What to do if your Roger Dubuis watch is scratched

How to deal with scratches on the watch case:

1. Local deep scratches on the case or strap need to be done locally before repairing, depending on the location, such as the shell side of the case, it is even possible to use a fine small file, more oil stones, and then under the magnifying glass, carefully boring the deeper scratches, if there are deep scratches, it is necessary to focus on polishing the local oil stone first, when the scratches are basically ground and smoothed, choose sandpaper with appropriate particle size, and grind along the original sand pattern.

2. All the scratches on the watch case and strap, if you want to remove it or make a refurbishment and beauty of the watch appearance, you can refer to this method. The straight-line shape of the pattern is easier to do, if the pattern is concentric, then it should still be done by using electric machinery.

3. It is not difficult to repair the scratches on the case strap with sandpaper, as long as you are careful and steady, you can do it well; But for the surface is polishing process, then you must use a cloth wheel polishing machine, and ordinary people can't do it.

4. For the case and strap with sand-drawn and polishing process, the sand-drawn sanding should be done first, and then the polishing and polishing should be done when trimming, but it is necessary to cover the sand-drawn parts that have been trimmed.

When there are scratches or slight scratches on the crystal of Roger Dubuis watches, you can first drop one or two drops of water on the watch crystal, then squeeze a little toothpaste, and then wipe back and forth with a cotton ball to remove the scratches and make the glass as new.

In the case of severe damage such as explosions, broken corners and severe breakage, and debris covering the dial, the following measures need to be taken immediately:

1. The first thing is to stop the watch. Pull out the watch handle and stop the watch from running. Pulling out the handle allows the watch to stop, preventing the hands from scratching the dial and date by driving glass shards.

2. You must not dial the hands and the fast-setting calendar, and you must not try to remove the broken glass of the dial by yourself.

3. Before sending the watch to the watch repair shop for maintenance, be sure to put the watch flat (preferably with the glass side down) into the box, and do not produce violent vibration and shaking during the repair. Yes[8th Floor, Block E1, Oriental Plaza Office Building, No. 1 East Chang'an Street, Dongcheng District, Beijing].Dispose.

When a watch is scratched, it can be polished, worn, and polished to make the worn watch look new. If there is a serious bump that causes a hard injury, a smash and a dent, the repair process is relatively complicated.

Now all the watches of a bit of grade are basically sapphire crystals with anti-wear resistance and high hardness in the selection of glasses. Even when your case has been scratched into a map, your glass is still as bright as new. Although sapphire crystals are more wear-resistant, they are also fragile, and broken crystals are very common in watches, so what should I do if the glass is broken?

Today, let's talk about what you should pay attention to when the glass of a Lange watch is broken.

Different degrees of glass damage are also different in the treatment, such as the corners of the breakage, in life, due to the different external forces, the characteristics of Lange & Söhne watch glass problems are also strange. However, depending on the degree of damage to the Lange glass, we can distinguish between minor scratches, scratches, cracks, broken corners or complete breakage.

Minor scratches affect the aesthetics and can be replaced with a delay without affecting the waterproofing of the Lange watch. Cracks in the crystal, which need to be replaced in a timely manner, and need to be kept away from liquids before replacement, so as not to penetrate the Lange glass and cause corrosion on the inside of the watch.

If the glass is broken, please send it to: Room 3705, Building 2, Grand Gateway Center, No. 3 Hongqiao Road, Xuhui District, Shanghai.

The watch glass is broken! What should I do? Mild: When the watch is accidentally scratched or cracked, it needs to be replaced in a professional watch store as soon as possible, although it can be used temporarily, but it is not waterproof or dustproof, and it will affect the use of the watch with precision operation.

Severe: Bursts, crumbling corners and severe breakage, debris all over the dial, take immediate action as follows:

1. Stop the watch: pull out the watch handle to stop the watch, so that the pointer does not drive the glass chips and scratch the dial and the date disc.

2. You can't dial the hands, you can't adjust the calendar, and you can't try to remove the broken glass of the dial by yourself.

3. Place the watch flat (preferably with the glass side down) and put it in the box to ensure that the watch is not vibrate.

4. Send it to a professional watch shop for repair immediately.

If the glass on the surface is completely shattered, and the broken surface is inward (towards the dial side), glass shards will be all over the dial. We have to pull out the crown and stop the watch, and we must not dial the hands or set the date quickly. Lay your watch flat (preferably with glass side down) until it is sent to a watch repair shop.

Tell watch repair shops to be careful not to let glass chips damage the dial and hands during disassembly and repair.

Roger Dubuis glass is broken due to bumps, because the glass has slag must be cleaned a series of times, otherwise the slag will penetrate deeper and deeper will lead to deep damage to the internal structure, to clean and replace the glass in time, you can immediately clean and replace the glass when you arrive at the store.

It is recommended to replace the mask in time to avoid accidental water ingress and unnecessary losses. When the watch completely bursts and the glass chips are all over the dial, it is necessary to immediately pull out the watch handle and let the watch stop to prevent the glass from scratching the dial. In the process of sending for repair, it is best to lay the watch mask down flat and try not to shake the watch.

Depending on the degree of damage to the glass, there may be scratches, cracks, broken corners, and complete breakage. If the corners are broken and completely broken, the glass of the watch must be replaced.

Table Correct treatment method for glass breakage:

1. Never dial the needle, nor can you adjust the calendar quickly.

2. Remember to pull out the watch handle, let the watch stop, and immediately send it to the after-sales center 3. Avoid severe vibration and shaking during the repair process to cause the watch to be damaged twice.

The above treatment method is to prevent the hand from driving the glass shards to damage the dial twice when moving, so as to avoid greater losses.

If there is a problem with the watch, it is recommended to go to the regular after-sales service for maintenance, not only the technician is more professional, the instrument is also more precise, and the **transparent is not messy**. There is a very good after-sales service near Wanling Hui in Tianhe District, so I will go to see it when I have time. My personal advice is to pass as soon as possible, otherwise the longer the time, the greater the problem with the watch, and the greater the economic loss.

The main thing is that it is still more troublesome, and the repair time will become longer.

There are generally two types of broken crystals, one is broken corners and the other is completely broken, and in both cases, the crystal must be replaced. The breakage of the watch glass will not only cause the watch to lose its sealing, which will further affect the water resistance. Judging from the material of the watch glass, the plastic glass used in old-fashioned watches will not burst, while the mineral glass glass, especially the popular sapphire glass, is prone to bursting.

So what to do if the glass is broken?

1. Let the watch stop running for the first time. Pull out the crown and stop the watch. It is to prevent the hands from scratching the dial by the broken glass shards, causing a second injury to the watch.

And the ** of the dial is more expensive than the glass, whether it is repaired or replaced, it is a lot of pens.

2. You must not try to remove the glass shards on the dial by yourself, let alone dial the hands and the fast-adjusting calendar. Completely shattered, the crystal needs to be replaced immediately.

3. The watch must be squared, that is, the glass side down, placed in the box, but sent to Room 602, Block W3, Oriental Plaza, East Chang'an Street, Dongcheng District, Beijing. Try to avoid violent vibration and shaking during the repair.

Treatment method of epidermal rupture:

1. Pull out the watch handle and let the watch stop.

2. How to deal with the crackage of the watch? Never dial the hands, nor can you quickly adjust the calendar3, the watch is placed flat (preferably with the watch masked facing down), and the watch should be placed flat until it is sent to a watch repair shop.

4. Do not do violent vibration and shaking during this period.

5. Instruct the watch repair shop to be careful not to let the glass chips hurt the dial and watch hands during disassembly and repair.

If there are rust stains on the dial of the watch, the watch has been flooded. Rust on the dial will not only affect the normal use of the watch, but also may reduce the service life of the watch, it is recommended to send it to a professional after-sales maintenance center for repair immediately.

If the watch is not treated in time after water ingress, it is easy to cause the movement, dial, hands and other internal parts of the watch to rust, which may reduce the service life of the watch.

For some expensive watches, you need to pay more attention to maintenance in use, regularly clean the stains on the watch case, and maintain the watch every 2-3 years or so.

First of all, this lifting out of the 100 watch burning high crown should be pulled in time to stop the movement, to prevent the hands from scratching the watch, dial or damaging the dial.

Secondly, after pulling out the crown, please repair it in time to avoid the dust of the watch from entering.

Third, if the degree is a hollow watch, try to avoid the small hands falling into the back of the dial.

Fourth, when installing both hands, pay attention to choosing a formal mechanism to prevent scratching the improper operation of the dial plate, resulting in a decrease in the waterproof performance of the watch.

In general, maintenance is relatively easy if there is no damage to the inside of the watch. If the wheel tube is deformed, broken, or the parts are worn, the repair will be slightly more difficult. Please note that watches with hands need to be fully tested for water resistance, and the waterproof ring will need to be replaced when the old forest section is aged.

There are several phenomena or degrees of water ingress into the watch:

1) There is fogging in the glass of the watch, and there may be some times and sometimes not, especially when the temperature difference is large.

2) There are water droplets condensing in the watch glass.

3) A large number of water droplets can be seen on the glass and dial of the watch.

There are also several properties of the water into which the watch is ingressive

1) Purified or distilled water.

2) Tap water or rainwater.

3) Drinks or beer.

4) Sea water. 5) Cosmetics or chemical reagents or potions.

Generally speaking, there are only three places where water can enter the watch movement: the handle (handle), the watch mask and the back cover. The waterproof device is also installed in these three places: add a rubber ring to the shank, add a rubber ring on the threaded edge of the back cover of the sealing ring, shank and other parts, and make the surface tight.

Water and fog into the watch has the greatest impact on the watch movement, and it should be dealt with in time to prolong the service life of the watch. If not treated in time, the residual moisture will easily cause the internal movement to oxidize and rust, resulting in inaccurate watch timekeeping and watch failure.

If the watch is seriously flooded, please send it to the repair center immediately for treatment, otherwise it will cause many metal parts inside the movement to oxidize and rust due to water vapor, causing greater damage.

What to do if the watch gets water.

It is normal for the watch to get water, if the water is not serious, but there is a layer of fog in the watch glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, and bake it for about 30 minutes at a distance of 15 cm from a 40-watt light bulb to eliminate water vapor. Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating. You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours.

Of course, there are also some daily repair methods for watches to get into the water:

1. Dry the granules with silica gel. If water enters the case, you can use a granular substance called silicone to put the watch in an airtight container with the waterlogged watch, and after a few hours, remove the watch and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch.

The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

2. Bake with a light bulb. If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes to eliminate the moisture. Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating.

3. Wear the watch backwards. You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours. If the water ingress is severe.

Water into the watch Generally, there is water mist or water droplets on the watch glass, which will corrode the movement after a long time, resulting in inaccurate or non-time, so the earlier the watch water ingress treatment time, the less damage to the movement, the recommended treatment method is as follows:

Law. 1. Place the vent - dry the watch with a dry paper towel and then place it in a cool and dry vent for a few hours, and do not place the watch directly in the sun or dry, which is to prevent water mist from flowing into the movement.

Law. 2. Silicone drying - for the water inlet of the mechanical watch, you can use the granular substance of silica gel to absorb water, put the two in a closed container, and take it out after a few hours, and the water mist inside will be cleaned up; If it is a quartz point clock, you can take a few small pieces of calcium chloride, wrap them in gauze, and then open the electronic watch cover and seal it.

Law. 3. Wipe oil and remove rust - method 1 and method 2 can only clear a slight water mist, and for some more serious water ingress, these two work earlier, which is not enough for the rescue time of the movement, at this time it is best to find a professional watch repair center for ** maintenance, oil wiping treatment.