Today I want to upgrade win10 with bear software, and that s it after a while, what should I do?

This page says that the boot file is missing, you need to enter the PE boot disk, click on the partition tool, click on the C drive, click on the hard disk in the upper left corner, choose to rebuild the main boot record, if you still can't get in, then you need to reinstall the system.

Make a boot disk of the latest version of the USB flash drive, and let the computer boot from the USB boot USB disk. Install win10 system.

1. Connect the computer to start the USB flash drive, and set the USB flash drive to start; Run U to start Win8PE2, in the U Start PE one-click installation tool window, click "Browse" to add the system image, install it on the C drive, and confirm.

3. Click "OK" in the prompt box, and then we can see that the program is in progress.

4. When the program ends, there will be a prompt box prompting whether to restart the computer immediately? Click "Yes".

5. After restarting, the computer will automatically install the program, wait patiently for the program to be installed, and the system can be used.

This is an upgrade error, and you need to reinstall the system to solve the problem.

Start the computer and set it to boot from the USB flash drive,This will directly enter the installation interface of win10,The installation prompt can complete the installation of the system。

To do this, you must have an installation disk or a USB flash drive to reinstall the system. In addition, the system is used to support the operation of software programs.,There is no need to upgrade when using normally.,If you like to play, then prepare an installation disk or a U disk boot disk.。

If you can turn it on, you can reinstall the system, if you can't turn it on, you can only use the USB flash drive to make a system disk and redo the system.

1. Right-click on the toolbar and select "Task Manager".

2. Click "Open Service".

3. Find Windows Update and select Disable!!

If it's an insider user upgrading the preview version, or a Windows 10 version upgrade, it's normal to not move when you're preparing to install the update to 23% and 32%, and I've also encountered this problem, just wait 30 to 45 minutes.

If it is a normal update that has not been moved for a long time, then cancel it, reinstall it, and if it always doesn't work, then the update is not suitable for the system.

Generally, it will move after a while, but it is only a matter of time.

Detailed steps: 1. Open Settings. To achieve the personalized settings of all computer software, you basically need to turn on the option of settings, and the specific operation is: click on the icon of the system appearance in the computer start menu, and the left half will display the "settings" option, as shown in the figure:

2. Select "Update & Security", which includes Windows update, security and backup options, that is, to achieve system recovery, upgrade, and security settings, all of them are entered through this option.

3. In the new window that opens, you can view the message of system update, this figure indicates that the system is being updated. However, to check the method and time of system updates on your system and computer, and set it according to your needs, you also need to turn on "Advanced Options" below.

4. Click "Advanced Options" below, there is "Please select the update method" on the new page, click the drop-down menu, select "Automatic" or "Notification to arrange restart", if the computer always restarts by itself after updating, click to select "Notification to arrange restart".

5. If you are not used to the Windows10 system, you can restore to the W7 system through the "System Recovery" on the left, but the premise is that the Windows10 installation is less than a month, and the backup package of the W7 system has not been deleted.

6. The selection will take effect immediately after completion, and there is no need to restart the computer. At the beginning, the windows10 system may not be used to it, but after a few more days, you will get used to it, so you should seriously consider it when you choose to roll back the W7 system.

Try to boot the computer and click F8 continuously to enter the system option, select the last correct configuration to start, and see, if not, restart, select safe mode to enter, and try to use system tool software such as 360 security guard to see if it can be repaired. If you can't enter safe mode, you'll have to reinstall the system. In addition, do not update in the future, because not all computers are suitable for installing this update, the update may cause the card or even damage the system, and there is no need for the general user to update, the system is used to support the operation of software programs.

If there is a problem with the system, you can only reinstall the system, or see if there is a system restore in the advanced options.

Are you multi-system? Why does the system work on the D drive?

You can use the USB flash drive PE tool to enter the PE system, and then look for the log file in the figure to see what the problem is.

If it really doesn't work, let's redo the system.

You may need to reinstall the system, generally do not try to find the system installation yourself, you can find a professional. If you need additional guidance, you can follow it up and ask me.

The system has been compromised and the system needs to be reinstalled.

What is the current situation, and if this is still the case, it is recommended that you try to change the MedicaCreationTool tool to upgrade.

In this case, it is recommended to use 360 Security Guard to repair it with a comprehensive physical examination, and restart the computer after the repair can be normal.

Turn off the power and reboot, it will continue.

Power off, reinstalled, with broken documents.

It is possible that the system files are corrupted.

System File Corruption Solutions:

1. Press F8 to press F8 to get the advanced option to appear in the release of the power, and select "The latest correct configuration" Enter to repair.

2. Please boot the computer and press F8 to enter the safe mode, use the system's built-in system restore, and restore it to the time when you did not have this failure.

3. If the fault persists, use the system disk to repair it, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare the repaired.

4. If the fault persists, set the optical drive in the BIOS as the first boot device, insert it into the system installation disk, press the R button, and select "Repair Installation".

5. If the fault persists, it is recommended to reinstall the operating system.

If it really doesn't work, it is recommended to choose repair installation, so that the system can be repaired, and the programs and files of the C drive can not be lost.

Open the Notifications button at the bottom of the screen or go to your computer's settings page from the Start screen.

How to do a win10 reset?

In the settings page, find the "Update & Security" button and click it to enter the Update & Security page.

How to do a win10 reset?

Click on the "Recover" button, then find Reset Secondary PC, click on the "Start" button.

How to do a win10 reset?

Two options pop up, the first one is "Keep My Files" and the second one is "Erase Everything". If you want the reset system to be cleaner, you can select "Erase Everything".

How to do a win10 reset?

Then wait for a while, the following page will pop up, prompting that your computer has multiple drives, and then asking you is "Do you want to delete files from all drives?" "It is recommended that you select" only the drive with Windows installed, so that it will only be processed on the system disk, otherwise all the disks will be formatted, then you will lose all your files.

How to do a win10 reset?

How to do a win10 reset?

Restart the computer, if it still doesn't work, restart it and press F8 to enter safe mode, and see if it can be used in it.

There is an error in the update system, which is caused by the installation failure, reinstall it!