What should I do if the fatal error is stuck when Windows Longhorn is installed and cannot be instal

The minimum system installation conditions for Windows English beta version are 3G or more in the partition space where the installation system is located, and the minimum PII1G or more and 256M memory have been used when the installation is just completed. The longhorn4074 English beta does not provide an installer under DOS. Windows Longhorn4074 English beta size is 751,360K, so you can't burn it with a CD, because the capacity is not enough, so you have to use a *** recorder to pay attention to this.

The first step collects data, the second step installs the process, and the third step starts the system, and it will restart after the first step is completed, and it will be automatically installed in the future, and you no longer need to participate, compared with the installation of xp, it is much simpler to install the path, computer name, user name, installation language, keyboard type, and time zone. Since this is a beta version, the options shown here cannot be changed from the original 2,490M to the current one. To use the C disk to install the system, now the C disk orange part is selected by default, press the enter key to start the installation, please wait for Windows to be ready to start, this process takes about a few minutes, after startup, the system version will be displayed soon to start installing the driverInstalling the driver is a slow process, and it will boot directly into the desktop after completion.

This problem is very common: not all virtual machines and physical machines can be installed on the beta version of the system, after all, it is a beta version.

Who still uses Longhorn now, a system that is lower than the XP version.

Because ". .The "ISO file" is an optical disc image file, which cannot be directly decompressed by compression software, and must be recorded into a disc with a recorder or a virtual optical drive.

I installed Windows Server 2012R2 in the environment of SCVMM2012 and I had this error, because the default memory was 512M, and it was OK to change it to 1G or more.

Of course, there is a problem with you decompressing the ISO, and the ISO is not RAR, so you can't decompress it directly.

Without unzipping, just use the virtual optical drive to install and try it.

There seems to be no way to solve this problem.

The information you give can't tell what the specific reason is!

Can you write the next version of Vista? That might help you.

Are you saying that the longhorn4001 installer can't be partitioned?

Wrong, I'll tell you a little simpler, I often install the 98 system, and it is difficult for me to be in terms of the system. You enter the BIOS, which is what you said about pressing the F8 key to enter the screen. Select a BIOS in it, and the fifth item is to adjust a CD ROM, then press ESC to go back, and finally press F10 to enter.

Then put the win98 disc into it and select the second, then select the second one, and then press the disk letter that appears above, what disk is the disk, what disk you play, for example, (f:h:) Enter and then play.

Dizzy go buy an automatic installation disk and pull it.

The 98 installation disk is the boot disk, which can start DOS

Two emails with tutorials have been sent to your inbox, with the installation process for various operating systems, you can take a look.

If you don't just put it on the boot disk, you can pull it,

Buy a pirated installation disk with CD-ROM boot, set it in the BIOS to boot from the CD-ROM drive (press del when booting up, enter CMOS, press F10 after changing the first boot to CD-ROM in the second BIOS Advance Feduru), put the disc in the reboot and you're good to go.

Insert the 98 system disk, then press F8, press the command above, and press Enter. Enter.. Get back in again. Finish. Hehe.

You go buy a ghost

It's going to be simpler.

When booting up, press the Delete key (multiple presses in a row), enter the BIOS settings, look for the option of First Boot Device, set it to CD-ROM, press F10 to save the settings and reboot.

Put the 98 system disc into the CD-ROM drive, write down the serial number first, and press anykey to boot from cdrom appears....Press any key to enter the 98 system installation.

Self-check first, then terms of service, press f8 to skip.

Now to start the installation, select the C drive, follow the prompts to reinstall the system on the drive, and format the partition with FAT.

You can put the XP disk in it and format the C disk (be sure to use the FAT32 format, otherwise the DOS will not be recognized.) Then wait for the format to finish.,Reset the computer when installing the xp file.,And then put 98 disks in it.,Perform normal installation.。 XP only supports upgrades, not downgrades, so it can't be installed directly by putting 98 disks.

It can be said that it is the most complete operating system installation**, detailed to every step of the installation. Windows 98 CD Boot Installation Process Details** Windows Me CD Boot Installation Process Windows 2000 Server CD Boot Installation Process Details** Windows 2003 Standard Edition CD Boot Installation Process Details** Windows Longhorn 4074 English Beta Disc Installation Process Details** Windows XP Disc Boot Installation Process Details** turbolinux-7-server CD-ROM installation process details** opendesktop open desktop operating system CD boot installation process details**Co-create desktop Linux 2005 CD boot installation process details**red hat linux 9 disc boot installation process**Red Flag Linux desktop version CD boot installation process**(Red Flag Linux

I wanted to explain, but the above is very clear, so I won't repeat it.

But I'm buying an installation disk.,You can install it directly.,No need to press any keys.。

If it is a new hard disk, you need to start it with a disc, enter the optical drive under the DOS command prompt, use the fdisk command at the prompt of the optical drive, enter the disk formatting, the command will ask you whether you support the large hard disk, whether to divide the entire hard disk into a zone or multiple zones, and you also need to create a dos boot area, set the capacity of the main partition, the capacity of the extended partition, and then set the capacity of other partitions under the extended partition!!

If you don't have a boot disk, XP must not reinstall win98 below

Only disc boot or floppy disk boot can be installed.

You can only install floppy disks or optical discs through the installation disk.

It's not F8, it's after entering the system, and you have to change the BIOS to a disc boot when you boot up. Format the FOTMAT command of the C drive under DOS, and it will be installed automatically.

In fact, installing 98 is about the same as XP.

It's almost the same.,Turn on and press the F2 key.,Start from the disc instead.,And then put it like a disc for installation.。

, install Windows 98

To install the Windows 98 system, you can use the Windows 98 system boot disk to boot the computer, then put the Windows 98 installation disc into the CD-ROM drive, enter the drive where the CD is located in the DOS prompt state, and then enter the Windows 98 installation directory, and run the setup command to start installing Windows 98.

At the beginning of the installation, the installer will automatically call the scandisk program to detect the computer system, and after the detection is passed, it will enter the Windows 98 installer. When the "Software License Agreement" dialog box appears on the screen, click to check the "Accept Agreement" option and click the "Next" button, you will be asked to enter the "Product Key", which is commonly known as the Windows 98 installation serial number, and click the "Next" button to install it when you are done.

The Windows 98 installer goes to the "Collecting information about your computer" interface and checks the system to make sure that there is enough hard disk space to install Windows 98. After completion, you can follow the prompts, click the "Next" button, select the "Typical Installation" method, enter the user name and organization name, enter the user area selection window, the selection of the area is mainly to determine the system time and date of the operating system, you can select "China" in the list, and then click the "Next" button.

During the installation process, the installer will ask the user if they want to create a boot disk, if you don't have your own Windows 98 boot disk yet, then it is recommended to select the "OK" button to create, otherwise click the "Cancel" button. In the rest of the process, we don't have to worry about it, the installer copies the data to the hard disk and completes the final installation process. After the file copy is finished, you will be prompted to restart the computer, after restarting, you can directly enter the Windows 98 installer, and display the remaining time of installation on the left side, wait patiently, you will find that Windows 98 has been installed into the system.

The system is too old, try to install a new one.

Two hard disks, both divided into CDF disks, you set the C partition of one of them as the active partition, but you installed the system on the other C drive without the active partition! Don't worry about using it, next time you want to reinstall, pay attention to the choice!

The current computer configuration, even if you have just bought the computer, it is not recommended to install Vista directlyI can't afford to run even if I really install it.

It doesn't change to RAR format, it's just that WinRAR software can view ISO files, so it shows the RAR icon, you can burn the ISO file into a CD, and then it's the same as installing XP, start from CD, and then gogogo, and it's OK.

ISO is an optical disc image, which should be burned into a disc with a recorder and then installed.

WinRAR will associate the ISO format file to yourself, you can set the unlink in WinRAR.

To burn a disc. I also did it, but the installation was not successful. Not easy to install. I have more than enough configuration. What else is stat to turn on. It's not funny.