st boot device", press Enter, enter the Options interface, use the arrow keys to select and set to "cd ***:3s-ph.".(Optical Drive Start)", so that it is reversed white, press Enter, in the "Options" dialog box, move the arrow key to the top, so that it is reversed, press Enter, press Esc, press F10, press Y, press Enter, save and exit.

The default notebook is the optical drive boot, and the ones that have been changed can be changed again. Start the computer, press F2 (Lenovo) to enter the main interface of the AMI BIOS setup program, find "Boot" in the upper menu, press Enter, set the CD-ROM Drive (CD-ROM Drive Boot) with the keyboard + and - keys at the top in the open interface, press F10, then press Y, press Enter, save and exit. Insert the XP system disc, reboot, and press any key to open the disc.

3. Disc installation.

1. Put the disc into the optical drive, restart it, and see the CD ...... appear at the bottom of the screenWhen the word is written, press any key in time, otherwise the computer will skip the light and start from the hard disk again.

2. Use the arrow keys on the keyboard to select "Install XP system to the first partition of the hard disk" and press Enter.

3. Enter the copy installation interface, the following is automatic, don't move anything, if you don't want to install some drivers, you can manually select the process roughly: display the copy progress, restart, automatic installation driver, XP installer, please wait (take a long time, wait patiently), the last task is being executed, automatic restart, and enter the desktop after displaying "Welcome".

4. Manually set the monitor resolution and refresh rate, and you're done.

Buy a disk, put it in the optical drive, after booting it is full of Chinese prompts, choose to format the C disk, and install Windows. Can. It's very easy, the first time I installed it, I put it in the tray and pressed it according to the prompts. It's not as complicated as you think.

Buy a pirated image XP disk, then boot it and put it in the optical drive, and click on the first one.