How to open a 3389 server How to open a 3389 port on a server

Right-click on the "My Computer" property Remote and check "Enable Remote Desktop on This Machine", and it will be opened.

When you work in your company, you can use "Remote Desktop" to connect to your home computer, and log in with your home computer's account and password, which is very simple. Don't pay attention to the network configuration of your home computer, if it is a WAN port such as ADSL, remember the IP address at home, and fill in the IP address at home when the company is connected to achieve the connection.

If you are connecting through a router or other device, you need to configure port mapping on the router. Map port 3389 of the router to port 3389 of your home computer, and fill in the IP address of the WAN port of the router when you connect to your home computer at work, because the router has already provided you with the mapping.

Port 3389 is related to Remote Assistance, as long as Allow Remote Assistance to connect to this computer is turned on, this port will be opened, as shown below:

Use all the programs on another computer – the remote desktop connection under Accessories to remotely control the computer on which remote assistance is enabled.

Remote desktop connection needs to enter the IP address of the other party to determine the location of the other party It should be noted that both parties to the remote desktop connection need to be in the same network, such as the same LAN or the same Internet, and cannot directly control the computer in another LAN from the Internet, if you want to access, you need to map the port on the router or firewall, but you can use the computer in the LAN to control a computer in the Internet. Therefore, if the controlled computer uses ADSL dial-up network to access the Internet, the IP address required by the remote desktop is the Internet IP address obtained after dial-up, not the LAN IP address set by itself.

I solved this problem directly, and I can easily get the 3389 port.

I've tried the online method, but I still think it's a little easier.

The 2003 setup is as follows:

1. Right-click [My Computer] and select [Properties], enter the [System Properties] interface, click the [Remote] tab, and check [Enable Remote Desktop on This Computer].

By default, the XP system only allows users in the Administrators group to connect to remote desktops.

3. At the same time, it should be noted that the service of terminal services has been started (it has been started by default), click the start-run of the desktop to enter the service management for setting.

A port is associated with a service or application. It's not that you just want to open a port and then you can provide services. You must know what service the port provides, which application the service corresponds to in the system, and you must know how to start the service through the application or the service console.

Once the service is launched, you of course open the port.

My Computer --Right--Properties--Remote Desktop; Remote Assistance: Tick it!

Port 3389 is Windows

server

The service port of Remote Desktop can be used through this port"Remote desktop"If you are connected, you can enter the system administrator's username and password to operate the remote computer as if you were operating the machine, so the remote server will generally close the port for those who modify the value.

Shutdown of port 3389:

First of all, port 3389 is the port opened by the remote management terminal of Windows, it is not a Trojan horse, please make sure whether the service is opened by yourself. If it is not required, it is recommended to turn off the service.

win2000

server

Start -- > Programs -- > Management Tools -- > find the terminal in the service

services, select the Properties option to change the startup type to manual, and stop the service.

win2000

proStart -- > Settings -- > Control Panel -- > Management Tools -- > the service to find the terminal

services, select the Properties option to change the startup type to manual, and stop the service.

windows

How to turn off XP: Right-click on my computer and select Properties --> Remote, and remove the checkboxes in the two option boxes of Remote Assistance and Remote Desktop.

Let me guess you're thinking about security, not programming. When programming, you can use this function to open or close ports.

First of all, your computer's ports are open, and other computers can access your port 3389. If your computer doesn't detect the inside of the program's response port, then nothing else will get any useful feedback. Your computer's operating system will be sent to your port 3389 to discard information**.

Let's look at the firewall, if you have a firewall installed, the firewall can be treated differently for each port. Inside the firewall, you can set a port to open or close it.

In the firewall, turn off port 3389, even if your computer is running port 3389 to detect and the program reacts, the program does not work properly on the other side of the computer now looks like your computer does not have this program, such as not getting feedback.

Step How to open or close port 3389, refer to the instructions of your firewall, each firewall has this feature, and the setup method is similar. Firewalls are set up according to the policy for detailed technical information, see Firewalls, there are many on the Internet. Textbooks have.

Port 3389 is the service port of Windows 2000(2003) Server Remote Desktop"Remote desktop"If you are connected, you can enter the username and password of the system administrator, and you will be able to operate the remote computer like the operand device, so the remote server will generally modify the value of this port or close it.

First of all, port 3389 is the port opened by the remote management terminal of Windows, it is not a Trojan horse, please make sure whether the service is opened by yourself. If it is not required, it is recommended to turn off the service.

Win2000 Server Start --> Program --> Management Tools -- > the service to find the terminal services service item, check the properties option to change the startup type to manual, and stop the service.

win2000 pro start--> settings--> control panel--> management tools--> services to find the hole in the terminal services service item, check the attribute option to change the startup type to manual, and stop the service.

How to turn off Windows XP: Right-click on my computer - > remote, and remove the checkmarks in the remote assistance and remote desktop boxes.