How does the planning change from floor height to height?

If it is a residential or office, it depends on whether it exceeds the required height in the control regulations, if there is a margin, the total height will not be affected after the change, and the change of the floor height will not exceed the maximum constraint of meters, just change it. Business, with a primary focus on the total height.

If the total height control is exceeded, the planning needs to be changed, and the height of a single layer exceeds the requirements, and the capacity should be doubled.

The floor elevation of a building is generally expressed on the ground floor of the current floor or the ground floor of the upper floor.

The elevation of the roof layer is generally represented at the lowest point of the upper surface of the roof structure layer.

Structure diagram refers to the drawing that takes the call relationship of the module as a clue, uses a top-down line to represent the call relationship and indicates the direction and content of parameter transmission, and reflects the software hierarchy from a macro perspective.

Extended Information: Foundation Floor Plan.

1. Draw the positioning axis, the position, size, bottom elevation, and component number of the foundation components (including cushion caps, foundation beams, etc.), and when the foundation bottom elevation is different, the slope diagram should be drawn.

2. Indicate the position and size and number of the load-bearing wall and wall buttress and columns of the structure, and when it is a concrete structure, this item can be drawn separately and indicate the size of the cross-sectional change relationship.

3, indicate the plane position, size, elevation of the trench, pit and the foundation of the equipment that has been determined, and the position, size, elevation of the reserved hole and embedded parts below the elevation when there is no basement.

4. Put forward the settlement observation requirements and the layout of the measuring points (it is advisable to attach the detailed drawings of the measurement point structure).

5. The description should include the depth of the foundation bearing layer and the foundation into the bearing layer, the characteristic value of the bearing capacity of the foundation, the treatment measures and requirements of the backfill of the foundation and the foundation groove, as well as the relevant requirements for construction.

6. The pile foundation should draw the plane position and positioning size of the pile, explain the type of pile and the elevation of the pile top, the depth of entering the soil, the bearing layer at the end of the pile and the depth of entering the bearing layer, the construction requirements of the pile, the test pile requirements and the detection requirements of the pile foundation (if the test pile is done first, the positioning plan of the test pile should be drawn separately), and the allowable ultimate bearing capacity value of the single pile should be indicated.

No.

Generally, the height of an ordinary house is designed in meters. The interior height of the bedroom and living room should not be less than one meter. Generally speaking, the height of the housing floor should generally be between meters, of which the height standard of the second floor is generally meters, and the first floor will be slightly higher if it is a store, generally around meters.

What is the height standard of the house, and the net height of the room shall not be less than meters; In the coordinated standard for residential building modulus edited by the Ministry of Construction, it is stipulated that the floor height size is meters, and the residential design code stipulates that the floor height of ordinary residential buildings should be meters.

During the construction of the resettlement households, they must conform to the unified planning of the city, and cannot increase the height or number of floors or overhang without authorization. The relevant functional departments are responsible for investigating and dealing with violations of urban planning and unauthorized construction.