How to install the dash cam and how to route the line? I want to implement hidden routing.

The installation of the recorder is generally about the same, like the charm of the car recorder I use is to use 3M glue to glue on the front windshield, and then bury the line into the gap between the front windshield and the ceiling, and then bury it in the soft rubber of the A-pillar, all the way down to the bottom of the footpad of the passenger seat, insert the cigarette lighter, so that the hidden installation is basically realized.

There are many forms of dash cams, there are the kind that are directly adsorbed to the windshield, and there are the kind that cover the rearview mirror in the car, but the wiring is basically the same, generally the line is stuffed into the ornaments in the car, sometimes you may need to use tools, through the upper part of the windshield, to the co-pilot's A-pillar part, and then down, through the co-pilot's storage box, to the power supply, if you have a strong ability to do it yourself, you can come by yourself, if the ability to do it is average, it is recommended to find a professional.

The cigarette lighter I walked through the glove box on the co-pilot's side, went up to the windshield eaves along the A-pillar of the co-pilot's car, and then wired it in the direction of the middle rearview mirror, and connected it to the dash cam. Note: The wire should be stuffed into the sealing strip with a plastic crowbar, which is more beautiful.

It's not very clear, I don't know if it can help you.

Many cars will be equipped with dash cams, one is to monitor the driving process in real time, and the other is to record evidence in the event of an accident or porcelain bump. The more troublesome thing to install the driving record with orange instrument is the running line, and it is necessary to run the hidden line. If the lines are not well run and exposed, it will affect the aesthetics.

What is the installation route of the dash cam? The following is a schematic diagram of the dash cam hidden line.

There are front single cameras and front and rear dual camera dash cams, front and rear dual camera shooting is more comprehensive, can record the rear of the vehicle, and the installation is also the most troublesome. The most important and troublesome installation of the dash cam is the wiring, and the electric code source line of the dash cam needs to be arranged according to a certain route.

First of all, it is necessary to repair the dash cam. The suction cup is fixed between the mirror and the front windshield**, and the snap-on type is fixed directly to the mirror. Then insert the dash cam power cord along the edge of the ceiling where it intersects with the glass, then along the edge to the A-pillar, then the door frame seal and the bottom of the storage box, and then insert the dash cam power cord into the gap along this line, and finally into the car cigarette lighter.

This is the route of the active dash cam and can be well hidden. For front and rear dual-camera dash cams, the route of the rear camera is more troublesome. There are generally two types of rearview cameras in dash cams, and the installation methods are different.

One is attached to the middle above the rear glass, and the power cord is attached to the door beads along the cab, all the way back behind the seats, and then into the trunk and along the edge to the rear window.

The other is mounted on the license plate lamp cover and can be used as a reversing image. The power cord runs along the edge of the ceiling on the side of the passenger seat. But in the back, it is necessary to go through the trunk, run along the edge of the trunk, and then install on the license plate lamp cover.

Dock the rear recording extension cable with the rear recording camera, fix the excess wire with insulating tape, and then insert it back into the top cotton of the trunk to adjust the camera angle.

Pacific Automotive Network ().

Millions of car purchase subsidies.

The dash cam is an important object to protect the rights and interests of car owners, protect their own rights and interests, prevent touching porcelain, and restore the accident scene in time, so it is very important!

Many people will install a dash cam in the car, the dash cam is generally divided into a single camera lens single recording and dual lens dual recording system, a single camera lens single recording dash cam is more common, only ** record the situation in front of the vehicle, the installation is relatively simple. And the most important thing to install tachograph is wiring, and the power cord must be arranged according to a certain line, otherwise the exposed cable will affect the overall beauty and generosity. So how to install a dash cam and track it?

Let's take a look.

Dash cams are fixed by strong suction cups, and they are also rearview mirrors. Suction cup dash cam must be sucked in a reasonable position, rearview mirror dash cam is generally clip mobile type, can be set on the original rearview mirror at the same time. Put the power cord along the edge of the canopy to the A-pillar, followed by the door frame sealing strip, then the bottom of the storage box and the inside of the blanket, put the power cord in according to this line, and finally plug it into the car cigarette lighter.

For some car buyers feel that installing a dash cam is an annoyance, especially the dash cam that shoots before and after, left and right, in order to be better and more convenient, they will go to the store to find a professional to install it, and they must pay some wages. There are some stores reported that the tachograph installation fee is 150 yuan, which is obviously expensive, and the installation fee of the general tachograph is within 100 yuan, after all, the actual installation is not complicated, and it is expensive if it is higher than 100.

How to hide the wiring of the dash cam, I believe that many friends who love cars are very interested in it, and I will share it with you below, I hope it can help you.

The cable that connects the camera should first be laid along the gap between the roof and the front windscreen.

The wires are then routed to the A-pillar and to the B-pillar via the sealing strip around the door frame.

Lift the floor pad under the co-pilot's seat, press the excess line under the foot pad, and finally connect the line to the center console in front of the Jel.

Whether it is a traffic accident or a "collision" during driving, the dash cam can become the evidence that we get rid of responsibility or protect our rights and interests to ensure the safety of our vehicles. Such an important dash cam, would you install it yourself? Do you know how to install the wiring of the dash cam?

Today I will talk to you about how to install a dash cam.

First, the tachograph installation location.

It is recommended to install the dash cam next to the rearview mirror or to the right, so that it does not affect the driver's vision, but also whether the dash cam is working normally at any time, and can also expand the recording range, killing multiple birds with one stone.

Second, the dash cam wiring.

1. Stuff the line of the dash cam into the gap in the roof of the car.

In general, the power cord of the recorder can be tucked into the gap in the roof of the car. However, for some high-end models, or models with good vehicle details, the roof may be directly glued, so you can hide the line in the visor of the co-pilot.

2. The wire is plugged into the gap along the A column.

The wire thrown out at the top can be directly stuffed into the gap between the A-pillar and the front windshield, and it is OK to use tools such as keys and taper changes. Of course, if you want to put the wire inside the A-pillar plastic guard, you need some strength and skill.

3. Follow the door frame or stuff the sealing strip directly.

If the diagram is convenient, you can extend the wire along the door frame. If you are afraid of being squeezed by the door, you can put it in the seal. However, it should be noted that some vehicles have seals attached, so once they are forcibly removed, they may not be able to be installed properly.

4. Hide the excess wire under the co-pilot's foot pad.

Generally, the length of the cable of the dash cam is very redundant, and there are often extra parts, which can be hidden under the co-pilot's foot pad to make the car more tidy.

5. Plug the power supply into the cigarette lighter.

Finally, plug the driving record into the power supply of the cigarette lighter, and the installation is complete.