How to make wildflower specimens 5, how to make wildflower specimens

Updated on science 2024-04-15
6 answers
  1. Anonymous users2024-02-07

    Many of the flowers we put on a daily basis can be made into dried flowers, especially bouquets that have special meaning for us, which can be stored for a longer time after being made into dried flowers. We can also buy flower petals, dry them and make them into sachets, which is very cheap. The easiest and most natural way is to tie the flowers into bunches and place them in a warm, dry place to dry.

    This is what we usually call air-drying. However, some flowers will be deformed and even deteriorate when dried in this way. If you want the flowers to dry longer, you can use a microwave oven to help.

    Dried. Air-drying is one of the simplest and most commonly used methods of making dried flowers, choose a warm, dry and well-ventilated room, and the indoor temperature should not be lower than 10 degrees Celsius. Well-ventilated cabinets, heated rooms, or penthouses, attics, etc. are all good.

    Flowers have decorative value during the drying process, so you may want to consider using your bedroom and dining room as a place to dry them.

    Perennial wildflowers, hydrangeas, delphiniums, mimosas, tansy and other flowers need to be tied upside down with fine twine and hung upside down on clothes hooks or strings, but be sure to stay away from the wall. Papyrus, lavender, and pampas are dried in large open containers so that they can be spread out in a fan shape. Some flowers can be laid flat on a shelf.

    The time of air drying varies with the type of flower, air humidity, and air temperature. In a warm, dry room, delphinium dries out in just two or three days, but in a slightly cooler shed or utility room, it takes eight to ten days. You have to remember to go and smell every two or three days, and if your flowers feel so brittle, you're done.

    Microwave dry.

    Microwave drying is a new method, characterized by a short time and no need for anything else**. This drying method is suitable for those flowers that can be air-dried, such as herbs, daisies, roses, calendula, etc., and some grasses such as pampas reeds, thistles, papyrus, etc.

    The time to dry in the microwave depends on the type of oven and the number of flowers, and some berries are easy to break in the microwave, so first place them in a cool, dry, ventilated place to air dry for at least a week.

    Dried flower sachets. Nowadays, the most commonly used flowers in dried flower bags include: jasmine, rose, white orchid, gardenia, osmanthus, lavender, osmanthus and vanilla such as lemongrass, perilla, etc.

    Roses, lavender and other petals are naturally dried to a certain extent, and the bottle is filled with the scent of roses or lavender by lifting the cap slightly. Wrap and store your favorite scents and enjoy them at any time. To do this, bake the flowers in the oven at 50 to 80 degrees until they are completely dry.

    Once the vapor has dissipated, place it in a small glass bottle that has been prepared. It can also be tied with a handkerchief petal.

    Sew a cute pouch with a small flower cloth, or make four pouches out of a handkerchief, fill it with dried flower petals and put it in the wardrobe, and it will make all the clothes stained with a floral fragrance. It can also be carried in a carry-on bag.

    There are also some ladies who like to use pillows with dried rose petals, which will bring sweetness even to sleep. If you have more dried lavender, fill it with a large cushion or two and place it next to the computer in the workshop to refresh your mind.

  2. Anonymous users2024-02-06

    Just take a paper towel with good absorbency and press it with a lot of books, although it is flattened, it can be stored well, and the color will be retained.

  3. Anonymous users2024-02-05

    Books are depressing.

    Choose relatively intact flowers, as they will reduce the ornamental quality if they are missing. Trim the collected flowers with scissors to remove the parts that affect the appearance. After that, use a bristle brush to gently brush the various parts of the flower.

    After finding a book, the liquid head put the flowers neatly in the book, and finally close the book and put it in a warm and dry environment, when the flowers become dry, you can take out the flower specimens, pay attention to handle gently.

    It can be glued to the card after drying or saved for other purposes. After pressing the specimen, it is necessary to be careful not to let it out of the sun, as if it is exposed to sunlight, it will change color.

    If it is a dried flower, it should be simply disposed of first, put it in a beaker with tap water, and boil it with an alcohol lamp to make the flowers soft, but do not cook them for too long, otherwise the flowers will lose their elasticity and will be easier to break.

    Preservation of flower specimens:

    Fresh petals cannot be stored fresh for a long time, only dried flowers. It should be dried quickly with hot air as much as possible, and the cut flower head should be hung downward, so that the top of the stem can be kept rigid during the drying process, and the cut flower can be hung on the iron wire or shelf to be dried, and not with a plastic bag, because it is buried back to prevent the water from spreading and causing mold.

    Alternatively, you can use a relatively clean and dry fine sand, then find a printer paper and make a carton that can hold the petals, then pour the petals into the carton with fine sand, and finally, put the carton in a dry place.

  4. Anonymous users2024-02-04

    The methods of making flowers include natural method, pressing method, drying method, etc. God stupid

    1. Natural law.

    This method is suitable for grass flowers with more cellulose, pick the flowers, put them in a cool, dark, dry, hygienic air circulation place, and air dry naturally. It is a method used to make natural dried flowers.

    In the morning, after the dew has dried, the harvest is carried out, and the flower stems are pruned to the required uniform length, and the upper leaves, side branches, etc. are removed as needed. 10 branches are tied up with a tool in a bunch, and hung upside down in a dry place, taking care not to bask in the sun, the flower color will fade, etc.

    2. Suppression method.

    This method is the most commonly used method for making flat dried flowers, which is convenient and fast, and the effect is fast. The picked flowers are processed according to the requirements, placed between the hygroscopic paper, and pressed with a heavy object on it.

    Put the picked and pruned flowers into the moisture-absorbing paper flatly, put them on the flat operating table, find a heavy object with a flat section larger than the flowers, press it, put it in a cool, well-ventilated place, and let it dry naturally.

    3. Drying method.

    The drying method, as the name suggests, is a method of rapid hidden chain drying through high temperature, which is generally suitable for flowers and plants that can be naturally air-dried, and the home drying method can be divided into microwave oven drying method and fried sand drying method.

    One of the characteristics of the microwave oven drying method is that it is fast, a flower can be put in and dried in a few minutes, but everyone knows that when the microwave oven is working, the temperature is very high. For flowers to be dried in the microwave, you must choose a flower variety that will not change color at high temperatures, and you must also pay attention to the time control, and control the time before drying.

  5. Anonymous users2024-02-03

    The methods used to make flower specimens include natural drying, pressing and drying.

    1. Natural drying method.

    Keep the flower material in a cool, dark, dry, clean and well-ventilated place and allow it to air dry. It is suitable for grass flowers with more cellulose and is used when making three-dimensional dried flowers. The method is to collect the flowers after the dew has dried in the morning.

    After harvesting, cut the stems to the desired length, remove a small number of leaves, excess side branches and damaged parts, tie them into a proper bouquet with a thin string, and hang the flowers upside down in a ventilated and dry place before the flowers have changed color or are not yet discolored.

    2. Suppression method.

    Collect your favorite flowers, and be careful not to collect poisonous flowers. Using the method of pressing, you can make the flowers dehydrated and dry in a short period of time, wrap them in paper with good water absorption, put a few books or a brick on them, remember to change the paper every day, press it for three days, you can also put it directly in the book, and then open it after a few days, but it is easy to indentation on the book.

    3. Drying method.

    Before making a flower specimen, you need to prepare your favorite flower sample and ensure its integrity. Then, all we have to do is dry the flowers with a hair dryer, preferably using the natural wind function of the hair dryer. Then prepare the glue and paper, apply a small amount of glue to the back of the dried flowers, and stick it to the paper.

    After waiting for the glue to dry, cover the flowers with a transparent plastic sheet and decorate them slightly.

  6. Anonymous users2024-02-02

    How to make a specimen of flowers is as follows:

    1. Natural drying method: put fresh flower materials in a cool, dry air circulation place to let them air dry naturally. Collect flowers after the dew evaporates and dries in the early morning, cut the stems of the flowers into the required length after collection, remove a small number of leaves and excess branches and leaves, tie the flowers into a bouquet with a diameter of 1cm with a thin thread, and hang the flowers in a ventilated and dry place with the heads facing down when the flowers have not yet changed color, and do not let the dried flowers shine directly into the sun, so that it is easy to change color.

    2. Normal temperature pressing method: This method is a commonly used method for making flat dried flowers. Put the flower branches in the absorbent paper, lay them flat on the prepared press plate, press the appropriate amount of weight, and place them in a place with air circulation, and wait for the flowers to be set.

    3. Microwave drying method: put the flowers in the microwave oven and heat them to dry, and generally fresh flowers only need more than ten seconds to complete drying. Due to the high temperature in the furnace, it is necessary to choose varieties that will not change color at high temperatures, and at the same time, it is necessary to choose the appropriate drying time, which can be dried in 30 seconds to avoid the flowers being burned out.

    Extended information: Specimens are animals, plants, minerals and other physical objects that have undergone various treatments so that they can be preserved for a long time and as far as possible in their original appearance, so as to provide them for exhibition, demonstration, education, identification, research and other research purposes. Specimen processing methods can be taken from the whole individual (or even multiple individuals, such as bacteria, algae and other microorganisms, or such as fungi and other small and clustered individuals), or a part of the sample, such as physical air drying, vacuum, chemical embalming treatment, etc.

Related questions
10 answers2024-04-15

Ingredients. Ingredients.

Pigskin. 300g >>>More

7 answers2024-04-15

A different kind of dragonfly specimen! Both the process and the finished product are a pleasure.

16 answers2024-04-15

Preparation of black fish soup.

1. Wash and cut the fish quickly, control the moisture, and set aside. Slice the green onion into sections and slice the ginger for later use. >>>More

10 answers2024-04-15

If you can, give another 5 points!

Braised tofu Dish name: brine tofu. >>>More

7 answers2024-04-15

The description of the design process of the machine has not yet been harmonized, but the differences are not too significant. Propose the goal of designing a new machine according to the needs of production or life, etc. At this point, there is generally only a vague idea of the machine to be designed. >>>More