When the engine comes to three revolutions, the speed will be reversed, I hope you can guide me, tha

It is normal for the idle speed to be high at startup. Cars need high speeds to get the engine to reach normal working conditions as soon as possible, and they need a thicker mixture, so the air intake and fuel injection will increase, resulting in high speeds. The colder the weather, the lower the water temperature (higher than the normal working temperature of the engine, generally about 85-110 degrees), that is, the greater the temperature difference with the normal engine operation, the computer will control the cold car to idle, that is, the higher the engine speed when it is just started.

Under normal circumstances, according to the different water temperatures, the idle speed of the engine will slowly decrease from more than 1200 until the engine reaches the normal working temperature and reaches the standard idle speed of about 800 rpm.

If the engine is added to three revolutions, the revs will be stolen back, which should be a problem equivalent to the impulse. After the buffer, it will arrive at the station.

It means that the oil is not good, and you still have spark plugs.

This engine is mainly affected by the oil.

What will happen when the switchboard waits until three drills are reversed in the future? I hope you neighbors will come to thank you for adding 13 drill drills to the engine, unless it is reversed what is the situation? I hope you can marry this three diamonds and quickly return to what will become?

What will happen to the arrival of three drills in the future of this engine? This song is a few to a few hits of this

At this time, if you go back and come back, it should be that the setting does not meet his regulations, so reset it.

Will there be three turns? What's the situation? I feel like I can take a look at that directly.

The engine will be reversed when it comes to three revolutions, which may be a problem with the engine failure, probably because the engine is faulty. You should ask a professional to take a look.

Well, I can't just stick to a diamond that will be upside down, in fact, I'm hurrying. But this is not the case.

If the engine revs at three speeds, it should come back to these situations.

What drill speed in your house will be reversed, and what is the situation? The image of the advertisement knows, anyway, we caught it last night and then came back, it may be caused by the exhaust shift or other incoordination.

What happens when the engine's three positive integers are reverted back in the future? You give me a guide.

When the engine is added to three revs, it rewinds.

Hello, I am happy to serve you and make a solution for you to make such an exciting solution as the crude lead stove: let the engine turn for a while and not turn for a while, which can be achieved by adjusting the speed of the engine. 1.

First, check your engine's fuel system to make sure that the fuel** is normal, that the fuel pressure and fuel filter are clean, and that the fuel pump and injector are working properly. 2.Check the ignition system of the engine to make sure that the spark plug is normal, the ignition coil is normal, the ignition advance angle is correct, and the ignition controller is normal.

3.Check the engine's exhaust system to make sure that the exhaust duct is not blocked, the exhaust is normal, the exhaust pressure is normal, and the exhaust temperature is normal. 4.

Check the engine's cooling system to make sure the water tank level is normal, the water pump is normal, the water pipe is not leaking, and the water temperature is normal. 5.Check the speed control system of the starting rock machine to ensure that the throttle is normal, the throttle controller is normal, the throttle control circuit is normal, and the throttle controller is adjusted correctly.

6.Finally, according to the speed control system of the engine, adjust the speed of the engine so that the engine does not rotate for a while.