-
You shouldn't emphasize that you're a girl, hehe. There are so many female teachers in the University of Electronic Science and Technology, they are very professional! Are you a double degree?
That's good! I think there are too many people in embedded research, any engineering student has learned programming, and any electrical student will order a microcontroller. I have been working on chip front-end design for a while, and I deeply feel that many technologies in this field are too mature.
The more mature you are, the more fierce the competition, the more people you learn, and the less advantageous you are. I wonder if you think it's very popular? Embedded is mainly used in various small handheld devices, why do you want to learn about it?
To develop these devices, as long as you have a good foundation and a good memory, you will learn it quickly, and you will feel very mentally retarded, like building blocks. In fact, you can consider being admitted to a public institution and entering a university to work.
-
If you have learned well in your major and have hands-on ability, then you can do development, but doing development is tiring. If you don't feel very good about your professional or hands-on ability, then it depends on whether you are interested in the software development industry, if you are interested, you can try to do development, or easily do testing, if you are basically not interested, then you can consider changing careers.
In my experience, developers are definitely the last to work in a company.
-
Did you graduate? I'm also embedded, it depends on my personal hobbies and personal strengths?
-
Application software development, doing testing is good.
-
Beauty is a good industry in the eyes of laymen, and it feels like beauticians are ...... disseminators of beautyIn fact, there is a lot of pressure or spring power in the beauty industry, and every day is to deal with performance, and it is to speak with data, and now the sales methods of all beauty salons are similar, so it is more difficult to ......do itBut since you like it, you can still learn it hard, this is a technology after all, I believe that you can learn it well and benefit it for a lifetime!! I learned the beauty from Routing, is currently the country's largest chain of beauty enterprises, Hefei has a branch, here is mainly practical to learn faster and better more Ha!! You can refer to the reference ...... above
-
It's good to learn beauty, and since you like it, it's better to learn more, not to mention that beauty is becoming more and more important now, and it will definitely be very popular.
-
What is it used for? If you just watch movies online, buy the cheapest one: less than 2000 is enough, and the monitor is larger (22")。
Mainstream phones from Lenovo or Asus will do.
-
Recommend your high-end graphics card model Large 3D games, design is no problem, 14-inch screen has it.
ASUS K42EI35JV-SL 4800YUANI3 2G 320G 14 inch.
Shenzhou Jingdun K470-i3 D1 4699Yuani3 2G DDR3 500G 14 inch 15 inch screen has.
ACER 5741G(332G32MN) 4699Ԫ i3 2G 320G inch.
Shenzhou Elegance A560-i5 D3 4999Yuan i5 Processor 2G 5000G inch.
-
HP Compaq Presario V3172Tu 600 yuan.
Go down and take a look.
Top 10 notebooks below 5,000 yuan.
Top 10 6000-8000 yuan notebooks.
-
Acer's has been quite cheap lately and of good quality.
-
Recommendations:1The motherboard does not support three-channel DDR3 memory, it is better to buy a first-line brand DDR2 motherboard, the workmanship and quality are stronger than the dual-sensitive one, and the most important thing is stability, MSI P43 Neo3-F is recommended
2.If the memory is changed to another brand Kingston, there are too many fakes, ADATA game Veyron, strong performance, good heat dissipation.
You can refer to these two points.
-
Sweat. You still use AMD to play games. Hard drives and graphics cards don't want these brands on motherboards.
Change to another brand. Seagate is a bit more expensive for hard disks, and graphics cards (Yingchi, Onda, Sapphire, Xunjing, Dilan) are first-line products. The motherboard depends on what you like, the more expensive the better.
-
Let's change the monitor to 23, it's more cool.
Agree with the upstairs, if it's playing games or AMD
-
The graphics card is too high, the cup is a little low, the motherboard is changed to a good brand, and the monitor is recommended to be replaced with Philips 190CW9 (I use this, the price is the same).
The same performance can be won by amd3600-3800.
-
Your friend is right!
Your CPU is well chosen, and it's very cost-effective! The motherboard is not good, it is recommended to change to a Gigabyte or MSI P43 board! Memory for DDRII 800, one, two can be!
The graphics card is a little higher, and it is replaced with the Shadow 9800GT Black General Edition. Enough for you to be cool! The power supply is not good, change to Huntkey or Great Wall, rated at more than 400 watts!
This is my suggestion, please refer to it, I hope it can help you!
-
The graphics card is integrated itself, so why add a graphics card.
Do you think crossfire is good.
Crossfire is used for graphics cards that don't need too high configuration at present.,And if you want to insert an extra graphics card in the future, you can set up such a two-piece spelling up definitely the performance is not as good as one** is equal to a graphics card with a separate display.,The motherboard is replaced by ASUS.。
The overall configuration is good, don't care about the little money.
The hard disk should be larger, because you want to buy a recorder, it can be seen that you have great requirements for the hard disk, 320G hard disk cache has 16M, so not only the hard disk is large, but the most important thing is that the performance of the overall computer is greatly improved.
It's important to pay attention to the performance impact of the hard drive, and it's important to check the hard drive cache.
-
It's okay, the memory is a little smaller, and a 1GB group dual-channel is added. It's better to change the motherboard to Gigabyte, ASUS's is fine, and Onda's is worse.
-
Not bad.
It's just that the motherboard is not very good.
It is recommended to switch to Gigabyte or ASUS.
2G RAM is basically enough.
AMD 5000+ is recommended to buy boxed packs.
-
I'm not an insider, and I've been winning for more than a year, so let's talk about my feelings.
A month about to spend on the car including fuel money 2000 yuan base on the high speed is very stable push back force is very powerful Hehe, the A-pillar sometimes gets in the way Sometimes the head needs to be tilted when turning I think this car is very cost-effective In his price range It should be considered very good Personally, I think the best one Oh It is very comfortable to drive, it is said that the engine of the 2011 model is very fuel-efficient Lou is mainly optimistic about this Try to buy the ** of 2011 Since I drove the victory, I have become more and more fond of this car.
-
If you can add more, it's best to buy a luxury type, which is worth 20,000 yuan.
-
This computer is very good, running daily applications, big games without stress. If you're not an extreme gamer, it's not recommended to turn on cores for overclocking. The so-called open core is that some of AMD's dual-core and quad-core CPUs activate the hidden core in a special way and become a quad-core or six-core processor, spending a small amount of money to enjoy the high-end.
There are not a lot of these CPUs, and the CPUs that can turn on the cores are to attract popularity, and not all CPUs can turn on the cores. Overclocking is the process of letting the CPU run at a high frequency that exceeds a set frequency (processing speed). This will reduce the CPU lifespan, increase the heat generation, and your CPU will have a high default clock rate, which is fine without overclocking.
The motherboard depends on the stability, and the motherboard with this configuration list is very good.
-
The motherboard is not so at least a motherboard of more than 700 yuan graphics card CPU motherboard**It is better to be even.
-
There is hope for a pig class of at least 1000 or more ==
-
Gigabyte GA-870A-UD3
That's what I use.
**If you see if your boss is from Africa, when I bought it, it was 680 mainly for computer use, professional drawing has to be a good graphics card, a good CPU for playing large 3D games, a good point for researching software, a hard disk is better (it's a pity to burn it if you can't get it) lz reveal what your computer is for? Do you have to open the core?
If you want to develop in the direction of embedded software, the most common direction is the direction of embedded Linuxarm, and I think there are about 3 stages in this direction: >>>More
The body of knowledge is something that you slowly accumulate while working on projects, and now even if you learn all of this, it's useless and you don't think you'll be able to remember it for long. When we need it, it is utilitarian and purposeful to learn, and the effect is the best at that time, of course, it is not that we don't learn anything. You first learn the basics, such as Linux installation, interface, operation, C language, and other basic knowledge, and then you can find a project for yourself, or find a bad job in those not very good companies, learn while making money, encounter problems in practice, seek answers, solve problems, and with the accumulation of time, you have your own system. >>>More
In addition to looking at the function of the board, it is necessary to see whether the information it provides is complete, whether it is suitable for beginners, and whether the technical support services are in place. It is necessary to pay attention to these points to choose a development board. >>>More
Embedded programming is also divided into several directions, the bottom layer, the middle layer and the application layer. Choose a good direction based on your personal foundation and interests, rather than learning everything together. Generally, those who graduated from electronic engineering are recommended to study the operating system and the underlying driver, while the computing major recommends the middle layer, because many middleware requires algorithms and a variety of programming languages, as for the application, I personally think it is relatively easy to cut in, master the object-oriented method, and can complete the task very efficiently. >>>More
Summary. Hello, you can improve the performance of embedded ARM programs in the following ways: Writing C programs with a certain style can help the C compiler generate faster ARM **. >>>More