What to do if the floor tiles are oily, and how to remove the layer of oil on the new floor tiles

Use a mop and add some oleace to mop. 1. Keep the floor dry and clean, and it is not allowed to wet the mop with water or scrub with alkaline water and soapy water, so as not to damage the brightness of the paint and damage the paint film. If it is dusty or dirty, wipe it with a dry mop or a wrung out wet mop.

Wax once a month (or two months) (wipe off moisture and stains before waxing).

2. In case of heating or other water leakage on the ground, it must be wiped clean in time, and it cannot be directly baked in the sun or electric stove, so as not to dry too quickly and crack the floor.

3. If you don't live on a good floor for a long time, don't cover it with plastic sheeting or newspaper, the paint film will be sticky and lose its luster after a long time, and at the same time, you should not put hot water basins, hot rice cookers and other things directly on the floor, and use wooden boards or straw mats to pad them, so as not to burn the paint film.

4. If there are stains on the floor, they should be removed in time, if there are oil stains, they can be wiped with a rag or mop dipped in warm water or a small amount of washing powder, or they can be scrubbed with neutral soapy water and a little detergent. If the stain is severe and this method is ineffective, you can gently wipe it with high-quality sandpaper or steel wool. In the case of drug, beverage or paint stains, they must be removed before they have penetrated the wood surface, by wiping them with a soft cloth soaked in furniture wax.

If it still does not work, it should be wiped with steel wool dipped in furniture wax. If the surface of the floor is burned by cigarette butts, wipe it vigorously with a soft cloth soaked in furniture wax to restore the shine. If it is stained with ink, it should be wiped with a soft cloth soaked in wax in time, and if it is ineffective, it can be wiped with steel wool dipped in furniture wax.

5. Paint the floor and minimize direct sunlight to avoid excessive ultraviolet irradiation of the paint, which will dry out and age in advance. Furniture placed on the floor should be padded with rubber or other soft objects to prevent scratching of the floor paint.

6. During the use of the floor, if it is found that the individual floor is warped or falling off, the floor should be picked up in time, the old glue and ash should be removed, the new glue should be coated, and compacted; If the paint film of individual floors is damaged or exposed, you can use No. 400 water sandpaper dipped in soapy water to polish, then wipe clean, wait for drying, carry out local color, after the color is dry, brush and apply a paint, dry for 24 hours, polish with No. 400 water sandpaper, and then wipe the wax for polishing.

If it is laminate flooring, it is easier to take care of, as long as it is wiped with a slightly damp mop cloth without waxing.

Use a mop and apply laundry detergent to mop.

Dear, hello, I am glad to answer for you how to remove the layer of oil on the new floor tiles, 1. Daily cleaning of tiles can be cleaned with dish soap, soap, etc. 2. Use soap and a little ammonia and turpentine to clean the tiles to make the tiles more shiny. 3. The polished tile should be waxed regularly, and the time interval should be 2-3 months.

4. If there are scratches on the brick surface, you can apply toothpaste to the scratches, and wipe them with a dry cloth to repair them. 5. The gaps between bricks and bricks can be removed from time to time with detergent, and then a layer of waterproof agent can be brushed on the gaps to prevent the growth of mold. 6. Sodium hydroxide or potassium bicarbonate solution is used for pollutants such as tea, coffee, beer, ice cream, and oil.

7. Ink, cement and other pollutants use dilute solutions such as hydrochloric acid and nitric acid. 8. Use special cleaners for paints, coatings and other pollutants. 9. The rust can be washed with 2% oxalic acid solution, and then wiped with water.

After grinding 3-4 vitamin C tablets into powder, the package is sprinkled on the surface of the floor tiles, and then scrubbed with water several times.

In the past, caulk or white cement were used to repair joints. But their shortcomings are all too obvious. After a long time, it will turn black and fall off. In particular, the grease stain in the kitchen will turn yellow. Greasy ones are hard to clean.

As a substitute for the caulk, the beauty sewing agent has the characteristics of easy scrubbing, dirt resistance, no falling off, and beautiful appearance. It is the first choice for filling gaps by Honda owners, and the beauty joints in the bathroom also have a great effect on preventing water from seeping through the gaps in the tiles.

There is no tile gap to do beautiful seams, just look at the caulk is not the slightest water blocking effect, which is why, the bathroom, obviously waterproof, the wall on both sides of the bathroom will still be anti-alkali, not waterproof is not done, but sometimes the toilet water consumption is large and penetrates into the sand and dust, because there is sand and dust to block the water can not be emptied in time, it will penetrate from the cement sand dust to the wall outside the bathroom to cause anti-alkali, you bathroom to do beautiful seams, you can effectively prevent this situation.

A house is generally lived in for 10 to 20 years, do you want your tile gaps to be as bright as new, or let it go?

Cleaning the surface of the floor and using essential oils can protect the floor so that the discoloration of the floor will not deepen if it is scratched. Method 2: There is no scratch mark on the surface of the polishing wax on the surface paint film or slight damage, and the floor should be directly polished with polishing wax after cleaning, and the scrubbing can be clean.

Polishing wax also has the effect of protecting the floor, protecting the shine of the floor, making the surface of the floor lubricated and avoiding deeper damage to the scratched area. Method 3: Paint This is a way to correct the more obvious scratches, and the floor paint film is damaged or exposed.

This requires sanding and scrubbing the scratches on the floor, then filling them with solid wax, then coloring them with a touch-up pen, and then brushing them with a lacquer coat after the color is dry, and finally polishing them. Method 4: Ask a professional about the scratch damage of a large area of the floor, and our manual correction is ineffective, so we can only ask a professional correction personnel to deal with it.

There is a specialization in the art industry, whether it is renovation or replacement, advocate not to do it yourself, otherwise it is likely that the gains outweigh the losses!

1. Use the floor tile repair agent to repair the tile scratches, use a brush dipped in the repair agent to draw at the scratch gaps, paint again after 30 minutes, and repeat again after drying, until the scratches are reflective from the side, so that the floor tile scratches can be kept clean for a long time after treatment.

2. In addition, the scratches that deeply scratch the brick surface can also be polished with a water mill, but be careful to grind and polish, otherwise there will be pits or greater damage to the brick surface, such as dull and wider scratches.

3. If it is a scratch caused by heavy metal push and pull, it will be more difficult to remove the scratches on the floor tiles, in order to remove the metal scratches on the floor more labor-saving and faster, you can soak it with detergent for 3 minutes and then scrub it, the floor tile cleaner will become loose after the reaction with the metal scratches will be decomposed, and you can wipe it with a wet towel dipped in the detergent a little harder, so that the operation will not have an impact on the surface of the floor tiles, and the luster will not change.

Second, how to clean the floor tiles.

1. Daily cleaning: The daily cleaning of floor tiles can be cleaned with water and detergents, such as detergent, soapy water, etc.

2. Scratch treatment of floor tiles: the floor tile floor should be kept clean frequently, dust and gravel should be removed in time to prevent abrasion of the brick surface, when there are slight scratches on the surface of the floor bricks, a little toothpaste can be applied to the scratches, and the scratches can be wiped repeatedly with a soft dry cloth, and then the floor wax can be applied to make the tiles as bright as new.

3. Special contaminant cleaning: After the surface of the floor tile is polluted, it should be wiped with a soft cloth and rinsed with water, if there are still stains, it is recommended to use detergent to clean.

Rub the flower with 4000 water sandpaper until it is good. [Must be 4000 size, sandpaper for grinding glasses].

One is waxing.

The second is to fill the concave surface with a jade glue (the same color as the original tile).

Third, there are conditions, of course, from the newly laid piece of flowers.

If there is a brick of the same color, replace this brick and it's OK!

First, you can soak it in 84 disinfectant solution for a while, and then see if it can remove the oil stain in the floor tiles.

Second, if there is no change after treatment with 84 disinfectant, it means that the uranium surface layer on the surface of the floor tile is destroyed If you want to restore it to its original state, it is impossible to start the hunger, and then you have to change it to a new one. But it is often the same specification, the same color and brand, and there is a color difference between it and the original, you can first find a piece of color that is not much different, soak it in salt water, and put it outdoors for a period of time.

Warning, if the floor falls on the oil and other liquid substances, it is best to wipe it clean in time, otherwise there will be an infiltration effect, yes, the infiltrated liquid is difficult to get out.