How does VideoStudio 10 make its dubbing and original sound exist?

This painting can be done, but it is difficult to do it perfectly, such as whether there is still some background sound in the original ** dialogue, and the dubbing is not; There are also inconsistencies in the environment, sound effects, etc., resulting in a fake sound. Even so, the production method is given: right-click to import **track**, select "Split Audio" in the menu that appears, and the audio will be split into the sound track, and then use the scissor tool to split the dialogue between two people to the sound track, one of whom needs to eliminate the beginning and end of each sentence of the voice that is ready to be dubbed, and then right-click on the cut speaking file, and select Delete in the menu that appears.

The rest of the person's speech was deleted in the same way. The next step is to use the recording function of painting sound and shadow, and use the microphone for the person in the ** dialogue form, and connect the dubbing of a person's speech sentence by sentence, and the dubbed sound is on the ** track. (You can also drag the split audio from the sound track to the ** track after splitting the audio, and cut the dubbed file to the sound track).

<> "It's so simple to put ** in it.,If you want to make rich and good-looking animations,That's your technique.。 You have to learn this technique, and if you like to do it, then you can find a tutorial to learn it.

If you're using your own voice, record it in VideoStudio, and if you're using another audio file, drag it to the soundtrack.

Video. <>

2.Right-click on the track and select Insert Audio from the drop-down menu, select the To Track option, and import the audio;

3.Drag the shuttle mark to see which part is more, find the location, and click the scissors to segment the excess part;

<> select WMV here;

6.Enter the name of the file, save it on the desktop, pop up the rendering dialog box, and complete the operation when the rendering is successful.

1. Stop the cursor at the place where you want to add narration, click Record to capture option 2, and click Narration.

3. Adjust the volume, click the start button, and start recording the dubbing you want to join, you can directly record the dubbing and add it to the audio track.

2.Whether the VideoStudio is muted or not, as shown in the following figure:

3.Whether the computer volume is turned on, as shown in the figure below

4.Whether the power and volume of the speaker are turned on, and whether there is a problem with the speaker.

It was recorded directly on DV.

Now the card machine is silent.

So you have to transformat.

Let's turn it in a format factory!

Summary. Hello, glad to answer for you. According to the situation mentioned above:

How VideoStudio retains the original sound and deletes the dubbing. A: To keep the original sound and delete the voiceover, you can follow the steps below:

Right-click the clip on the timeline and select "Delete Audio Track". 3.Once the deletion is confirmed, the voice over of the clip will be deleted, leaving only the original sound.

4.If you need to adjust the volume or other properties of the original sound, you can right-click the clip on the timeline and select "Audio Properties" to adjust it. 5.

Finally, when exporting, select "Keep Original Audio Track" so that you can keep the original audio and delete the dubbing. It should be noted that if there are important voiceovers or sound effects, removing the voiceovers may affect the quality and visibility of the voiceovers, so you need to think carefully before deleting the voiceovers.

Hello, glad to answer for you. According to the above situation: how does VideoStudio retain the original sound and delete the dubbing.

Answer: To keep the original sound and delete the dubbing, you can follow the steps below:1

3.Once the deletion is confirmed, the voice over of the clip will be deleted, leaving only the original sound. 4.

If you need to adjust the volume or other properties of the original sound, you can right-click on the clip on the timeline and select "Audio Properties" to adjust it. 5.Finally, when exporting, select "Keep Original Audio Track" so that you can keep the original audio and delete the dubbing.

In this way, the original sound was also deleted. I want to keep the original vocals and delete the ** that is in the middle of production.

2.Find the clip on the timeline that you want to delete the dubbing and drag it onto the audio track. 3.

Select the clip on the audio track, right-click "Belong to Sidematching" or press the "Enter Material Properties" button to enter the audio material properties interface. 4.In the audio material properties interface, find the "Volume" column and set the volume to 0, so that you can delete the voiceovers that do not match **.

5.If you need to readjust the original audio back, you can use the Fade in and Fade out fade volume effect to bring the audio back to its normal volume level. 6.

Finally, the new file retains the original, and there is no dubbing. It should be noted that before deleting the audio, please confirm whether the original ** and audio materials have been backed up, so as not to be unable to recover after an accident. At the same time, when using VideoStudio, you also need to pay attention to copyright issues, and do not delete or tamper with the audio or ** materials produced by others at will.

Question 1: Hurry! How do I use the recordings in VideoStudio? One. Select Toolbar Audio.

Two. See below the logo with the recording microphone, point to excitation test, click on the recording.

Three. After recording, the ignition stops. The recording is automatically displayed in the soundtrack.

Question 2: VideoStudio X5 recording function is in** Click on the icon with a red dot on the track and see it inside.

Question 3: How to save audio files for VideoStudio? The recorded audio file is on the sound track, and the recorded sound is connected together to form a whole audio file after cutting the stem; Import the background into the track, and after editing, delete all the unnecessary ones and listen to them as a whole.

Finally, Share - Create a sound file - Save the desired sound file format, and create your desired theme, copyright information, etc. in the save option.

Question 4: How to record with VideoStudio? in mode. After clicking on the audio track. Record sound at the point. Just press start. It depends on the level indication.

Question 5: How to record the sound in the computer? 5 points VideoStudio The recording function here is to record with a microphone, plug in the microphone, click to start, and you can record the sound from the microphone.

It is not possible to record sound directly from the computer. I'm also experiencing the same problem, I want to record ** on the computer, and I can't record it directly with VideoStudio. Later, I came up with a solution, which was to make a self-made cable with 3mm audio plugs at both ends.

Plug one end of this cable into the microphone jack and the other end into the headphone jack. Then use the recording function of VideoStudio to record, so that you can record the sound in the computer. This is my personal experience for reference.

At the same time, use the microphone icon with "recording" in the "audio" item of the painting sound and shadow, and use the microphone for post-dubbing recording. The recorded dubbing is on the sound track of Picture Painting. Then import the skit, split the audio and delete it.

Question 7: How to record VideoStudio X7? At present, VideoStudio recording and ** are synchronized, and it will naturally be recorded when you record**. If you only need to record, you can separate the audio in the track. Hope it helps.

1. Stop the cursor at the place where you want to add the narration, and click the Record Capture option.

2. Click Narration.

3. Adjust the volume and click the start button to start recording the dubbing you want to join.

You can directly record the dubbing and add it to the audio track.

VideoStudio x8 64-bit.

VideoStudio x8 32-bit:

If it helps you, hope in time!

Question 9: How to use VideoStudio software to add your own recordings to **? 5 points You click the left mouse button on the sound channel of VideoStudio, there is an option to record in the middle of the interface of VideoStudio, and you can record!

Question 10: How do I dub on VideoStudio? Hello,The dubbing of VideoStudio is generally recorded first,And then through the audio track import and then slightly adjusted,If you are a novice to VideoStudio,It's best to join a group of VideoStudio lovers to learn,Tencent group search:

VideoStudio can find a lot of VideoStudio technology groups, if it helps you, please choose me as, thank you!

1: First of all, I must tell you that the left and right channels are the products of VCD, and now no one plays them, they are eliminated, and there is no point in **!

2: What are you going to do? I didn't get it!

3: Drawing can eliminate any one of the left and right channels recorded separately by the original VCD, and can leave accompaniment or vocals;

4: Your ** seems to be a split-channel recording, then, point audio--properties--- see the left and right channels--operation can be silenced (VCD), are you misoperating here, there will be one less channel, try?

5: By the way, at present, they are all *** karaoke, which is the following audio tracks recorded in the split track: accompaniment, vocals and accompaniment, vocal channels, etc., when singing, the accompaniment track (stereo binaural), when listening to the song, the vocal and accompaniment tracks are played that is, the original song (stereo binaural or vocal channels), and you can also burn more audio tracks*** discs, and multiple channels can be included in one audio track.

This is a matter of the audio source file, and you can proceed to the audio channel.