Urgent! Urgent! Urgent! Urgent! Urgent! I can t play any games on my computer!

Wouldn't you just change the host?

First of all, take a look at what the prompted program is, it may be that there is a problem with this program, if it is uninstalled and reinstalled. If there is a prompt at boot, you can remove the boot start of this program. If you can't find out or prompt not the program is the system process, you can recall, when you have this kind of failure, what program software, plug-ins, patches or drivers did you have, if you want to uninstall them all first try (if it is a prompt when opening the game, it may be that there is a problem with the game itself, and the game is not compatible with your system, and the graphics card driver is not suitable, etc.).

If you can't find it, it is recommended to check and kill the Trojan horse and repair the system.

1. Please use the system restoration that comes with the system, restore to the time when you do not have this failure to repair (or use the restoration software to restore the system, if you can't enter the system, press F8 to enter the safe mode to restore the system).

2. If the fault persists, use the system disk to repair, open the command prompt and enter sfc scannow enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically repair it.

3. If the fault persists, set the optical drive in BIOS as the first boot device, insert it into the original system installation disk, press the R button, and select "Repair Installation".

4. If the fault persists, it is recommended to reinstall the operating system.

Use the system that comes with the system restore method:

The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore (win7 restore the system, in the control panel then the device and security sub-option and then the backup and restore sub-option).

Please don't steal my answer!!

Plan 1 [New P].

Note [Original]:

1 In safe mode, the effect is even better!

2.All the software to be used below should be installed or upgraded to the latest version to ensure the effectiveness of use.

3.It is not antivirus, and the following methods can be used directly. If it doesn't work, use a high-quality antivirus (e.g. Kaspersky) in safe mode to kill it, and it's best to use 360 Security Guard as well.

Use 360 Security Guard's "Trojan Horse" - Full Scan". Kill and restart. ）

You don't have to use all of the following methods, you can try them one by one. Sometimes, just the first one works.

One. Close the browser, open the "System Repair" of the new version of 360 Security Guard, and select "Home Repair", "System Repair" and "IE Repair" as a tick (you can also select all.) At least select "System Repair"), and then click "One-click Repair".

Too lazy to install it, just use the 360 first aid kit) .

Then use the 360 first aid kit. [Follow the steps: "Start First Aid" first; After scanning, if a Trojan horse appears, click "Isolation"; Then click "Repair" (you can select all of them to Fix Now".

Next, click on "Recover Lost DLL Files", add the missing DLL files that the system detected during detection, and then click "Repair Now". Repair Network is a case-by-case decision to fix or not. When you're done, you should restart.

Two. Scan with 360 Security Guard's "Clean Plugins" to clean up malicious plugins. When you're done, you should restart.

Three. Use Windows Cleanup Assistant (from the web**). After scanning (if you sweep things out, check them all and clean them), then use Fault Repair (select all), and then right-click on the desktop to refresh. Works well in safe mode.

You can also consider using the Kingsoft First Aid Kit [After point scanning, if there are items that can be repaired, after selecting all, point repair can be done. 】

Emphasis ---1In the repair, when there is a prompt in Kill Soft or 360, please click Allow. Restart the computer if prompted to restart during operation.

2.When the effect is not good, look at the three points in "Attention". 3.

After that, if the effect is not good, you can also consider system restoration (choose a restore point).

This is an illegal shutdown or other reason caused by the disk damage, please repair it (fix each disk or only fix one of the Cs prompted).

Built-in disk repair method:

The specific steps are as follows: select the drive letter c in my computer, right-click the right mouse to select the properties, select "Tools Start Checking" in the pop-up drive properties window, and select "Automatically repair file system errors" and "Scan and recover bad sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing it according to the above method, a box will pop up, the point is, repair it at boot after automatic shutdown, win7 select the disk check button according to the plan).

Bad sectors on the hard drive will lead to corruption or loss of computer system files, computer failure to boot or freeze. Hard disk bad sectors can be repaired using NDD Disk Utility or Scandisk.

If the fault persists, please restore the system or reinstall it (it is still not possible to format the hard disk and repartition and reinstall it, if it doesn't work, you will have to replace the hard disk, or overhaul it).

Find a way to enter the system to repair the disk, enter, wait a while to try, boot and press F8 to select safe mode, PE, reinstall the system, and go to the repair there to help you.

If it only appears once, it won't come out next time, don't mind, it means that the system repaired the fault by automatically.

It should be an abnormal shutdown or power outage.

This is a disk self-test, just wait for it to be detected.

It's okay, wait for it to be done automatically in all 5 items. You don't interrupt, or it will appear next time you turn it on. After the automatic completion, the next boot does not appear, if it does, it means that your hard disk has bad sectors.

I've had this situation and I went to ask for two reasons:

1.There is a problem with the part;

2.A sudden power outage causes this.

Is it an abnormal shutdown? Check it out when it's done!

It's okay.,It's a system error.,This is to check the disk where your system is.,See if there's any problem that causes the system to go wrong.,It's good to check it by default.,There's no harm,

It doesn't matter, the reason is the abnormal shutdown last time, etc., and when he finishes checking, that is, it will be normal after checking.

After waiting for % to 100, you can turn on after a while.

There is a problem with the hard disk, and if you want to reformat it, the system will not appear if you reinstall it.

There's a problem with the system, let's reinstall it.

The cause of web page errors (script errors), Sakura has several situations that can cause this phenomenon:

4.There is an error in your IE cache, please close all browser windows first, then right-click on the desktop Internet Explorer, select Properties, and in Constant.

On the page, click on the Delete Files button, select Delete All, and click the Delete cookies button.

You can refresh more, or change the network speed to access when the speed is relatively good (provided that this **is a big **, there will be no problem 2).

Most of the normal systems are due to cause 4. Follow Step 4. d

In addition, the last suggestion, please do not install IE7, IE8 browser, if installed, please go to the control panel as soon as possible, add and delete the program, and find.