-
Anonymous users2024-02-07Step 1: Hold the handle with your hand and shake the surface of the umbrella to prevent the surface of the umbrella from becoming entangled with the bone and sometimes injuring the bone or surface when opened.
Step 2: Press the button of the up arrow towards no one or anything.
Step 3: Press the down key while retracting.
The last step: press and hold the head and tail of the umbrella and press it back in.
This is the approach I saw on China Umbrella Trading**.
-
Anonymous users2024-02-06There is a button at the pole and the umbrella bone, press it, and the umbrella will come down.
-
Anonymous users2024-02-05Hold the handle of the umbrella with your hand and shake the surface of the umbrella to prevent the surface of the umbrella from becoming entangled with the bone and injuring the bone or surface when opened. Open the umbrella and press the button of the up arrow to open it when there is no one or something.
Hold the handle of the umbrella with your hand, shake the umbrella surface fully, this step should prevent the umbrella surface and the umbrella bone from being entangled, do not hurt the umbrella bone or the umbrella surface when opening, and press the upward arrow button to open it in a place where there is no one or no object. When retracting, press the downward arrow, press and hold the head and tail of the umbrella in both backs, and press it back in.
The automatic umbrella is composed of umbrella cloth, umbrella bone, umbrella hoop, spring, top hat, string, etc. The metal rod that passes through the rod is connected to one end of the umbrella bone by a string, and the switch on the umbrella handle is connected to the bottom. The closing of the switch drives the metal rod to move up and down, acts on one end of the umbrella bone through the string, and drives the other section of the umbrella bone covered with umbrella cloth to warp or fall, and the umbrella to open or close.
The springs in the canopy are used to overcome the excessive tension of the canopy. The automatic umbrella comprises an umbrella surface, an umbrella rod, an umbrella handle, a support rod, an umbrella surface support rod, and a support rod connecting seat, and is characterized in that: a linkage mechanism is composed of a moving switch, a wire rope, an upper and lower bearing, a gear and a transmission chain, and is installed in the umbrella rod.
Install a bearing at the top and below the umbrella rod respectively, use the wire rope ring to set on the two bearings, open a "Z" shaped mobile switch seat hole at the appropriate position below the umbrella rod, and connect a switch that moves up and down with the wire rope at the wire rope at the corresponding position. One side of the wire rope above the umbrella rod is connected with a section of transmission chain with the wire rope, and a gear is installed on both sides of the umbrella rod at its corresponding position, and the gear and the transmission chain are meshed and rotated, and a plurality of umbrella surface support rods are respectively fixed on the gear.
-
Anonymous users2024-02-04The solution to the automatic umbrella that cannot be opened is: gently pull the umbrella bone, press the switch to try several times, pull the umbrella surface hard, scrape the switch with your fingernails, and disassemble the umbrella bone.
1. Gently pull the umbrella bone: the automatic umbrella can't be opened because the umbrella bone is stuck, at this time we can gently pull the umbrella bone, let it loosen, and then press the switch to open the umbrella.
2. Press the switch and try a few more times: the automatic umbrella can't be opened because the switch is not pressed in place, at this time we can try a few more times, press the switch to force hard, until we hear a click, it means that the umbrella has been opened.
3. Pull the umbrella surface hard: The automatic umbrella can't be opened because the umbrella surface is stuck in the socks, at this time we can pull the umbrella surface hard to let it loosen, and then press the switch to open the umbrella.
4. Scrape the switch with your fingernails: The automatic umbrella can't be opened because the switch is blocked, at this time we can scrape the switch with our fingernails, and the macro friend will let it loosen, and then press the switch to open the umbrella.
5. Disassemble the umbrella bone: the automatic umbrella cannot be opened because the umbrella bone is stuck, at this time we can disassemble the umbrella bone, clean up the stuck place on the umbrella bone, and then press the switch to open the umbrella.
Do you use Chinese or English? I use my solution in the English version of the p, and it should all be the same. The steps are as follows: >>>More
The automatic toilet is still relatively easy to use, it is a relatively high-end product, and the functions of this product are also more, but in order to ensure the quality, you should consider using the brand when you choose. If you use a fully automatic toilet, first of all, it will change personal hygiene habits, this is the beginning of people let you into a healthy life, you have to know that flush every day, so that it helps to defecate, it helps us to detoxify the intestines, let us nourish the skin, remove freckles, health and longevity. You have to know that like the automatic toilet, it has a temperature on the seat, and it has the function of helping people clean their buttocks, if you feel that the temperature is not enough, you can also heat it, you can almost warm it to dry, it also has a place designed for women's special flushing, and some also have massage flushing, learn more about Qijia.com (www deodorization function, etc., the purpose of this is to completely remove the feces in the body, help us better remove toxins and garbage in the body, In this way, our bodies will also be healthy. >>>More
How to use the electric shear: connect the power cord, try the real reversal of the motor, it can be used normally in the case of the positive rotation of the motor, step on the foot switch, or the foot rod shearing machine will cut, step on it once, and the shearing machine will cut once. >>>More
Is it a wave wheel type or a drum type or a dual power one?
In order to save water, the washing machine must reduce the number of rinsing, reduce the number of rinsing, and involve the use of electricity and detergent, water, electricity consumption, and the quality of detergent are the interrelated elements of water saving in washing machines. >>>More