What routers should be used for telecom broadband?

Dual-band unlimited routing will do just fine.

Huawei WS832, 100M broadband is enough. It's not that he has a strong signal. There are not many brands better than him, and there are too many domestic brands worse than him. The main reason is because of ......Cheap. In the early 200s.

If you are not very confident about domestic production, if your house is more than 150 and there are more walls, then Huawei's so-called king through the wall has the ingredient of blowing inside.

Netgear R6300V2 1750M dual-band gigabit ,I've been using this at present,Because there are a lot of computer ** files,So my home broadband rises to 400M,The above Huawei is obviously not enough。 The wifi signal is very smooth except for individual signal dead ends, if you like to stay in the toilet for a long time to surf the Internet, you can try to brush the Merlin firmware, the signal will change qualitatively. Note:

This one is produced in Vietnam, not imported from the United States, and the price is about 600 higher.

If it is 100 megabits and below, just use an ordinary 100 megabit router; If it is more than 100 megabits, you need to use a gigabit router.

Open the e-Surfing Morning Travel Gateway Router Settings in the browser, turn on the wireless network function and set the password after opening. Here's how:

1.Find the default username and password on the e-Surfing gateway router, and set the IP <> the router

2.Enter your IP address in your browser and enter your password to log in.

3.Once you're in, tap on Wifi.

4.Find the WPA password settings, fill in the secret of Qingzhengxin, click on the application, and log in to the wifi through the password set

5.Or click on the verification mode, change to open and you don't need the secret stool code.

6.Click on the app to save, so that you don't need a password, and you can connect to wifi.

1.Open a browser to access the router management page (e.g. tp-link is 2.)Creator password (usually set casually, such as 123456) 3Enter the setup wizard and choose to automatically obtain the IP address when surfing the Internet.

4.Tap Wireless Settings and enter the wireless name or SSID (i.e. router name) and wireless password.

5.Click on the LAN port settings on the left, and select the LAN port message with IP settings""Manually"", and then change the IP address to save the dot type.

6.Tap Restart or factory reset on the left, and tap Restart router.

Yes, telecom broadband must use telecom broadband modem, all operators need to use their own broadband modem to connect to the network normally.

But if it's a router, it's carrier-neutral, and it can be used normally as long as it's set up correctly.

Broadband cat, English name: modem

Definition: A general term for a modulator and a demodulator combined. A conversion interface that enables digital data to be transmitted over analog signal transmission lines.

A modem is a kind of computer hardware, which can translate the digital signals of the computer into pulse signals that can be transmitted along the ordinary ** line, and these pulse signals can be received by another modem at the other end of the line, and translated into a language that the computer can understand. This simple process completes the communication between the two computers.

modem, in fact, is the abbreviation of modulator (modulator) and demodulator (demodulator), Chinese called modem (Hong Kong and Taiwan called modem). According to the homonym of modem, it is affectionately called "cat".

Telecom broadband is not necessary to use telecom routers, other brands of routers can also be used.

Router Setup Method:

2.After connecting, open the browser, it is recommended to use IE, enter it in the address bar to enter the settings interface of the wireless router.

3.You need to log in before you can set other parameters, the default login username and password are admin, you can refer to the manual.

4.After successful login, select the Setup Wizard screen, which will automatically pop up by default.

5.After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and you can click Next directly.

6.According to the setting wizard step by step setting, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, then choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection.

7.Enter the account and password applied for from the network service provider, and the next step is to complete the setting.

Broadband networks, such as telecom broadband, do not have to certify telecom routers. All you need is the modem to dial up the Internet and the router to work normally.

The choice of router only needs to distinguish whether it needs to have a line or a wireless route. If you have mobile Internet settings such as mobile phones, tablets, laptops, etc., you need to install wireless routing, and if you only have desktop computers, you only need to install a wiring by.

The frequency of the router, the router has 150m, 300m and other frequencies. The main difference between 150M and 300M of the router is the difference between the formation of the intranet, that is, the local area network, the bandwidth of 300M can be transmitted in a larger number when the intranet is used, compared with 150M, more computers can be added to the intranet, or the same number of computers can be used when the intranet transmits data The amount of data per unit time is larger, that is, the intranet rate is faster; In the case of wireless routers, the transmit power of 300m is greater than that of 150m.

As for brands, try to choose big brands, such as dlink, tplink, etc.

No, telecom does not sell routers, you can go to the market and buy your own routers. Installing Telecom Broadband Telecom will rent a modem, or users can also buy a modem on their own

A modem (modulator-demodulator) is an electronic device that modulates digital signals to analog carrier signals for transmission, and demodulates the received analog signals to obtain digital information. Its goal is to generate an analog signal that can be easily transmitted and to be able to restore the original digital data by decoding. Depending on the application, the modem can use different means to transmit analog signals, such as using optical fiber, RF radio, or ** line.

A router, also known as a gateway, is used to connect multiple logically separated networks, and the so-called logical network represents a single network or a subnet. When data is transferred from one subnet to another, it can be done through the router's routing function. Therefore, the router has the function of judging the network address and selecting the IP path, it can establish a flexible connection in the multi-network interconnection environment, can connect various subnets with completely different data packets and media access methods, the router only accepts the information of the origin server or other routers, and belongs to a kind of interconnection device at the network layer.

No, any router will do.

No, routers are generic.

No, as long as it is a route, it can be used

Hello, telecom broadband router can ensure that your network is usually, compared to the telecom router is still more affordable, the service staff to help you follow in place. If you don't want to use a telecom router, you can buy it yourself